Amantii WM-FM-26-3623-BG Operating instructions

INSTALLER: LEAVE OWNER’S MANUAL WITH THE APPLIANCE.
CONSUMER: RETAIN OWNER’S MANUAL FOR FUTURE REFERENCE.
SAFETY INFORMATION
WARNING
For yo r safety, always comply with all
warnings and safety instr ctions
contained in this man al to prevent
personal inj ry or property damage.
Do not store or use gasoline or other flammable vapors
and li uids in the vicinity of this appliance.
WM-FM-26-3623-BG
(WM-G190026-1)
WM-FM-34-4423-BG
(WM-G190034-1)
WM-FM-48-5823-BG
(WM-G190048-1)
WM-FM-60-7023-BG
(WM-G190060-1)
WM-FM-72-8123-BG
(WM-G190072-1)
WM-FM-88-10023-BG
(WM-G190088-1)
INSTALLATION /OWNER’S MANUAL
WALL-MOUNT & BUILT-IN UNIT
Version:202201

2
TABLE OF CONTENTS
Please read and carefully follow all of the instruction found in this manual. The instructions
included here will assure that you have many years of dependable and enjoyable service
from your Amantii product.
IMPORTANT INSTRUCTIONS ......................................................................................................................................... 3
FCC CAUTIONS .................................................................................................................................................................. 4
UNPACKING AND TESTING THE APPLIANCE .......................................................................................................... 5
GROUNDING APPLIANCE ............................................................................................................................................... 5
LOCATING THE FIREPLACE ........................................................................................................................................... 5
WM-FM-26-3623-BG (WM-G19 26-1) .......................................................................................................................... 6
WM-FM-34-4423-BG (WM-G19 34-1) .......................................................................................................................... 7
WM-FM-48-5823-BG (WM-G19 48-1) .......................................................................................................................... 8
WM-FM-6 -7 23-BG (WM-G19 6 -1) ........................................................................................................................ ..9
WM-FM-72-8123-BG (WM-G19 72-1) ........................................................................................................................ 1
WM-FM-88-1 23-BG (WM-G19 88-1) ...................................................................................................................... 11
REMOVING FRONT GLASS ........................................................................................................................................... 12
INSTALLATION WALL-MOUNT .................................................................................................................................. 13
INSTALLATION BUILT-IN ............................................................................................................................................. 14
MANTEL CLEARANCE ................................................................................................................................................... 15
HARDWIRE INSTALLATION ........................................................................................................................................ 15
MEDIA OPTIONS .............................................................................................................................................................. 16
DECORATIVE MEDIA INSTALLATION ...................................................................................................................... 16
OPERATION ....................................................................................................................................................................... 17
MANUAL OPERATION ................................................................................................................................................... 17
REMOTE CONTROL OPERATION ................................................................................................................................ 18
WIFI OPERATION ............................................................................................................................................................. 21
REPLACEMENT PARTS .................................................................................................................................................. 24
EXPLODED VIEW ............................................................................................................................................................ 26
TROUBLE SHOOTING ..................................................................................................................................................... 27
SERVICE HISTORY .......................................................................................................................................................... 28
WARRANTY ...................................................................................................................................................................... 29

IMPORTANT INSTRUCTIONS
PLEASE RETA N TH S USER GU DE FOR FUTURE REFERENCE
When using electrical appliances, basic precautions should always be followed to reduce the
risk of fire, electric shock, and injury to persons, including the following:
1) Read all instructions before using this fireplace
2) The fireplace is hot when in use. To avoid burns, do not let bare skin touch hot surfaces.
Keep combustible material such as furniture, cushions, bedding, paper, clothes, curtains
at least 3 feet from the front of the unit
3) Extreme caution is necessary when any heater is used near children and whenever the
unit is left operating and unattended.
4) Do not operate a fireplace with a damaged cord or plug, or if the heater has
malfunctioned, the fireplace has drooped or damaged in any manner
5) Not all fireplaces are suitable for use in bathrooms or laundry facilities. Please consult
with individual product literature to confirm suitability
6) Do not run the cord under carpeting. Do not cover cord with throw rugs, runners or the
like. Arrange the cord away from traffic area and where it will not be tripped over
7) Do not modify this fireplace. Use it as described in the manual. Any other use not
recommended by the manufacture may cause fire, shock or injury to persons
8) Do not use this heater with programmer, timer, separate remote-control system or any
other device that switches the heater on automatically, since a fire risk exists if the heater
is covered or positioned incorrectly
9) Disconnect all power supply before cleaning, maintenance or relocation of the fireplace
10) Keep the heater clean. Do not allow any objects to enter any ventilation or exhaust
opening as this may cause electric shock, fire or damage to the heater
11) Do not immerse the cord, plug or any part of the appliance in water or any other liquid
12) n order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this
appliance must not be supplied through an external switching device
3
CAUTION: Procedures and techniques, which, if not carefully followed, will result in damage to
the equipment.
WARNIN : Procedures and techniques, which, if not carefully followed, will expose the user to
the risk of fire, serious injury, illness or death.
Consult with professional electrician and adhere to all code requirements for
installations in bathrooms
SAVE THESE INSTRUCTIONS

