AnyTone AT-3318UV User manual

A1.0-12/07
A1.140424

DUAL BAND HANDHELD RADIO
INSTRUCTION MANUAL

THANK YOU!
transceiver will provide you with reliable, clear and efficient communication service. The
transceiver introduces innovative DSP digital signal processing technology, high degree integration, it is
including kinds of professional function, best stability and great reliability as well as exterior smooth lines,
novel, fashionable, sturdy and durable.
The transceiver includes plenty of TX, RX channels, as well as UU,VV and UV standby modes which
are able to realize dual PTT functions. 51 groups of CTCSS encode/decode and 1 group of user-dened
CTCSS encode/decode, 1024 groups of DCS encode/decode, 5TONE/2TONE/DTMF encode/decode,
built-in radio functions, etc..It is a meticulous build functional and Multi frequency band radio for radio
amateur and commercial users.
Versions
Version A: Dual frequency, dual standby, dual display, dual band, single receive channel.
MODELS APPLY TO THIS MANUAL
AT-3318UV FM transceiver
AT-3318UV(Version A) programming software: QPS3318UV_USA
PROGRAM CAUTIONS
When programming the transceiver, read the factory initial data rst, then rewrite the frequency and
signaling etc., other wise errors may occur because of different frequency ranges involved.

CAUTIONS
transceiver is excellent designed with advanced technology. The following tips will be helpful for you in
performing your obligation under warranty and understanding the safety of transceiver usage.
1.Keep the transceiver and accessories away from children.
2.Please do not try to open or modify the transceiver without permission, non-professionals operation may also cause
damage.
3.Please use assorted battery and charger to avoid damage.
4.Please use assorted antenna to ensure the communication distance.
5.Please avoid exposing the radio under the sunshine for a long time or storing it in too hot places. High temperature will
shorten the life of electronic devices.
6.Please avoid storing the radio in the dusty, dirty and damp areas.
7.Please keep the radio dry. Do not wash radio with ardent chemicals and detergents.
8.Do not transmit without antenna.
9.When using this transceiver, we recommend transmitting for 1 minute then receiving for 4 minutes. continuously
transmitting for long time or working in high power will heat the back of the transceiver. Do not place the transceiver's hot
back close to any plastics.
10.If any abnormal smell or smoke coming from the transceiver, please turn off the power instantly and take off the battery
and its case. Then contact local dealers.
NOTE：
All the above tips apply for your transceivers' accessories. If any device can not operate
normally, please contact with local dealers.
If you use any accessories made by other companies, company does not guarantee the
operability and safety of the transceiver.

I
TABLE OF CONTENTS
UNPACKING.................................................................................................................................................................................................... 01
Supplied Accessories ......................................................................................................................................................................... 01
STANDARD ACCESSORIES/ADDITIONAL ACCESSORIES............................................................................................... 02
Standard Accessories.......................................................................................................................................................................... 02
Additional Accessories........................................................................................................................................................................ 02
OPERATION MODE (AMATEUR TRANSCEIVER OR PROFESSIONAL TRANSCEIVER) ................................. 03
WORKING MODE (AMATEUR TRANSCEIVER OR PROFESSIONAL TRANSCEIVER)...................................... 04
BATTERY INFORMATION........................................................................................................................................................................ 05
Charging Operation .............................................................................................................................................................................. 05
Battery Charger Type........................................................................................................................................................................... 05
Notice for Charging Battery .............................................................................................................................................................. 05
How to Charge........................................................................................................................................................................................ 06
Charging Prompt.................................................................................................................................................................................... 08
How to Store the Battery.................................................................................................................................................................... 08
INSTALLATION & CONNECTION........................................................................................................................................................ 09
Installing / Removing the Li-ion Battery...................................................................................................................................... 09
Installing / Removing the Antenna................................................................................................................................................. 10
Installing / Removing the Belt Clip ................................................................................................................................................ 10
Installing Optional Speaker / Microphone.................................................................................................................................. 11
GETTING ACQUAINTED.......................................................................................................................................................................... 12
LCD Display ............................................................................................................................................................................................. 12
BASIC OPERATIONS................................................................................................................................................................................. 15
Turn the Radio On & OFF ................................................................................................................................................................. 15
Adjusting Volume................................................................................................................................................................................... 15
Switch between Main band and Sub band ............................................................................................................................... 16

