AMP Lighting Wider NovellePro APL-3026-4-B-BZ Operating and safety instructions

INSTALLATION & MAINTENANCE GUIDE
Help Hotline:
1-813-978-3900 • Mon-Fri 9am-6pm (EST)
www.amplighting.com
AMP®Low Voltage Landscape Lighting
AMP® Wider NovellePro
APL-3026-4-B-BZ

AMP®Wider Novelle Pro
APL-3026-4-B-BZ
INSTALLATION & MAINTENANCE GUIDE
www.amplighting.com
–2–
Important Safety Instructions: Read Before Installation
!
Important Safety Instructions
!
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, OR INJURY TO PERSONS
Lighted lamp is HOT!
WARNING – To reduce the risk of FIRE OR INJURY TO PERSONS.
1. Turn off/unplug and allow to cool before replacing lamp.
2. Lamp gets HOT quickly! Contact only switch/plug when turning on.
3. Do not touch the hot lens, guard or enclosure.
4. Keep lamp away from materials that may burn.
5. Do not touch lamp at any time. Use a soft cloth. Oil from skin may
damage lamp.
6. Do not operate the luminaire tting with a missing or damaged shield.
SAVE THESE INSTRUCTIONS
This luminaire is intended for installation in accordance with local codes
and the National Electric Code (NEC). Failure to adhere to these codes and
instructions may result in serious injury, property damage and void the
warranty.
These instructions do not intend to cover all variations in installation,
operation maintenance or mounting situations.
1. Make sure that the power is turned OFF before installing or servicing
this luminaire.
2. Warning: risk of electrical shock. Install all luminaires 10 feet (3.05M)
or more from pool, spa or fountain.
3. This luminaire is intended to be used only with a power supply
(transformer) rated maximum of 300 watts (25 AMPS) at 15 volts.
4. Wiring connections must be made with UL listed wire connectors that
are suitable for outdoor use.
5. Position the low voltage wire and wire connector so that it is located
within 6 inches (15.2 cm) from a building structure, a luminaire or
tting.
6. The main low voltage cable is intended for shallow burial - less than 6
inches (152 mm).

[email protected] • 813.978.3900
Product Dimensions
–3–
Package Contents
A. (1) Fixture Body B. (1) Stake
Parts Required (sold separately)
A. (1) G4 Bi-Pin
22”
6”2”
1”

INSTALLATION & MAINTENANCE GUIDE
–4–
www.amplighting.com
–4–
2
1
AMP®Wider NovellePro
APL-3026-4-B-BZ
Remove Lens
Remove the lens from the xture
by loosening the screws.
Fixture
Screw
Lens
Install G4 Bulb
Insert the Bi-Pin with correct
wattage and type marked on
xture label and push into
place.
CAUTION: Do not exceed
maximum wattage marked on
luminaire label.
NOTE: DO NOT touch bulb with
bare hands. Use soft cloth to
handle bulb.
Socket
Bi- Pin

[email protected] • 813.978.3900
–5–
INSTALLATION & MAINTENANCE GUIDE
3
4
AMP®Wider NovellePro
APL-3026-4-B-BZ
Install Lens
Place the lens back onto the
xture and secure with the
previously removed screws.
Tighten until snug.
Fixture
Screw
Lens
Install Stake
Determine the desired location
for mounting the stake mount.
Hammer the stake into the
ground until ange of stake
is ush to grade. To avoid
damage to the stake, place a
board on top of the stake while
hammering.
Note: If the ground is hard and
the stake is difcult to install,
make a crosscut in the ground
using a at shovel.
Board
Ground
Soil
Stake

INSTALLATION & MAINTENANCE GUIDE
–6–
www.amplighting.com
–6–
5
AMP®Wider NovellePro
APL-3026-4-B-BZ
Install Fixture to Stake
Pass the xture wire through
the center hole of the stake.
Thread the xture on to the
stake and hand tighten until
snug.
Fixture
Fixture Wire
6
Wire Connections
Strip both leads from xture body. Using two wire connectors (sold
separately), connect the leads from the xture body to main supply
cable leads.
Pigtail
Main Supply Cable
Supply Wire from
Fixture Body
Wire Connectors

–6––6–
[email protected] • 813.978.3900
–7–
Install/Replace G4 Bulb
Please reverse Step 2 - Step 3 to expose the bi-pin and replace it with the
correct wattage and type marked on the xture label. And then reinstall
the lens.
IMPORTANT: Bi-Pin must be protected from moisture and dust at all times.
Always reinstall the lens when removed.

IS-APL-3026-4-B-BZ-ver1.pdf
Specications and product details subject to change without notice.
© Copyright 2020, AMP®Lighting, Lutz FL USA 33549 • All rights reserved.
[email protected] • 813.978.3900
Help Hotline:
1-813-978-3900 • Mon-Fri 9am-6pm (EST)
www.amplighting.com