FCC CAUTIONS
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: 1) This device may not cause harmful interference, and 2) this device must
accept any interference received, including interference that may cause undesired
operation.
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.
4

UNPACKINGAND TESTINGAPPLIANCE
Carefullyremovethe appliancefromthe box.Priortoinstalling theappliance,testtomake
surethe applianceoperatesproperlybyplugging the powersupplycordintoaconveniently
located 120Voltgrounded outlet.
GROUNDINGAPPLIANCE
Thisapplianceisforuseon 120Volts.Thecordhasaplugasshownin(A).Anadapteras
shownin(C)isavailableforconnectingthree-bladegroundingtypeplugstotwo-slot
receptacles.The greengrounding lug extending fromthe adaptermustbe connected toa
permanentgroundsuchasaproperlygroundedoutletbox.The adaptershouldnot be used if
athree-slot grounded receptacleisavailable.
Todisconnectappliance, turncontrolstooff,then removeplugfromoutlet.
LOCATINGTHEFIREPLACE
Plan wheretolocateand framethe fireplace.Thiswillsavetimeand moneylaterwhen you
installthefireplace. Beforeinstallation considerthe following:
1.Wherethe fireplaceislocatedmustallowforwall and ceiling clearances(see
INSTALLATION-WALLMOUNT)
2.Consideralocation wherethefireplacescreenwill notbeexposed todirectsunlightfrom
windowsordoors.
3. A15 ampere,120 Volt, 60 Hzbranchcircuitwithproperground mustbe availableatthe
location.Preferablyadedicated branchcircuitshouldbe provided toavoidcircuit
breakerstotripof fusestoblow.
Screw
There are two screws on each side to fix the front glass.
Please see the figure right side.
TAKE OUT THIS SCREW ON EACH SIDE
before you take off the front glass.
NOTE: There may be trace f d r during the first few minutes f initial use. This is
harmless, n rmal and will never ccur again.
Note : Adaptor are NOT for use in Canada
5

Description Built-inorWall Mount Appliance
Voltage 120V AC60Hz
Watts 1500WMax
NOHEATER 25W
MOTOR HEATER 19W
ApplianceWidth 25 1/2”or64.9 cm
ApplianceHeight 19 7/8”or50.6 cm
ApplianceDepth 6 1/8”or15.5 cm
Gross Weight 52.8 lbsor24kg
PlugLocation Left side
Cord Length 707/8”or180 cm
RoughWallOpening
Size 27”201/2“or 68.60 cm 52 cm
BTU 5118
This appliancehasbeentestedin
accordancewiththeULStandard2021
forfixedandlocationdedicated
electricroomappliancesintheUnited
Statesand Canada.Ifyouneed
assistanceduringinstallation,please
contactyourlocal dealer.
NOTE:Thisappliancemustbe
electricallywiredandgroundedin
accordancewithlocalcodes.Inthe
absenceoflocalcodes,usethe
currentCSAC22.1CanadianElectrical
Codein CanadaortheANSI/NFPA70
NationalElectricalCodein theUnited
States.
WM-FM- 6-36 3-BG (WM-G1900 6-1)
6

