AND UC-352BLE User manual

E-1
Instruction Manual
Startup guide............................................E-2
Safety precautions...................................E-3
Wireless communication function.............E-4
Accessories..............................................E-4
Parts names.............................................E-5
Installing (or replacing the batteries)........E-6
Connecting to a mobile device (Pairing)...E-7
Setting the units........................................E-8
Measuring your weight.............................E-9
Other functions.......................................E-10
Specications......................................... E-12
Before requesting service.......................E-13
Maintaining the scale..............................E-13
UC-352BLE
DELUXE CONNECTED
WEIGHT SCALE
Congratulations on purchasing a state-of-the-art A&D medical connected scale,
one of the most advanced health scales available today. Designed for ease of
use and accuracy, this device will facilitate your daily weight management regi-
men. We recommend that you read through this manual carefully before using
the device for the rst time.
SMART

E-2
Start up Guide
Get Started
Measuring
SMART
SMART
lb
SMART
Install the batteries
Pair with a receiver
Setting the unit
Step on the scale
Conrm that “StEP” and “oFF” are
alternately displayed
Step off the scale
Conrm your weight
Data is transmitted to your mobile device
Data is stored in the scale if there is no receiver

E-3
Safety Precautions
The following items contain information to prevent the risk of harm or injury
to yourself or other people. Please read these items carefully and be sure to
use this product correctly.
Danger
This symbol indicates "an immediate danger which could result
in death or serious injury".
Warning
This symbol indicates "the possibility of death or serious injury".
Caution
This symbol indicates "the possibility of physical injury or
damage to property".
Precautions for use
Warning
Do not rely on self-diagnosis when attempting weight loss or therapeutic exercise.
Follow the instructions of a physician or specialist.
Do not step on the edges of the scale or jump on the scale.
It may result in a fall, causing injury. The impact may also cause damage to the scale.
Do not use the scale on an uneven surface.
It may damage the scale. Also, the scale cannot measure accurately.
Do not use the scale on a slippery surface, or step on the scale with wet feet.
It may result in slipping and injury. Also, the scale cannot measure accurately.
Caution
Do not place the scale where it is exposed to excess water or humidity such as a bathroom, where it is exposed to
direct sunlight, where it is exposed directly to the air outlet of an air conditioning unit, or near fire.
It may cause the scale to malfunction.
This scale should only be used for weighing body weight.
This scale is a precision measuring device. Do not drop the scale, or expose it to vibration or powerful shocks.
Do not disassemble, repair or modify the scale.
It may cause malfunction or injury.
Persons with disabilities should be assisted by a caregiver when using this scale.
Failure to do so may result in a fall, causing injury.
When installing the batteries, be sure that the + (positive) and - (negative) terminals are correct.
Installing incorrectly may cause overheating, battery fluid leaks or rupturing of the batteries, resulting in damage to
the scale or injury.
This scale is designed for personal use.
Store this scale out of the reach of small children.
Do not store this scale vertically. If for any reason this scale is stored vertically, be sure not to let the scale fall.
Do not place any items on this scale during storage.
If use of this scale is shared with a person who has an infectious disease such as a skin disease on the feet, etc.,
clean the scale before use.
(For details on cleaning the scale, see "Maintaining the Scale (P.13)".)
To accurately measure your weight, use the scale on a flat, hard floor. Do not use on a carpet or other soft surface

E-4
This scale uses Bluetooth®wireless connectivity to communicate with a receiver
device. At the end of measurement, the measurement data is sent from this scale
to the receiver device.
Bluetooth® is communication technology that enables devices to communicate
wirelessly. The Bluetooth®word mark and logos are registered trademarks owned
by Bluetooth SIG, Inc. and any use of such marks by A&D is under license. Other
trademarks and trade names are those of their respective owners.
Wireless Communication Function
Bluetooth
®
Precautions for Wireless Functions
Warning
Do not use in places where wireless communication is prohibited, such as on airplanes or in
hospitals.
This scale may have an adverse effect on electronic devices or medical electrical equipment.
Caution
If the communication function of this scale is used near a wireless device that communicates in the 2.4 GHz range,
the processing speed of both devices may decrease. Do not use near a microwave oven where a magnetic field,
static electricity or radio wave interference may occur. (The signal may not reach due to environmental reasons.)
Accessories
If any of the following accessories are missing or damaged, contact the product
vendor or an A&D Sales Branch.
- 1 x Instruction Manual
- 4 x Alkaline Batteries
* A&D cannot accept any reponsibility for any losses incurred such as operating
malfunctions or loss of data that may occur through the use of this scale.
* This scale is not guaranteed to connect to all Bluetooth®compatible devices.

