&Tradition Amore User manual

Amore
Space Copenhagen
2018
Congratulations with your new Amore mirror, designed
by Space Copenhagen. We hope you will enjoy using this
product and follow these instructions to ensure correct
installation. If you have any questions or comments,
please do not hesitate to contact us by mail on:
in[email protected]
Instructions

SC50
SC49/
SC56
Please read these instructions carefully and retain them
for future reference to ensure that the product is used
correctly. For your own safety, please study each step of
this instruction manual first. &Tradition is not responsible
for any faults or damages caused by not following these
instructions correctly.
Contents
The package contains mirror SC49, SC50 or SC56:
- SC49: Ø115
- SC50: 190×60
- SC56: Ø70
- 2 nylon plugs (only suitable for drywall or concrete wall)
- 2 slotted screws
Tools needed
- Correct screws and plugs for the specific wall type
- Spirit level
- Electric drill
- Screwdriver
Safety precautions
- Dispose of plastic bag from packaging and do not allow
children to play with it.
- Keep product well out of children’s reach.
- The product is only intended for interior use.
- Make sure that the approriate screws and plugs are used
to mount the mirror.
- Two or more adults are needed to lift the mirror.
- The supplied plugs are only suitable for drywall and
concrete wall.
Cleaning instructions
- Use household glass cleaner for the mirror. To avoid
damaging the surface of the mirror frame, always spray
the glass cleaner onto a soft cloth and clean the mirror
with the cloth. Do not spray directly on the mirror.
- Wipe mirror frame with a soft, damp sponge or cloth, and
wipe immediately with a dry cloth.
Step 1
Using a spirit level, mark the placement of the mirror with
a pencil. Amore SC50 can be hung both vertically and
horisontally and the positioning and numbers of the screws
vary accordingly.
Place screws with the following distance:
Amore SC49 - 75 cm
Amore SC50 (vertical) - 44 cm
Amore SC50 (horizontal) - 179 cm
Amore SC56 - 40cm
Step 2
Drill holes in the wall according to the marks and insert
the appropriate type of screws and plugs for the type of
wall, on which the mirror should be mounted. Make sure
that the head of the screw is out far enough from the wall,
so the suspension mount on the mirror has an adequate grip.
Step 3
Once the screws are securely in place the mirror can be
mounted. Make sure that the suspension mounts have a
firm grip on both screws. Please note that two adults are
required to lift the mirror.
Amore
Space Copenhagen
2018
- Do not use any abrasive cleaning tools such as steel wool,
scouring sponges or sti brushes.
- Never use strong cleaning agents such as white spirit,
terpentine, household glass cleaner or cellulose thinners
on the mirror frame.

andtradition.com