&Tradition Betty TK7 User manual

Congratulations with your new Betty, designed in 2021
by Thau & Kallio. We hope you will enjoy using this
product and follow these instructions to ensure correct
assembly. If you have any questions or comments,
please do not hesitate to contact us by mail on:
in[email protected]
Betty TK7 & TK8
Thau & Kallio
2021
User instructions

Please read these instructions carefully and retain them
for future reference to ensure that the product is used
correctly. For your own safety, please study each step of
this instruction manual first. &Tradition is not responsible
for any faults or damages caused by not following these
instructions correctly. Do not modify this product in
any way.
Cleaning instructions
Steel
It is recommended only to use a soft dry cloth to clean
plated and powder coated surfaces but in case more severe
cleaning is necessary, a soft cloth wrung in lukewarm water
can be carefully applied. Always dry immediately after
cleaning with a soft dry cloth. Avoid using abrasive cleaning
agents or aggressive cleaning detergents on lated or
powder coated surfaces as this may permanently damage
the surface.
Lacquered wood
For daily care it is recommended to dust the furniture with
a soft cloth. Lacquered wood can be cleaned with a soft
cloth wrung in a mild solution of lukewarm water and a
universal cleaning detergent. Always follow the wood grains
and always dry with a soft dry cloth immediately after
cleaning. Avoid use of abrasive cleaning agents and aggres-
sive cleaning tools such as steel wool, scouring pads or sti
brushes as this will damage the surface of the lacquered
wood.
Steel footrest installation
Step 1
Wipe the stool footrest surface with the supplied alcohol
swab for optimal attachment of the footrest protector.
Be careful only to rub the surface where the footrest
protector will be placed since the alcohol swab might wipe
of some of the pigment in the lacquer.
Betty TK7 & TK8
Thau & Kallio
2021
Step 2
Remove protective liner on the steel protector.
Step 3
Center and place the steel protector on the upper side of
the footrest.
Step 4
Apply firm pressure until the steel protector is attached.

andtradition.com