E-5
Parts names
Scale
Battery compartment
Feet
SMART
Display Set switch
Display Section
Display Symbols
Battery indicator
Stable Symbol
Communication
Symbol
Unit
Bluetooth®
Display Section
Symbol Name Description
Ready/Stable symbol This symbol is displayed when the measurement
display is stable.
Battery indicator
Low battery indicator
The normal battery power indicator with charge
remaining.
If this symbol is displayed, replace all four batteries
with new ones.
Bluetooth®Communication Symbol

E-6
Installing (or replacing) the batteries
1. Open the battery compartment cover on the
underside of the scale.
2. Install four new AAA size alkaline
batteries with the positive (+) and
negative (-) terminals properly aligned
with the corresponding symbols in the
battery compartment.
3. Close the battery compartment cover.
Caution
Install each battery with the positive (+) and negative (-) terminals properly aligned with the
corresponding symbols in the battery compartment.
Improper installation of the batteries may cause battery leakage.
Replace all four batteries with new ones, when the symbol is displayed.
Do not mix new and used batteries. It may cause damage tothe scale or shorten the battery life.
Be sure to use AAA size alkaline batteries. Do not use any other type of battery.
Never use rechargeable batteries with this scale.
The battery life is dependant upon the environmental temperature, battery type and usage.
The batteries provided with the device are for testing the scale performance and may have a
limited life.
Remove the batteries from the battery compartment, when the scale is not to be used for a long
time. Storing the scale with the batteries installed may result in battery fluid leaking from the
batteries, causing damage tothe scale. The supplied batteries are for checking operation of the
scale and may have a short lifespan.
The scale has an "Automatic power-off" function.
After the measurement results are displayed for 60 seconds, the scale is automatically turned off.
Automatic Power off Function

E-7
Connecting to a mobile device (Pairing)
This scale needs to be registered with a receiver in order to use Bluetooth®
communication with the receiver. The process of registering this scale with a
receiver is known as pairing. When pairing is completed, measurement data
from this scale is automatically sent to the paired device each time a
measurement is made when the receiver is in the state in which it can receive
transmissions.
Consult the receiver instruction manual and set it to enable pairing. If the
receiver has a “pairing wizard”, use the wizard to complete pairing. Place the
receiver and this scale as close as possible to carry out pairing.
1. Install four AAA size alkaline batteries into this scale.
• For details, see “Installing (or Replacing) the Batteries”.
2. Conrm that the scale is turned off, and
press and hold the set switch.
•When the set switch is continuously pressed,
“Pr” is displayed.
3. Release the set switch when “Pr” is
displayed.
• “ ” ashes.
•This scale is discoverable by the receiver.
•Pairing can be skipped press the set switch when
“Pr” is displayed.
4. Start pairing on the receiver.
• Follow the pairing instructions for the receiver to search
for, select and pair with this scale.
5. Conrm that “End” is displayed.
Once paired, changing batteries should not require
re-pairing.
Beep
Beep beep

E-8
Cautions for Pairing
Turn the power of other Bluetooth devices off when performing pairing.
If measurement data cannot be received, try pairing again.
After pairing is complete, all communications are done automaticallyif the receiver is in the
receivable state.
In the unlikely event that this scale causes radio wave interference to another wireless station,
either change the location where the scale is used or stop using the scale immediately.
®
Setting the Units
1. Conrm that the scale is turned off, and
press the set switch.
2. Press the set switch to select the unit
that you want to set.
•The unit changes each time the set switch is
pressed.
•Wait for 3 seconds after setting the unit.
3. Conrm that “End” is displayed.
•The settings are saved.
•After three seconds of non-operation, the scale
conrms the selected unit with two beeps, displays
“End ” and automatically turns off.
4. If you to wish to delete any readings stored in
memory press the set switch. Changing the units
format will delete any stored readings on the scale.
Note: to see readings stored in memory they must
be transferred to your mobile device and displayed
in the A&D Connect app.
Beep
selected unit with two beeps, displays “End ” and automatically
Beep beep
kg
lb
lb