Description Built-inorWall Mount Appliance
Voltage 120V AC60Hz
Watts 1500WMax
NOHEATER 25W
MOTOR HEATER 19W
ApplianceWidth 33 1/2”or85.2 cm
ApplianceHeight 19 7/8”or50.6 cm
ApplianceDepth 6 1/8”or15.5 cm
Gross Weight 63.1 lbsor28.7kg
PlugLocation Left side
Cord Length 707/8”or180 cm
RoughWallOpening
Size 35”201/2“or 88.9 cm 52 cm
BTU 5118
This appliancehasbeentestedin
accordancewith theULStandard2021
forfixedandlocationdedicatedelectric
roomappliancesintheUnitedStatesand
Canada.Ifyouneedassistanceduring
installation,pleasecontactyourlocal
dealer.
NOTE:Thisappliancemustbe
electricallywiredandgroundedin
accordancewith localcodes.Inthe
absenceoflocalcodes,usethecurrent
CSAC22.1 CanadianElectricalCodein
CanadaortheANSI/NFPA70National
Electrical CodeintheUnitedStates.
WM-FM-34-44 3-BG (WM-G190034-1)
7

Description Built-inorWall Mount Appliance
Voltage 120V AC60Hz
Watts 1500WMax
NOHEATER 25W
MOTOR HEATER 19W
ApplianceWidth 47 1/2”or120.6cm
ApplianceHeight 19 7/8”or50.6 cm
ApplianceDepth 6 1/8”or15.5 cm
Gross Weight 81 lbsor36.7kg
PlugLocation Left side
Cord Length 707/8”or180 cm
RoughWallOpening
Size 49”201/2“or 124.5 cm 52 cm
BTU 5118
This appliancehasbeentestedin
accordancewiththeULStandard2021for
fixedandlocationdedicatedelectricroom
appliancesintheUnitedStatesand Canada.
Ifyouneedassistanceduringinstallation,
pleasecontactyourlocaldealer.
NOTE:Thisappliancemustbeelectrically
wiredandgroundedinaccordancewith
localcodes.Intheabsenceoflocalcodes,
usethecurrent CSAC22.1Canadian
ElectricalCodeinCanadaortheANSI/NFPA
70 NationalElectricalCodeintheUnited
States.
WM-FM-48-58 3-BG (WM-G190048-1)

Description Built-inorWall Mount Appliance
Voltage 120V AC60Hz
Watts 1500WMax
NOHEATER 25W
MOTOR HEATER 19W
ApplianceWidth 59 1/4”or150.6cm
ApplianceHeight 19 7/8”or50.6 cm
ApplianceDepth 6 1/8”or15.5 cm
Gross Weight 97.2lbsor44.2kg
PlugLocation Left side
Cord Length 707/8”or180 cm
RoughWallOpening
Size 60 5/8”20 1/2“or 154 cm 52cm
BTU 5118
This appliancehasbeentestedin
accordancewiththeULStandard2021for
fixedandlocationdedicatedelectricroom
appliancesintheUnitedStatesand Canada.
Ifyouneedassistanceduringinstallation,
pleasecontactyourlocaldealer.
NOTE:Thisappliancemustbeelectrically
wiredandgroundedinaccordancewith
localcodes.Intheabsenceoflocalcodes,
usethecurrent CSAC22.1Canadian
ElectricalCodeinCanadaortheANSI/NFPA
70 NationalElectricalCodeintheUnited
States.
WM-FM-60-70 3-BG (WM-G190060-1)
9

Description Built-inorWall Mount Appliance
Voltage 120V AC60Hz
Watts 1500WMax
NOHEATER 25W
MOTOR HEATER 19W
ApplianceWidth 71”or180.4 cm
ApplianceHeight 19 7/8”or50.6 cm
ApplianceDepth 6 1/8”or15.5 cm
Gross Weight 113.3lbsor51.5kg
PlugLocation Left side
Cord Length 707/8”or180 cm
RoughWallOpening
Size 72 1/2”20 1/2“or 184 cm 52 cm
BTU 5118
This appliancehasbeentestedin
accordancewiththeULStandard2021for
fixedandlocationdedicatedelectricroom
appliancesintheUnitedStatesand
Canada.Ifyouneedassistanceduring
installation,pleasecontactyourlocal
dealer.
NOTE:Thisappliancemustbeelectrically
wiredand groundedinaccordancewith
localcodes.Intheabsenceoflocalcodes,
usethecurrent CSAC22.1Canadian
ElectricalCodeinCanadaorthe
ANSI/NFPA70NationalElectricalCodein
theUnited States.
WM-FM-7 -81 3-BG (WM-G19007 -1)
10

