Aplex OPC-5**8 Series User manual

OPC-5XX8(P) Series
12.1”, 15”and 15.6”Intel Celeron N2930 Open Frame Panel PC
User Manual
Release Date Revision
Apr. 2017 V1.1
®2016 Aplex Technology, Inc. All Rights Reserved. Published in Taiwan
Aplex Technology, Inc.
15F-1, No.186, Jian Yi Road, Zhonghe District, New Taipei City 235, Taiwan
Tel: [phone] Fax: [phone] URL: www.aplextec.com

OPC-5XX8(P) Series User Manual
1
Revision History
Reversion
Date
Description
0.1
2016/04/19
For Preliminary Release
1.0
2016/10/06
Official Version
1.1
2017/04/05
Add 12”new inch product
Revised touch screen software driver to
Win8.1/10

OPC-5XX8(P) Series User Manual
2
Warning!________________________
Caution
Risk of explosion if the battery is replaced with an incorrect type.
Batteries should be recycled where possible. Disposal of used batteries must be in
accordance with local environmental regulations.
Disclaimer
This information in this document is subject to change without notice. In no event
shall Aplex Technology Inc. be liable for damages of any kind, whether incidental or
consequential, arising from either the use or misuse of information in this
document or in any related materials.
Electric Shock Hazard –Do not operate the machine with its back cover removed.
There are dangerous high voltages inside.
This equipment generates, uses and can radiate radio frequency energy and
if not installed and used in accordance with the instructions manual, it may cause
interference to radio communications. It has been tested and found to comply
with the limits for a Class A computing device pursuant to FCC Rules, which are
designed to provide reasonable protection against such interference when
operated in a commercial environment. Operation of this equipment in a
residential area is likely to cause interference in which case the user at his own
expense will be required to take whatever measures may be required to correct
the interference.

OPC-5XX8(P) Series User Manual
3
Packing List
Accessories (as ticked) included in this package are:
□Adaptor
□Driver & manual CD disc
□Other.___________________(please specify)

OPC-5XX8(P) Series User Manual
4
Safety Precautions
Follow the messages below to prevent your systems from damage:
◆Avoid your system from static electricity on all occasions.
◆Prevent electric shock. Don‘t touch any components of this card when
the card is power-on. Always disconnect power when the system is not
in use.
◆Disconnect power when you change any hardware devices. For instance,
when you connect a jumper or install any cards, a surge of power may
damage the electronic components or the whole system.

OPC-5XX8(P) Series User Manual
5
Table of Contents
Revision History…………………………………………………………………………………………………….1
Warning!/Caution/Disclaimer……………...................................…………………………….…2
Packing List…………………………………….……………………………………………………………………..3
Safety Precautions…………………………………………………………………….…..……………………..4
Chapter 1 Getting Started
1.1 Features………………………..………………………...…………………………..7
1.2 Specifications…………………...………………………………………………….7
1.3 Dimensions………………………....…………………………………………..….9
1.4 Brief Description of OPC-5XX8(P) Series….…………………….……12
Chapter 2 Hardware
2.1 Motherboard Introduction……………………...……………..………....15
2.2 Specifications…………………………..…………………………………………15
2.3 Jumpers and Connectors Location……………………………………...19
2.4 Jumpers Setting and Connectors…………………………………..……20
Chapter 3 BIOS Setup
3.1 Operations after POST Screen…...…….……...…………………………33
3.2 BIOS Setup Utility……………………………………………………………….33
3.3 Main Settings……………………………………..………………………………34
3.4 Advanced Settings……………………………………………………………...35
3.5 Chipset Settings……………………………………….………………………...43
3.6 Security Settings…………………………………………….…………………..45
3.7 Boot Settings…..………………………………………….……………………..46
3.8 Save & Exit Settings……………………………………..…………………....47
Chapter 4 Installation of Drivers
4.1 Intel (R) AtomTM SoC Chipset ………..……...………….………………50
4.2 Intel (R) VGA Chipset……………………………………………….……......53
4.3 Realtek ALC662 HD Audio Driver Installation………………………56
4.4 COM Driver……………………………….……………………………………….58
4.5 Intel_TXE(Win) Driver…..……………..…………………………………….60