E-9
Measuring your Weight
Step On Weighing
1. Conrm that the scale is turned off, and
step on the scale gently.
• Measurement starts when you step on the
scale.
• A progress bar is displayed during mea-
surement. Stand up straight and remain as
still as possible during measurement.
2. Step off the scale when “StEP” and “oFF”
are alternately displayed with three beeps.
•If you do not step off, the scale beeps
every two seconds.
•The scale turns off automatically after
2 minutes.
•All display segments are indicated when
you step off the scale.
•Do not touch the scale while all display
segments are indicated. It may cause
misreading.
3. Conrm the measurement results.
•The scale turns off automatically 60
seconds after the measurement results are
displayed.
•Data is automatically sent to the receiver if
the receiver is in the receivable state.
•If the scale is not paired with a receiver,
the data is stored in the scale memory. (See
“Transmitting Temporarily Stored Data”.)
•Data stored in the scale memory cannot
be viewed on this scale.
•You can also shut the power off by
pressing the set switch.
• Most recent readings will be shown on the
screen.
SMART
SMART
the scale is
Measurement starts when you step
Beep
Beep beep beep
k
+
-lb
g
lb

E-10
Other Functions
Transmitting Temporarily Stored Data
If measurement data cannot be sent to a receiver, this scale can temporarily
store data of a maximum of 90 measurements in the built-in memory. When
the scale is able to transmit to a receiver, all of the data is transmitted. If the
amount of data temporarily stored exceeds 90 measurements, the oldest data
is deleted and replaced with new data.
•Stored data cannot be viewed on this scale.
•The amount of data that can be temporarily stored may vary with the
application.
Bluetooth®Transmission
This product is equipped with a Bluetooth® wireless function and can
connect to the following Bluetooth® devices.
• iPhone, iPad, iPod ( iPhone 4S or later )
• Applications and devices that are compatible with Bluetooth 4.0
Each device needs an application to receive data.
For connection methods, refer to the manual for each device.
To connect with your mobile device - download and install the
“A&D Connect” app:
Follow the instructions in the app to connect.

E-11
Ensuring a good connection
•Ensure the space between this scale and the receiver is unobstructed. The
communication distance may be shortened due to the building construction or
other obstructions. In particular, communication may not be possible through
reinforced concrete walls, etc.
•Do not use the Bluetooth®connection near a wireless LAN or other wireless
equipment, near devices that emit electro-magnetic waves such as micro-
wave ovens, locations that have a large number of obstructions, or other poor
environments for radio waves. It may cause the connection to be frequently
interrupted, communication speeds to drop substantially, and errors to occur.
•When used near an IEEE802.11g/b/n wireless LAN device, the devices
cause mutual radio wave interference, and the communication speed may drop
or connection may be impossible. In this situation, turn the power of the device
that you are not using off, or change the location where it is used.
•If the scale does not communicate properly when used near a wireless de-
vice or broadcast station, change the location where it is used.
Caution
The communication distance between this scale and the receiver is approximately 32 feet or 10
meters.
This distance may become shorter due tothe surrounding environment; therefore check that the
distance is close enough for data to be transmitted after the measurement.
Time Settings
This scale has a built-in clock. The date and time of measurement are included in
the measurement data. The clock is synced with the clock in the mobile device.
There is no need to set the clock on the scale.

E-12
Specications
Model
UC-352BLE
Maximum capacity
Minimum display 0.2 lb units from 0 to 220.0 lb
0.5 lb units from 220.0 to
0.1 kg units from 0 to 100.0 kg
0.2 kg units from 100.0 to
450lb/200kg
Wireless
communication
VZ(MURATA Manufacturing Co.Ltd.) Bluetooth Ver.4.0LE
Setting Items
Units: lb or kg
Power source
Four AAA size alkaline batteries
Battery life Approx. 1 year (two measurements per day when alkaline batteries are used)
Dimensions
Weight
Accessories
1 Instruction manual, 4 AAA Alkaline batteries
11.8"(300mm) (W) x 11.8"(300mm) (D) x 1.2"(31 mm) (H)
4.7 lb (2.1kg)(including batteries)
450 lb/200 kg
450 lb
200 kg
FCC CAUTION
Changes or modications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
This transmitter must not be co-located or operated in conjunction with any
other antenna or transmitter.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment and meets the FCC radio frequency (RF) Exposure
Guidelines in Supplement C to OET65.
This equipment complies with IC radiation exposure limits set forth for an
uncontrolled environment and meets RSS-102 of the IC radio frequency
(RF) Exposure rules. This equipment has very low levels of RF energy that it
deemed to comply without maximum permissive exposure evaluation (MPE).
But it is desirable that it should be installed and operated keeping the radiator
at least 20 cm or more away from a person’s body (excluding extremities:
hands, wrists, feet and ankles).
NOTE: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interfer-
ence in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation.

