Anthro Zido ZHKzz User manual

ASSEMBLY INSTRUCTIONS
Anthro Corporation®| 10450 SW Manhasset Dr. | Tualatin, OR 97062
Toll-free: 800.325.3841 | Fax: [phone] | email: [email protected] | anthro.com
Outside the U.S. | Tel: [phone] | Fax: [phone]
Zido™Hooks
May 2007, Rev A
NOTE: The Zido cart is not included.
Product Part#
Zido Hooks ZHKzz

WELCOME
Thank you for purchasing
Zido Hooks.
If you have any questions or if we
can help you in any way, please
contact us at 800.325.3841.
PARTS LIST
Before beginning assembly of your Zido Hooks, please review
the parts list to verify that your shipment is complete.
2
Product Quantity Part Number
01 Hooks 2 175-5219-00
02 3/4" Self-threading Screw 2 325-5010-00
01
02

ZidoTM Hooks Assembly Instructions 3
STEP 1
Align the Hooks
¡Select an installation point for the Hooks.
¡Align the hooks with the holes on the Zido
tube, top hook facing up and bottom hook
facing down.
STEP 2
Install the Hooks
¡Attach each Hook to the cart with one self-threading fastener.
Note: These fasteners are creating the threads in the tube, so the first few turns will require some force.
CONGRATULATIONS! YOUR ZIDO HOOK ASSEMBLY IS COMPLETE!
Self-threading Screw
325-5010-00

*300-5406-00*
300-5406-00
Anthro Corporation®| 10450 SW Manhasset Dr. | Tualatin, OR 97062
Toll-free: 800.325.3841 | Fax: [phone] | email: [email protected] | anthro.com
Outside the U.S. | Tel: [phone] | Fax: [phone]
Warranty:
For warranty information, please visit: http://www.anthro.com/support/warranty
Notices:
Technology Furniture and Zido are trademarks of Anthro Corporation. Anthro reserves the right to modify the design and specifications without prior notice.