OPC-5XX8(P) Series User Manual
6
Chapter 5 Touch Screen Installation
5.1 Windows 8.1/10 Universal Driver Installation for PenMount
6000 Series……………………....………….…………………………………...63
5.2 Software Functions…………………………………………………………....67
Figures
Figure 1.1: Dimensions of OPC-5128(P).……..…………………..……………….....9
Figure 1.2: Dimensions of OPC-5158(P).……..…………………..………………...10
Figure 1.3: Dimensions of OPC-5168(P).……..…………………..…………………11
Figure 1.4: Front View of OPC-5128(P)…………………………………….…….….12
Figure 1.5: Rear View of OPC-5128(P)…………………………………………….….12
Figure 1.6: Front View of OPC-5158(P)…………………………………….…….….13
Figure 1.7: Rear View of OPC-5158(P)…………………………………………….….13
Figure 1.8: Front View of OPC-5168(P)…………………………………….…….….14
Figure 1.9: Rear View of OPC-5168(P)………………………..……………….….….14
Figure 2.1: Motherboard Dimensions………………………………………….…….18
Figure 2.2: Jumpers and Connectors Location-Board Top……………….….19
Figure 2.3: Jumpers and Connectors Location-Board Bottom…………..…19

OPC-5XX8(P) Series User Manual
7
Chapter 1 Getting Started
1.1 Features
x86 base Intel Celeron N2930 Processor
Low Power Consumption Design
Slim, Fanless, and Front Bezel IP65 Design
Easily Achieve Flat Front Bezel Design
Adjustable Front Bezel Design(2mm, 3mm and 6mm Front Bezel)
Variety of LCD size available 12.1”, 15”and 15.6”
Optional for High Brightness and Optical Bonding
5-wire Resistive Touch Window/Projected Capacitive Touch Screen Support 7H Optional
Wide-ranging 9~36V DC Power Input with System Power LED Light
1.2 Specifications
OPC-5128(P)
OPC-5158(P)
OPC-5168(P)
System
CPU
Onboard Intel Celeron N2930 1.83 GHz Processor
Chipset
SoC
Memory
Onboard 4GB DDR3L 1600MHz
IO Port
USB
2 x USB 3.0 type A
Serial/Parallel
1 x RS-232/422/485 DB-9, Default RS-232, COM1
1 x RS-232 DB-9, COM2
Audio
1 x Audio Line Out
LAN
2 x GbE LAN RJ-45
Power
1 x 3-pin DC Power input terminal
1 x 2-pin connector for power on/off button
Others
1 x System power LED light
Option
2 x RS-232 DB-9 + 1 x Mini-PCIe slot via TB-528C2ME1
2 x CAN bus via TB-528CAN2
2 x USB 2.0 type A Via TB-528U2
2 x USB 2.0 type A + 1 x Mini-PCIe slot + 1xRS-232 DB-9 + 1 x Power button
via TB-528C1U2P1
Storage Space
Storage
1 x 2.5”SATA HDD bay for SATA HDD

OPC-5XX8(P) Series User Manual
8
Expansion
Expansion Slot
1 x Intel Mini-PCIe slot full size
Display
Display type
12.1”color TFT LCD
15”color TFT LCD
15.6”color TFT LCD
Max. Resolution
800 x 600
1024 x 768
1024 x 768
1366 x 768
Max. Color
262K
16.2M
16.7M
16.7M
Luminance (cd/m2)
450
500
450
300
Contrast Ratio
800
700
800: 1
500: 1
Viewing Angle
160(H)/ 150(V)
160(H)/140(V)
160(H) / 140(V)
160(H) / 160(V)
Backlight Lifetime
50,000 hrs
60,000 hrs
50,000 hrs
Touch Screen –Resistive Touch Window Type
Interface
USB
Light Transmission
Over 80%
Touch Screen –Projected Capacitive Type
Interface
USB
Light Transmission
Over 90%
Power
Power Input
9~36V DC
Power Consumption
MAX: 18.8W (OPC-5128)
MAX: 19.5W (OPC-5128P)
MAX: 19.3W (OPC-5158)
MAX: 20.1W (OPC-5158P)
MAX: 19.4W (OPC-5168)
MAX: 21.5W (OPC-5168P)
Mechanical
Front Bezel
Flat Bezel Design(2mm, 3mm, 6mm)/Steel/Stainless Steel/Aluminum
With System Power LED Light
Rear Bezel
Steel
IP Rating
IP65 Compliant front panel
Dimension
323 x 263 x 54 mm
409 x 323.5 x 54.8 mm
447 x 297 x 61.8 mm
Net Weight
3.7 Kg
4.9 Kg
5 Kg
Environmental
Operating
temperature
0~40°C without fan / 0~60°C with fan
Storage temperature
-20~60°C
Storage humidity
10 to 90% @ 40°C, non- condensing

OPC-5XX8(P) Series User Manual
9
Certification
CE / FCC Class A
Operating System Support
OS Support
Windows Embedded Compact 7
Windows Embedded Standard 7
Windows 7 Professional for Embedded Systems
Windows 7 Ultimate for Embedded Systems
Windows Embedded 8 Standard,
Windows Embedded 8.1 Industry Pro
Windows 10 IoT Enterprise 2015LTSB
1.3 Dimensions
Figure 1.1: Dimensions of OPC-5128(P)