II
TABLE OF CONTENTS
Switch between Channel mode and VFO mode.................................................................................................................... 16
Channel Adjusting ................................................................................................................................................................................. 16
Frequency Adjusting............................................................................................................................................................................. 16
Frequency Input by Keypad ............................................................................................................................................................. 17
Channel Input by Keypad .................................................................................................................................................................. 17
Squelch Off Momentary / Squelch Off......................................................................................................................................... 18
Receiving................................................................................................................................................................................................... 18
Transmitting.............................................................................................................................................................................................. 18
Emergency Alarm .................................................................................................................................................................................. 19
Side Key [PF1] function instruction............................................................................................................................................... 19
Side key [PF2] function instruction................................................................................................................................................ 20
Edit channel.............................................................................................................................................................................................. 20
Delete channel........................................................................................................................................................................................ 20
Programming scan................................................................................................................................................................................ 21
SHORTCUT OPERATIONS ..................................................................................................................................................................... 22
Add/Cancel Optional signal decode function........................................................................................................................... 22
CTCSS/DCS Scan................................................................................................................................................................................ 22
Offset Frequency Direction Setup................................................................................................................................................. 23
Frequency/Channel Scan.................................................................................................................................................................. 23
Channel Scan Skip ............................................................................................................................................................................... 24
Frequency Reverse .............................................................................................................................................................................. 24
TX Power selection............................................................................................................................................................................... 25
Stopwatch function................................................................................................................................................................................ 25
DTMF code Transmit and Enquiry ................................................................................................................................................ 25
Keypad lock.............................................................................................................................................................................................. 26
Single-band Switching......................................................................................................................................................................... 27

III
TABLE OF CONTENTS
CTCSS/DCS Encode and Decode................................................................................................................................................ 27
Function Menu Setup................................................................................................................................................................................ 28
CTCSS/DCS Encode Setup............................................................................................................................................................. 28
CTCSS/DCS Decode Setup............................................................................................................................................................. 29
CTCSS/DCS Encode / Decode Synchronous Setup........................................................................................................... 29
5TONE Encode Group Selection................................................................................................................................................... 30
2TONE Encode Group Selection................................................................................................................................................... 31
Optional Signaling Setup ................................................................................................................................................................... 31
Squelch mode Setup............................................................................................................................................................................ 32
Frequency Step Size Setup.............................................................................................................................................................. 33
Wide / Narrow Band Selection ....................................................................................................................................................... 33
Frequency Reverse .............................................................................................................................................................................. 34
Talk Around ON/OFF............................................................................................................................................................................ 34
Offset Frequency Setup ..................................................................................................................................................................... 35
Editing Channel Name........................................................................................................................................................................ 35
Busy Channel Lockout........................................................................................................................................................................ 35
TX OFF....................................................................................................................................................................................................... 36
Band Limit ................................................................................................................................................................................................. 37
Sub Band Display Setup.................................................................................................................................................................... 37
Keypad Voice Prompt Setup............................................................................................................................................................ 38
Time-Out-Timer (TOT)......................................................................................................................................................................... 38
Voice Operated Transmission (VOX) Setup............................................................................................................................. 39
VOX Delay Setup .................................................................................................................................................................................. 39
Automatic Power Off Time Setup................................................................................................................................................... 40
DTMF Transmitting Time Setup...................................................................................................................................................... 40
Squelch level Setup.............................................................................................................................................................................. 41

IV
TABLE OF CONTENTS
Scan Dwell Time Setup ...................................................................................................................................................................... 41
Function Icon Stay Time Setup....................................................................................................................................................... 42
LCD Backlight Setup............................................................................................................................................................................ 42
LCD Backlight Color Setup............................................................................................................................................................... 43
Self ID Inquiry.......................................................................................................................................................................................... 43
Tone Pulse Frequency Selection ................................................................................................................................................... 44
Battery Save Setup............................................................................................................................................................................... 44
FM Radio ................................................................................................................................................................................................... 45
FM Radio Functions............................................................................................................................................................................. 45
PF1 key Function Setup..................................................................................................................................................................... 46
Senior Function Operations ................................................................................................................................................................. 47
Display Mode Setup............................................................................................................................................................................. 47
Resume Factory Default .................................................................................................................................................................... 47
Cloning Cable.......................................................................................................................................................................................... 48
Memory Bank................................................................................................................................................................................................. 50
Memory Channel Mode ...................................................................................................................................................................... 50
Memory Bank Switch........................................................................................................................................................................... 50
Memory Bank Exit................................................................................................................................................................................. 50
Bank Linking............................................................................................................................................................................................. 51
Programming software starting (Takes Windows XP system for example) ........................................................... 52
TECHNICAL SPECIFICATION............................................................................................................................................................... 53
TROUBLE SHOOTING GUIDE.............................................................................................................................................................. 54
ATTACHED CHART..................................................................................................................................................................................... 56
CTCSS Frequency Chart................................................................................................................................................................... 56
1024 groups DCS Frequency Chart............................................................................................................................................. 57