E-13
Before Requesting Service
Maintaining the Scale
• If the scale becomes dirty, soak a cloth in water or mild detergent, wring the
cloth out thoroughly and then wipe the scale clean.
• After wiping away the dirt with the damp cloth, dry the scale using a soft, dry
cloth.
•Never use alcohol, benzene, thinner or other harsh chemicals to clean the
scale.
•Remove the batteries from the battery compartment, when the scale is not
going to be used for a long time.
Symptoms
Corrective Action
“E” is displayed
Exceedsthe maximum capacity ( ).
450lb/200kg
“E -0” is displayed
Exceedsthe maximum capacity ( ).
“Err” is displayed Exceedsthe maximum capacity ( ).
“E-10” is displayed
Communication error.
Remove and reinstall the batteries.
“E-11” is displayed
is displayed Remove and reinstall the batteries. Or replace all four batteries with new
AAAsize alkaline batteries.
Nothing is displayed when
the setting switch is
pressed
The measurement
results are greatly
different from the
expected values.
Place the scale on a solid level surface.
Remove anyforeign objects that might be touching the bottom of the
scale.
450lb/200kg
450lb/200kg
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encour-
aged to try to correct the interference by one or more of the following measures:
■ Reorient or relocate the receiving antenna.
■ Increase the separation between the equipment and receiver.
■ Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
■ Consult the dealer or an experienced radio/TV technician for help.

E-14
LIMITED 2 YEAR WARRANTY
A&D Medical Weight Scale
Only for Retail Purchasers within the US. [For retail purchasers
outside the US, NO warranty is provided by A&D – please contact your local
distributor or dealer.]
A&D Medical (“A&D”) warrants to the rst retail purchaser (“You”) that this
weight scale (the “Product”) will be free from defects in material and work-
manship for 2 years under normal use. This Limited Warranty is personal
to You and is not transferable. If a Product is defective, You can return the
Product to the retailer You purchased it from (if within such retailer’s return
time frame) or return it to A&D in accordance with the procedure set forth
below. A&D’s warranty obligation is limited to the repair or replacement, at
A&D’s option, of the defective Product that has been returned by You within
the warranty period. Such repair or replacement will be at no charge to You.
The repaired or replacement Product is warranted hereunder for the longer
of the remainder of the original warranty period or 90 days from the date of
shipment of the repaired or replacement Product. If you return the Product for
warranty service to A&D, You must return the Product, freight and insurance
prepaid, within the warranty period to the address set forth below, together
with satisfactory proof of the date of Your purchase (such as a sales receipt
or statement of online warranty registration). Also, please enclose a check for
return shipping and insurance of the Product back to You.
In the United States, to:
A&D Medical
Attn.: Warranty Department
1756 Automation Parkway
San Jose, CA 95131
1-888-726-9966
Please contact in the US: A&D Medical, at the numbers set forth above for
the appropriate shipping costs.
Warranty

