AMTI Products Slice 123 User manual
1.CONNECT POWER CABLE.
2.TURN ON SWITCH LOCATED IN BACK.
3. MACHINE WILL SAY “Ready”.
4. ADJUST TOP ROLLER GUIDE WITH MAETRAIL
INSERTED. MATERIAL MUST BE CENTERED.
5. TO LOAD MATERIAL, PRESS “LOAD” BUTTON.
MATERIAL WILL INDEX AND COMPLETE ONE CUT
CYCLE.
6. TO RUN MATERIAL “RUN” BUTTON.
123 QUICK START GUIDE
*SAFETY: ALWAYS TURN OFF POWER BEFORE INVESTIGATING JAMS OR INTERNAL ISSUES.
NEVER PLACE FINGERS, HANDS, OR TOOLS INTO THE MACHINE WHILE IT IS PLUGGED IN.
*SEE MANUAL FOR ALL SAFETY INFORAMTION*
www.amtiproducts.com
847.588.7090
7. LCD WILL SHOW “LENGTH=”, USING THE KEYPAD,
ENTER LENGTH.
8. THEN PRESS THE “ENTER” BUTTON
9. LCD WILL SHOW “Count=”. ENTER RUN QUANTITY
AND PRESS “ENTER” ON THE KEYPAD.
10. TO RUN, PRESS THE “RUN” KEY. MATERIAL
WILL THEN BEGIN DESIRED MEASURING AND
CUTTING PROCESS.
Other manuals for Slice 123
1
Table of contents
Other AMTI Products Cutter manuals