01
UNPACKING
Please carefully unpack the transceiver. We recommend that you identify the items listed in the following
table before discarding the packing material.
If any items are missing or have been damaged during shipment, please contact with dealers immediately.
Item Number Quantity
Antenna QA09UV2 1
Li-ion Battery QB-26L 1
Battery Charger QBC-26L 1
AC Adaptor QPS-01 1
Belt Clip BC01 1
Hand Strap GS01 1
Instruction Manual 1
Certicate 1
Supplied Accessories

02
STANDARD ACCESSORIES/ADDITIONAL ACCESSORIES
Standard Accessories
Additional Accessories
Antenna*1
QA09UV1
155/435MHz
*1.Note: For frequency band of antenna, please refer to label
indicated in the bottom of the antenna.
Li-ion Battery
QB-26L(1500mAh)
Spare Li-ion Battery
QB-26HL(2200mAh)
Instruction
Manual
USB Programming
Cable PC03
Programming Software
QPS3318UV_USA
Earphone
HS03
Handheld Microphone
QHM22
Battery Charger
QBC-26L
AC Adaptor
(12V/500mA)
QPS-01
Belt Clip
BC01
Battery Pack for Car
Charger CPS01
Telescopic antenna
QA10UV
Cloning Cable
CP04
Car Charger
CPL03
Hand Strap
GS01

03
The transceiver is a high performance amateur transceiver with dual band, dual standby, dual display and
other kinds of functions. According to practical application, you can set the radio to operate as Amateur
Transceiver or Professional Transceiver. There are also 3 levels operation menu to set functions as per you
need. It is easy and convenient.
Operation Mode:1.
By programming software:A. In PC software's "General Setting" menu to
choose "Display Mode", channel mode works as Professional transceiver,
other two modes as Amateur transceiver.
By manual setup:B. Please refer to "Display Mode" in Page 47.
Amateur Transceiver Mode:
2. Except setting as CH mode, others considered
as Amateur transceiver mode. Under this mode, press key to switch
between Channel mode and VFO.
Frequency + Channel mode:A. At this mode, When set display as "FREQ", it
enters into Frequency+Channel mode, new setting of channel operation and
shortcut operation can be temporarily used by user. Once the radio is turned
off or switched to another channel, the temporary setting will be erased and
back to initial settings.(As pic 1)
Channel+Name Tag Mode:B. When set display as "NAME", it enters into
Channel+Name Tag Mode. At this mode, it will display corresponding
channel name when the current channel is edited with name. Otherwise, it
will display frequency + channel. Its operations are the same as frequency +
channel mode. (As pic 2)
OPERATION MODE (AMATEUR TRANSCEIVER OR
PROFESSIONAL TRANSCEIVER)
(Pic 1)
(Pic 2)
(Pic 3)
(Pic 4)

04
WORKING MODE (AMATEUR TRANSCEIVER OR PROFESSIONAL TRANSCEIVER)
VFO Mode(Frequency mode):C. This mode shows only frequency on the display. Shortcut operation
and Channel setting will be changed & stored as the latest value permanently. Once the radio is
turned off or changed to new VFO frequency, the value is remained until next change.(As pic 3)
Professional Transceiver Mode:
3. When set display mode as "CH", it enters into Professional Transceiver
mode. At this mode, except scan, DTMF encode or editing, and keypad lock, other functions should be set
by PC software (As pic 4).
NOTE:If transceiver programmed transceiver as professional mode and locked, you can't return to amateur
transceiver mode by manually from Background operations setting.
Under every mode, background operations can be changed and saved.
4.

05
BATTERY INFORMATION
Charging Operation
The battery is not charged at the factory, please charge it before use. Charge the battery for the rst time
after purchase or extended storage (more than 2 months) may not bring the battery to its normal operating
capacity. After repeating fully charge/ discharge cycle for two or three times, the operating capacity will
reach the best performance. The battery life is over when its operating time decreases even though it is
fully and correctly charged. Replace the battery.
Battery Charger Type
Please use our company's designated charger, other models may cause explosion and injure people. After
installing the battery, if the radio red light twinkles and remind changing battery, please charge the battery.
Notice for Charging Battery
Do not shortcircuit our company designated charger. Never attempt to remove the casing from the▲
battery, we show no responsibility on the faulty caused by modifying freely without permission of our
factory.
The ambient temperature should be between 5▲℃ and 40℃in charging. Charging outside this range
may not fully charge the battery.
Always switch off the transceiver equipped with a battery before charging. Otherwise, it will interfere▲
with correct charging.
To avoid interfering the charging procedure, please do not cut off the power or take out the battery▲
during charging.