E-15
This Limited Warranty does not cover, and A&D will not be liable for (i)
any shipment damage, (ii) any damage or defect due to misuse, abuse,
failure to use reasonable care, failure to follow written instructions en-
closed with the Product, accident, subjecting the Product to any voltage
other than the specied voltage, improper environmental conditions, or
modication, alteration or repair by anyone other than A&D or persons
authorized by A&D, or (iii) expendable or consumable components.
THIS LIMITED WARRANTY IS THE ONLY WARRANTY FROM A&D;
THERE ARE NO OTHER EXPRESS WARRANTIES. If A&D cannot
reasonably repair or replace the Product, A&D will refund the amount You
paid for the Product (not including taxes), less a reasonable charge for
usage. To receive a refund you must have returned the Product and all
associated materials to A&D. The above remedy of repair, replacement
or refund is your only and exclusive remedy. IN NO EVENT SHALL A&D
BE LIABLE FOR ANY DAMAGES, INCLUDING, WITHOUT LIMITATION,
LOST PROFITS, LOST INFORMATION OR REPLACEMENT COSTS,
ARISING OUT OF YOUR USE OF OR INABILITY TO USE THE PROD-
UCT, INCLUDING, WITHOUT LIMITATION, ANY SPECIAL, INCIDENTAL
OR CONSEQUENTIAL DAMAGES, EVEN IF A&D HAS BEEN ADVISED
OF THE POSSIBILITY OF SUCH DAMAGES. Some states do not allow
the exclusion of incidental or consequential damages, so that the above
exclusions may not apply to you. This warranty gives you specic legal
rights, and you may also have other rights that may vary from state to
state.
No distributor, dealer or other party is authorized to make any warranty on
behalf of A&D or to modify this warranty, or to assume for A&D any liability
with respect to its products.
Bluetooth® devices carry the Bluetooth® logo mark.
iPhone,iPad and iPod are trademarks of Apple Inc., registered in the U.S.
and other countries.
Google and Google logo are registered trademarks of Google,Inc.
Warranty

S-1
Instructivo
Guía de inicio.......................................... S-2
Precauciones de seguridad.....................S-3
Función de comunicación inalámbrica ....S-4
Accesorios...............................................S-4
Nombres de las piezas............................S-5
Instalación (o sustitución de las baterías)S-6
Registro con un receptor (enlace) ...........S-7
Ajustes de la unidad ................................S-8
Medición de su peso................................S-9
Otras funciones .....................................S-10
Especicaciones....................................S-12
Antes de solicitar servicio......................S-13
Mantenimiento de la báscula.................S-13
UC-352BLE
BASCULA DE PESO
CONECTADO DELUXE
Felicidades por la adquisición de una moderna báscula A&D para la salud: una de
las básculas para la salud más avanzadas de las que se dispone en la actualidad.
Este dispositivo, de gran precisión y facilidad de uso por su diseño, facilitará su
régimen de control cotidiano del peso. Se recomienda que lea la totalidad del
presente manual cuidadosamente antes de usar el dispositivo por primera vez.
SMART

S-2
Guía de inicio
Get Started
Measuring
SMART
SMART
lb
SMART
Instale las baterías
Enlace con un receptor
Ajuste la unidad
Súbase a la báscula
Conrme que “StEP” y “oFF” se
muestren de forma alterna
Bájese de la báscula
Conrme su peso
Los datos se transmiten a su dispositivo móvil
Los datos se almacenan en la báscula si no hay
ningún receptor
Comience
Medición

S-3
Precauciones de seguridad
Los elementos siguientes contienen información para evitar el riesgo
de daños o lesiones en el caso de usted u otras personas. Léalos
cuidadosamente y asegúrese de utilizar este producto de forma correcta.
Peligro: Este símbolo señala "un peligro inmediato que podría provocar
la muerte o lesiones graves".
Advertencia Este símbolo señala "la posibilidad de muerte o lesiones
graves".
Precaución Este símbolo señala "la posibilidad de lesiones físicas o daños
a los bienes".
Precauciones de uso
Advertencia
• No se e del autodiagnóstico al intentar bajar de peso o realizar ejercicios terapéuticos; siga las instrucciones
de un médico o especialista.
• No se pare sobre los bordes de la báscula ni brinque sobre esta; la consecuencia podría ser una caída que
produzca lesiones. Además, el impacto podría dañar la báscula.
• No use la báscula sobre una supercie irregular, ya que la báscula podría dañarse. Además, la báscula no
podrá realizar mediciones precisas.
• No use la báscula sobre una supercie resbalosa ni se pare sobre la báscula con los pies húmedos, ya que
podría resbalarse y lesionarse. Además, la báscula no podrá realizar mediciones precisas.
Precaución
•No coloque la báscula donde esté expuesta a agua o humedad excesivas, como en el baño, donde esté
expuesta a la luz solar directa, donde esté expuesta directamente a la salida de aire de una unidad de aire
acondicionado, ni cerca del fuego. Lo anterior podría provocar una descompostura de la báscula.
•Esta báscula solo debe usarse para medir el peso corporal.
•Esta báscula es un dispositivo preciso de medición. No deje caer la báscula ni la exponga a vibraciones ni a
descargas muy fuertes.
• No desarme, repare ni modique la báscula, ya que pueden producirse una descompostura o lesiones.
•Al usar esta báscula, las personas con discapacidad deben recibir el apoyo de quien se encargue de sus
cuidados; de lo contrario, la consecuencia podría ser una caída que produzca lesiones.
•Al instalar las baterías, asegúrese de que los polos + (positivo) y el - (negativo) estén colocados de forma
correcta. La colocación incorrecta puede provocar un sobrecalentamiento, la ltración de uidos de las
baterías o la ruptura de estas, con la consecuencia de daños a la báscula o lesiones.
•Esta báscula está diseñada para el uso personal.
•Guarde la báscula en un lugar alejado de los niños pequeños.
•No guarde esta báscula en posición vertical. Si por alguna razón esta báscula se guarda en posición vertical,
asegúrese de no permitir la caída de la báscula.
•No coloque ningún artículo sobre esta báscula mientras esté guardada.
•Si el uso de esta báscula se comparte con una persona que tenga una enfermedad infecciosa, como
una enfermedad cutánea en los pies, entre otras, limpie la báscula antes de usarla. (Consulte la sección
"Mantenimiento de la báscula (pág.13)" que contiene información detallada sobre cómo limpiar la báscula.
•Para medir su peso de forma precisa, utilice la báscula sobre un piso plano y duro. No use una alfombra ni
otra supercie suave

