Amphenol PI539 User manual

ENTERTAINMENT INTERCONNECT CATALOGUE - Amphenol Australia Pty Ltd Telephone [phone] Fax [phone] www.amphenolaudio.com
7
AX SERIES XLR CABLE CONNECTORS
PI539
ASSEMBLY
INSTRUCTIONS
AX SERIES FEMALE XLR
CABLE CONNECTOR
Slide the nut (Backshell) onto the cable
Install the cable clamp, flush to the insert
making sure to align the top slot with the spring.
Then push the insert & cable clamp together into
the shell.
Thread the nut (Backshell) onto the shell (Torque
0.8Nm - 1.2Nm) to activate the cable clamp and
close the connector assembly.
Strip the cable
Push back the insert only enough to expose the
solder buckets. It is not necessary to remove the
insert. Solder the wires to the contacts.
1
2
4
5
3
22
4
Rev 1 - 03/2009

ENTERTAINMENT INTERCONNECT CATALOGUE - Amphenol Australia Pty Ltd Telephone [phone] Fax [phone] www.amphenolaudio.com
8
AX SERIES XLR CABLE CONNECTORS
Rev 1 - 03/2009
PI538
ASSEMBLY
INSTRUCTIONS
AX SERIES MALE XLR
CABLE CONNECTOR
Slide the nut (Backshell) onto the cable
Install the cable clamp flush to the insert making
sure to align the slot with the ground contact.
Align the key of the insert with the keyway on
the shell then push the pin insert & cable clamp
together in the shell.
Solder the wires to the contacts.
1
2 6
4
5
3
Strip the cable Thread the nut (Backshell) onto the shell (Torque
0.8Nm - 1.2Nm) to activate the cable clamp and
close the connector assembly.
22
4