06
How to Charge
1.Plug the AC adaptor into the AC outlet, then plug the
cable of AC adaptor into the DC jack, the indicator
lights orange for 1s and turns into GREEN---waits to
charge.
2.Slide the battery or transceiver with battery into the
charger; make sure the battery terminals are in contact
with the charging terminals well. LED turns into twinkling
RED---pre-charging begins.
3.Pre-charging for about 5 minutes, LED twinkles stop
then charging begins.
4.It takes about 4 hours to fully charge the battery, when
LED turns into GREEN— full charged.
BATTERY INFORMATION
WARNING:
When keys or ornamental chains and other electric metals contact with the battery terminals, the battery
may cause damage or hurt bodies. If the battery terminal short circuit, it will generate a lot of heat, please
be careful when you bring or use the battery, please put battery or radio into insulated container. Do not put
it into metal container.
Do not recharge the battery if it is already fully charged. This may shorten the life of the battery or▲
damage the battery.
Do not charge the battery or transceiver if it is damp. Dry it before charging to avoid danger.▲
Ac Input

07
NOTE: When charging a power-on transceiver equipped with battery, the LED will not turn into green to
show the full charge status. Only when turn off the transceiver, the LED can indicate normally.
Because when the transceiver is power on, it would consumes energy, the charger cannot detect when battery
has been fully charged, the charger will charge battery in voltage consumption and fail to indicate correctly.
BATTERY INFORMATION
Status LED
STATUS self-examine
when power on (No battery) Pre-charging Charge normally
Full
Charged Trouble
LED Orange
(for 1 second) Green Red light twinkles for 5 minutes Red Green Red twinkles for a long time
5.Charging Process:
6.LED Indicator:
NOTE: Trouble means battery heating, battery short-circuit or charger short-circuit.
Standby (self-examine orange lights
1second when power on)
Pre-charging (pre-charging stage)
Charging (charge in constant currency)
Full charged (charge in constant voltage)
Green light
Red light twinkles for about 5 minutes
RED light lightens for about 4 hours
Green light

08
How to Store the Battery
1. If the battery needs to be stored for a long
period, the battery should be removed
from the radio. It's state of charge should
be 50-100% of full charge.
2.It should be kept in low temperature, dry
environment.
3.To keep away from hot places and direct
sunlight.
Charging Prompt
1. Self- examination: When charging, ORANGE light twinkles for 1 second and goes out. That means the
charger has passed its self-examination and it can charge the battery normally. If the light remains orange
or the red light twinkles, which means the charger can not pass its self-examination or charge the battery.
2. Trickle pre-charging: When the battery has been inserted into the charger and red light twinkles, which
means the remnant voltage is low, the charger trickle charge the battery (pre-charging status ), until the
battery reaches a certain electric quantity, the charger automatically turns into normal charging. And
if the red light stop twinkling, which means the remnant voltage meets a certain electric quantity, the
charger will charge the battery normally.
BATTERY INFORMATION
NOTE:The time for Trickle pre-charging should not exceed 30 min. If after 30 min, the red indicator is still
twinkling, it means it is unable to charge battery. Please kindly check battery and charger.
WARNING
▲Do not short circuit battery terminals.
▲Never attempt to remove the casing from the battery
pack.
▲Never assemble the battery in dangerous surroundings,
spark may cause explosion.
▲Do not put the battery in hot environment or throw it
into fire, it may also cause explosion.

09
INSTALLATION & CONNECTION
1. Match the three grooves of the battery pack with the corresponding
guides on the back of the transceiver and push.
2. Press the battery pack and transceiver rmly together until the
release latch on the top of the transceiver locks. After hearing a
"click" sounds, the battery has been locked.
3. To remove the battery pack, slide up the release latch and
remove the pack away from the transceiver.
Installing / Removing the Li-ion Battery
Installing / Removing the Antenna
■ Installing the Antenna:
Screw the antenna into the connector on the top of the transceiver
by holding the antenna base and turning it clockwise until secure.
■ Removing the Antenna:
Turn the antenna anticlockwise to remove it.

10
INSTALLATION & CONNECTION
Installing Optional Speaker / Microphone
Unveil the MIC-SP jack cover and then insert the
Speaker/Microphone plug into MIC-SP jack.
Note:The transceiver is less water resistant while using the
Speaker/Microphone.
Installing / Removing the Belt Clip
■ Installing the Belt Clip:
Place the belt clip to the corresponding grooves on the back of
the transceiver, and then Clockwise screw it.
■ Removing the Belt Clip:
Anticlockwise turn screws to remove the belt clip.

11
INSTALLATION & CONNECTION
Installing the Hand Strap
Slide the loop of the hand strap through the eyelet on
the upper rear of the transceiver, pull the entire hand
strap through the loop to secure the hand strap in place.