S-4
Función de comunicación inalámbrica
A&D Medical no se hace responsable de ninguna pérdida generada, como
descomposturas o pérdida de datos que pudieran producirse a raíz del uso de
esta báscula.
No se garantiza que esta báscula pueda conectarse a todos los dispositivos
compatibles con Bluetooth®.
*
*
Accesorios
En caso de que alguno de los accesorios siguientes falte o esté dañado,
comuníquese con el proveedor del producto o una sucursal de ventas de A&D.
Esta báscula utiliza la tecnología inalámbrica Bluetooth®para comunicarse con
un dispositivo receptor. Al nal de la medición, los datos correspondientes se
envían desde esta báscula al dispositivo receptor.
Bluetooth®es una tecnología de comunicación que permite a los dispositivos
comunicarse de forma inalámbrica. El Bluetooth® marca y logos son marcas
registradas que pertencen a Bluetooth SIG, Inc y cualquier uso de estas
marcas por A&D está bajo licensia. Otras marcas registrados y uso de nombres
registrados pertencen a sus duenos respectivos.
Dispositivo receptor
Este es un dispositivo, como una computadora personal o un teléfono inteligente, en el que se
ha descargado e instalado una aplicación que permite la comunicación por Bluetooth®con esta
Precauciones para las funciones inalámbricas
Advertencia
•No debe usarse en lugares donde la comunicación inalámbrica esté prohibida, como en aviones o en hospitales.
Esta báscula podría generar un efecto adverso en dispositivos electrónicos o equipo eléctrico médico.
Precaución
•Si la función de comunicación de esta báscula se utiliza cerca de un dispositivo inalámbrico que se comunique
en la frecuencia de 2.4 GHz, podría disminuir la velocidad de procesamiento de ambos dispositivos. No debe
utilizarse cerca de un horno de microondas donde podría presentarse una interferencia de campo magnético,
electricidad estática u ondas de radio. (Es posible que la señal no llegue debido a razones medioambientales.)
- 1 x Manuel de instrucciones
- 4 x pilas

S-5
Nombres de las piezas
Báscula
SMART
Sección de la pantalla
Símbolos de la pantalla
Pantalla
Compartimiento
para baterías
Patas
Símbolo de "Estable"
Indicador de baterías
Símbolo de
comunicación
por Bluetooth®
Unidad
Símbolo Nombre Descripción
Símbolo de "Lista/Estable" Este símbolo se muestra cuando la pantalla de
medición está estable.
Indicador de baterías
↓
↓
Indicador de nivel bajo de las
baterías
El indicador de potencia normal de las baterías
con la carga restante.
Si se muestra este símbolo, sustituya las cuatro
baterías por unas nuevas.
Parpadeante
Símbolo de la comunicación por Bluetooth®
Sección de la pantalla
Interruptor de ajustes