Description Built-inorWall Mount Appliance
Voltage 120V AC60Hz
Watts 1500WMax
NOHEATER 25W
MOTOR HEATER 19W
ApplianceWidth 88”or223.6 cm
ApplianceHeight 19 7/8”or50.6 cm
ApplianceDepth 6 1/8”or15.5 cm
Gross Weight 138.6lbsor63kg
PlugLocation Left side
Cord Length 707/8”or180 cm
RoughWallOpening
Size 89 1/2”20 1/2“or 227.3 cm 52 cm
BTU 5118
This appliancehasbeentestedin
accordancewiththeULStandard2021for
fixedandlocationdedicatedelectricroom
appliancesintheUnitedStatesand Canada.
Ifyouneedassistanceduringinstallation,
pleasecontactyourlocaldealer.
NOTE:Thisappliancemustbeelectrically
wiredandgroundedinaccordancewith
localcodes.Intheabsenceoflocalcodes,
usethecurrent CSAC22.1Canadian
ElectricalCodeinCanadaortheANSI/NFPA
70 NationalElectricalCodeintheUnited
States.
WM-FM-88-100 3-BG (WM-G190088-1)
11

REMOVING FRONTGLASS
ModelsWM-FM-26-3623-BG ,WM-FM-36-4423-BG , WM-FM-48-5823-BG and WM-FM-60
-7023-BGeach have2screwsthat secure the front glass in place.Models WM-FM-72-
8123-BG and WM-FM-88-10023-BG havefourscrews secure the front glass in place.
Two people are required for the installation process.
1. The back-lighting LED is located on the back of the glass. Before removing the glass
you must unplug the back-lighting from the unit. This plug is located at the bottom left
hand side behind the front of the glass.
2. The screws are located on the sides of the unit. Once located, unscrew the two or four screws.
You can then lift the front glass from the 4 shoulder posts on the sides of the unit and remove
the glass.
3. To replace the glass, lift onto the 4 shoulder posts. For a Wall Mount installation,replace the
two or four screws to secure the glass. For Flush Mount installs it is not possible to replace
the screws.
Location of the back-lighting plug Unplug the back-lighting
Screw locations on uint Lift glass from shoulder posts
12

INSTALLATION -WALL MOUNT
1. Selectalocationthatis notproneto
moistureandis locatedatleast0.91mor3
feetawayfromcombustiblematerialssuch
ascurtainsordrapes, furniture,bedding,
paper,etc.
2. ReferringtoFig.1belowselectasuitable
positioninwhichtomounttheheater
horizontally –useaspiritleveltoachieve
this.
3. Checkthewall toensurethere is nowiring,
pipewiresetcintheareatobedrilled.Drill
8ormore holes(8mmdiameter&40mm
depth)usingasuitablesizedrill andputthe
wall plugs into theholes.
4. Takeoutthehangerfromthefireplaceby
unscrewthescrew.Referringto Fig.2.
5. ReferringtoFig.3，fixthehangertothe
wall.
6. Referringto Fig.4，avoid fireplaceto move,
usescrewfixfireplaceto wall.
Warning!
Besurethattheboltshavebeenfixed
firmlyenoughtowithstand theweight
Fig. 1
Fig. 2
Fig.3
Fig. 4
NOTE: Due to the many different materials used on different walls, it is highly recommended
that you consult your local builder before you install this appliance.
13

