&Tradition Rely Chair User manual

This manual will help you change the components on
your Rely chair. Follow these instructions to ensure
correct installation. If you have any questions or
comments, please do not hesitate to contact us by mail
on:
[email protected]
Changing Rely
components
Instructions

Exchanging Rely
components
Please read these instructions carefully and retain them
for future reference to ensure that the components are
changed correctly. For your own safety, please study
each step of this instruction manual first. &Tradition is
not responsible for any faults or damages caused by not
following these instructions correctly.
These instructions are relevant for the following Rely
chair bases and components:
ASwivel base with castors
B Swivel base
C Tube legs
D A-frame
Tools needed
- Screwdriver
Swivel base with castors — Changing the swivel base
Step 1
Remove the screws with a screwdriver and carefully set
aside the seat.
Step 2
Place the new base in the correct position.
Step 3
Mount the screws using a screwdriver. Be careful not to
overturn if using a power tool.
A
C
D
B

Swivel base — Changing the base
Step 1
Remove the screws with a screwdriver and carefully set
aside the seat.
Step 2
Place the new base in the correct position.
Step 3
Mount the screws using a screwdriver. Be careful not to
overturn if using a power tool.
Swivel base with castors — Changing the castors
Step 1
Pull out the castors. No tools are required for this.
Step 2
Attach the new castors by pressing them into the tube
until you hear a click. No tools are required for this.

Tube base — Changing the gliders
Step 1
Change or add gliders by unclipping them (plastic gliders
or felt gliders) No tools are required for this.
Tube base — Changing the base
Step 1
Remove the screws with a screwdriver and carefully set
aside the seat.
Step 2
Place the new base in the correct position.
Step 3
Mount the screws using a screwdriver. Be careful not to
overturn if using a power tool.

A-base — Changing the base
Step 1
Remove the screws with a screwdriver and carefully set
aside the seat.
Step 2
Place the new base in the correct position.
Step 3
Mount the screws using a screwdriver. Be careful not to
overturn if using a power tool.

andtradition.com