American Standard Deck Mount Tub Fillers T990.5XX User manual

COLONY DIVERTER & PERSONAL
SHOWER TRIM KIT
DECK MOUNT
TUB FILLERS
Installation
Instructions
M968762
T990.5XX
Thank you for selecting American-Standard...the benchmark
of fine quality for over 100 years.
To ensure that your installation proceeds smoothly--please
read these instructions carefully before you begin. Certified to comply with ANSI A112.18.1
U.S. Patent No. D403,750
FINISHED
DECK
HANDLE
STEM
SLEEVE
ESCUTCHEON
SEAL
VALVE
ESCUTCHEON
1INSTALL DIVERTER VALVE TRIM
REMOVE THE DIVERTER GUARD.
Place the ESCUTCHEON SEAL over the DIVERTER BODY.
Thread the VALVE ESCUTCHEON into the DIVERTER BODY.
Align the HANDLE STEM with the SLEEVE as necessary.
Thread the VALVE ESCUTCHEON into the BODY until the
ESCUTCHEON contacts the finished deck.
DIVERTER
GUARD
M961460-0020A
VALVE
ESCUTCHEON
M916803-0070A
METAL LEVER
HANDLE
M918504-0070A
ADAPTER SCREW
M918075-0070A
HANDLE SCREW
M918021-0070A
ADAPTER
M961463-0020A
HAND SHOWER
028667-0020A
HAND SHOWER
HOSE AND SEALS
(AVAILABLE WITH R890)
M961464-0020A
HAND SHOWER
HOLDER
033760-0070A
HAND SHOWER
SEAL KIT

Product names listed herein are trademarks of American Standard Inc.
©American Standard Inc. 2001
2
3
HOTLINE FOR HELP
For toll-free information and answers to your questions, call:
1 [phone]
Weekdays 8:00 a.m. to 7:00 p.m. Eastern Time
Unscrew the HOLDER from the SHOWER ESCUTCHEON. Slip the
SHOWER HOSE through the HOLDER and the SHOWER ESCUTCHEON.
Insert a SEAL WASHER into the SHOWER HOSE CONNECTOR.
Pull out the SLEEVE GUARD and HOSE. Unthread the SLEEVE GUARD
from the HOSE END connection. Be careful not to allow the HOSE to
fall back through the SLEEVE.
Thread the SHOWER HOSE onto the HOSE END connection and tighten
securely.
IN CANADA 1-800-387-0369 (TORONTO 1-905-306-1093)
SHOWER HOSE
HOSE
HOSE END
SHOWER HOSE
SET SCREW
RUBBER RING
SHOWER ESCUTCHEON
SHOWER
ESCUTCHEON
HOLDER
SEAL WASHER
S
EAL WA
S
HE
R
SLEEVE
GUARD
SLEEVE
SEALANT
HAND SHOWER
HAND SHOWER
HOLDER
SEAL WASHER
INSTALL HANDLE TRIM
INSTALL HAND SHOWER
Turn HANDLE STEM fully clockwise (Tub Filler position).
Place the HANDLE ADAPTER on the HANDLE STEM.
Install the ADAPTER SCREW and tighten securely.
Position LEVER HANDLE and place on ADAPTER. Install
the HANDLE SCREW and tighten securely.
HANDLE
STEM
M968762
Apply a sealant around the HOSE HOLE.
Thread the SHOWER ESCUTCHEON into the SLEEVE until the ESCUTCHEON
contacts the finished deck.
Loosen the SET SCREW in the SHOWER ESCUTCHEON and rotate the
ESCUTCHEON towards the center of the tub. Retighten the SET SCREW.
Thread the HOLDER into the SHOWER ESCUTCHEON.
Insert a SEAL WASHER into the SHOWER HOSE
connector and connect the HAND SHOWER.
Place the HAND SHOWER into the HOLDER.
SLEEVE
METAL
LEVER
HANDLE
ADAPTER
SCREW
HANDLE
SCREW
ADAPTER