INSTALLATION-BUILT-IN
1. Selectalocationthatis notproneto
moisture and is locatedatleast0.91mor3
feetawayfromcombustiblematerialssuch
ascurtainsordrapes, furniture,bedding,
paper,etc.
2. Markthedesiredlocationonthefloorand
store applianceinasafe,dryand dustfree
location.
3. Prepare awallwithaframedopeningto
accommodatethesizeofyourunit.Leaveat
least1/4”(6mm)aroundtheedgeofthe
appliance.Anynewwiringmustbedonein
compliancewithlocal and national codes
and otherapplicableregulations.
Note:Fireplacemuststickout ofthewall a
minimumof1/2”or1.5 cm.
Priorto installingtheappliance,testto make
suretheapplianceoperatesproperlyby
pluggingthepowersupplycordintoa
convenientlylocated120Volt grounded
outlet.
Theroughwall openingsizeofthefireplace:
W(“) D(“) H(“)
WM-FM-26-3623-BG 27 6 1/2 20 1/2
WM-FM-34-4423-BG 35 6 1/2 20 1/2
WM-FM-48-5823-BG 49 6 1/2 20 1/2
WM-FM-60-7023-BG 60 5/8 6 1/2 20 1/2
WM-FM-72-8123-BG 721/2 6 1/2 20 1/2
WM-FM-88-10023-BG 89 1/2 6 1/2 20 1/2
1. Takethe frontglass offfromthe unit.Putthe
bracketson the bothsidesand top ofthe fireplace
asshown blew.
2. Lift fireplaceand insertintoopening.
3. Makesurethatthepowersupplyportisnot
behindthewall.
4. Levelthefireplace.
5. Drivemountingscrewsintothemounting
bracketsontheunit and thewall studs.
6 Replace glass and plug in back-lighting.LED. See page 11.
NOTE: Due to the many different materials used on different walls, it is highly recommended
that you consult your local builder before you install this appliance.
14

Turnofftheappliancecompletelyand let coolbeforeservicing.Onlyaqualifiedserviceperson
should serviceandrepairthiselectricappliance.
If itis necessarytohardwirethisappliance,aqualifiedelectricianmustremovethecordconnection,
and wiretheappliancedirectlyto thehouseholdwiring.
This appliancemustbeelectricallyconnectedandgroundedinaccordancewith localcodes,ifhard
wired.Intheabsenceoflocal codes, usethecurrentCSA C22.1CANADIANELECTRICAL CODEin
CanadaorthecurrentANSI/NFPA70 NATIONAL ELECTRICAL CODEintheUnited States.
1. Removethecoverplatefromtheleftsideoftheappliancebyremovingthetwoscrews, as
shownbelow.Unscrewand removepowercord.
2. Attachthewiringtothejunctionblock.Pleasemakesurethelivewiregoesintothe “L”,the
neutral wireinto “N”and thegroundwireinto “G”.
3. Puttheplatebackandscrew back.
HARDWARE INSTALLATION
MANTEL CLEARANCE
The clearance to the mantel should be 1” minimum when a mantel is applied (Measurement
is taken from glass front).
1"
Floor
Fireplace
Mantel
Wall
Fireplace
(Combustible facing allowed)
15

The fireplace shipped with Birch log set, amber glass and Vermiculite. Consumers may
purchase optional decorative media if they choose. ee dealer for more details.
MEDIA OPTIONS
DECORATIVE MEDIA INSTALLATION
1. Unplug the unit from the power.
2. Unscrew 2 screws on both left and right side of the unit to take off the front glass panel.
Three people are recommended during this process. Hold the front glass panel with care.
3. Pour the fire glass media into the tray. Feel free to use any combination of fire glass media
that you find most appealing. Put back the front glass after you finish install the fire glass.
Birch log set Amber glass Vemiculite
16

17
OPERATION
Plug the fireplace into a 15 Amp wall socket.
MANUAL OPERATION
Plug the fireplace into a 15 Amp wall socket.
The Fireplace operates by using either the touch panel located on the upper left hand corner
or by remote control.
1.
2.
Press to turn on and off the fireplace.
Press to adjust the flame brightness. There are 6 brightness levels（L6-L1） and
an off(OF) position. Each time the flame button is pressed, the brightness of the flame
decrease.
press the flame button for 10 seconds, the timing indicator light on and will rapidly
blinks, at this time, You can use the TuyaSmart APP to connect to the fireplace.
3. Press to adjust the ember Bed /Moodlight brightness. There are 11 brightness.
levels (d11-d2), dynamic condition(d1) ,and the OFF(OF) setting you can cycle through.
4. Press to set the turn-off time, 30min-1h-2h-3h-4h-5h-6h-7h-8h-t0. The indicator light
the current timing. If the timing in off position, the second press will show 30. Multiple times
to set operating duration to OF, 30 min, 1h, 2h, 3h, 4h, 5h, 6h, 7h, 8h.
5. Press or the first time to display the current setting temperature，press the button
again to clear the current temperature. If the heater in off position, the second press will
show 22℃(72℉).Multiple times to set ambient temperatures at 22℃( 72℉) , 23℃
(74℉) ,24℃( 76℉) , 25℃( 78℉) , 26℃( 80℉) , 27℃( 82℉) , 28℃( 84℉) ,15℃( 52℉) ,
16℃( 54℉) , 17℃( 56℉) ,18℃( 58℉) , 19℃( 60℉) , 20℃( 62℉) , 21℃( 64℉) .
Temperature unit convert functionZ When the heater is on, press and hold the“ ”
Button for 5 seconds, current temperature unit display will convert to another temperature
unit.

1
REMOTE CONTROL OPERATION
For remote to function make sure the fireplace is plugged in and the remote has batteries.
Important: When operating the remote make sure you point the remote to the center of the
fireplace. Each time you press the button, the buzzer inside the unit will beep once. It takes
some time for the receiver to respond to the transmitter. Do not PRESS the buttons more
than once within two seconds for correct operation.
Set the current time of the remote control
Press the to activate the remote control and press to set the time and date.
When one of the “Sun” “Mon” “ Tue” “Wed” “Thu” “Fri” “Sat” is flashing, press or to
set the day of the week, press to confirm day of the week and then enter hour setting.
Press or to set the hour, press to confirm the hour and then enter minute
setting. Press or to set the minute and press to confirm the minute and
finish time setting.
Press this Power button to turn on and off the fireplace.
Press this Timer button to set the time to turn off the fireplace.
The available settings range from 3 minutes to 8 hours. As
shown in the following: :3 - 1: - 1:3 - 2: - 2:3 - 3: -
3:3 - 4: - 4:3 - 5: - 5:3 - 6: - 6:3 - 7: - 7:3 - 8: .
Once you have set the timer, the icon will be displayed
on the LCD screen of the remote control. Press this button
again to cancel the timer setting and the icon disappears.
Each time the Heater Button is pressed, the power of the
heater will change. As shown the following: H1- H2-
AUTO（22℃）- OFF（no display）
H1 means the firepalce on Low Heat/750W.
H2 means the fireplace on High Heat/1500W.

19
Press this button to adjust the speed of the flame. There are 3 options: High-
Medium- Low.
The Ember bed /moodlight Button turn the ember bed or moodlight on and off.When
in on position,the display screen of the remote control shows AD1.,when the
number“1”flash,you can set the color with or keys. There are 10 different
colors (AD1-10) and dynamic condition(AD11) to choose from.
Press the Flame button to turn on and off the Flame. When in ON position, the LCD
screen of the remote control shows 6 6 6. Press or or to change
the brightness of each color flame.
7 Day Timer Function
Press once, 7 days from Monday to Sunday will display on the LCD screen of
the remote control, press within 5 seconds to enter 7 day timer function. When
“Sun” flashes, press or to select the day that you want to set, press to
confirm your setting. Then “ON” will be display on the LCD screen of the remote
control, at the same time, digital of time hour flashes, press or to set the
time to turn the fireplace on. After setting the startup time, “OFF” will be displayed on
the LCD screen and press or to set the shutdown time. When the
shutdown time’s set, “AUTO” will be displayed on the LCD screen of the remote
control and the digital of temperature flashes. At this time, you can set the
temperature by or . Now, you have finished setting of this function.
AUTO means fireplace can automatically adjust to the temperature you set. When in
AUTO, you can set the desired temperature with or keys. You can switch
temperature between Celsius and Fahrenheit with or keys.When it is on Auto
mode,fireplace operate at 1500W.

20
When the 7 day timer’s set, the icon will be displayed on the LCD screen of the
remote control. Press again to cancel the 7 da
will disappears.
NOTE: If the 7 day timing and the general timing are set at the same time, the
system will respond to an earlier shutdown time.
Press Refer button to check the settings of 7 day timer. Press or to see the
settings of the day of the week and or the settings of the startup and
shutdown time.
y timer and the icon