Arbor Technology Em104-i230F User manual

1
Em104-i230F
PC/104 CPU Module
User’s Manual
Version 1.0
2016.02
85
85

- 2 -
This page is intentionally left blank.

- i -
Revision History
Version Release Time Description
1.0 February, 2016 Initial release

- ii -
Contents
Table of Contents
Revision History .................................................................................i
Table of Contents ..............................................................................ii
Preface................................................................................................v
Copyright Notice ..................................................................................... v
Declaration of Conformity ....................................................................... v
CE.................................................................................................... v
FCC Class A ................................................................................... vi
RoHS .............................................................................................. vi
SVHC / REACH .............................................................................. vi
Replacing Lithium Battery ......................................................................vii
Technical Support ..................................................................................vii
Warranty................................................................................................viii
Chapter 1 - Introduction....................................................................1
1.1. The Product .....................................................................................2
1.2. About this Manual ............................................................................2
1.3. Specications................................................................................... 3
1.4. Inside the Package ..........................................................................4
1.5. Ordering Information ........................................................................ 4
1.5.1. Optional Accessories .............................................................4
Chapter 2 - Getting Started...............................................................5
2.1. Board Dimensions............................................................................6
2.2. Block Diagram..................................................................................7
2.3. Jumpers and Connectors................................................................. 8
2.3.1. Layout ....................................................................................8
2.3.2. Jumpers ...............................................................................10
2.3.3. Connectors ..........................................................................13
2.4. Driver Installation Notes................................................................. 30
Chapter 3 - BIOS..............................................................................31
3.1. Main ...............................................................................................33
3.2. Advanced .......................................................................................34
3.2.1. Boot Conguration ............................................................... 35
3.2.2. On Board Device Support.................................................... 35
3.2.3. Video Conguration .............................................................36
3.2.4. SATA Conguration.............................................................. 37
3.2.5. SIO FINTEK81866D ...........................................................38
3.3. Security ..........................................................................................39
3.4. Boot................................................................................................40
3.5. Exit .................................................................................................42

- iii -
Contents
Appendices ......................................................................................43
Appendix A. I/O Port Address Map .......................................................44
Appendix B. Memory Address Map.......................................................46
Appendix C. Interrupt Request Lines (IRQ) ..........................................48
Appendix D: Watchdog Timer (WDT) Setting........................................ 49

- iv -
This page is intentionally left blank.

- v -
Preface
Preface
Copyright Notice
All Rights Reserved.
The information in this document is subject to change without prior notice in
order to improve the reliability, design and function. It does not represent a
commitment on the part of the manufacturer.
Under no circumstances will the manufacturer be liable for any direct, indirect,
special, incidental, or consequential damages arising from the use or inability
to use the product or documentation, even if advised of the possibility of such
damages.
This document contains proprietary information protected by copyright. All rights
are reserved. No part of this manual may be reproduced by any mechanical,
electronic, or other means in any form without prior written permission of the
manufacturer.
Declaration of Conformity
CE
The CE symbol on your product indicates that it is in compliance with the
directives of the Union European (EU). A Certicate of Compliance is available
by contacting Technical Support.
This product has passed the CE test for environmental specications when
shielded cables are used for external wiring. We recommend the use of shielded
cables. This kind of cable is available from ARBOR. Please contact your local
supplier for ordering information.
This product has passed the CE test for environmental specications. Test
conditions for passing included the equipment being operated within an
industrial enclosure. In order to protect the product from being damaged by ESD
(Electrostatic Discharge) and EMI leakage, we strongly recommend the use of
CE-compliant industrial enclosure products.
Warning
This is a class A product. In a domestic environment this product may cause
radio interference in which case the user may be required to take adequate
measures.

- vi -
Preface
FCC Class A
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1)This device may not cause harmful interference, and
(2)This device must accept any interference received, including interference that
may cause undesired operation.
NOTE:
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the
interference at his own expense.
RoHS
ARBOR Technology Corp. certies that all components in its products are
in compliance and conform to the European Union’s Restriction of Use of
Hazardous Substances in Electrical and Electronic Equipment (RoHS) Directive
2002/95/EC.
The above mentioned directive was published on 2/13/2003. The main purpose
of the directive is to prohibit the use of lead, mercury, cadmium, hexavalent
chromium, polybrominated biphenyls (PBB), and polybrominated diphenyl
ethers (PBDE) in electrical and electronic products. Member states of the EU
are to enforce by 7/1/2006.
ARBOR Technology Corp. hereby states that the listed products do not contain
unintentional additions of lead, mercury, hex chrome, PBB or PBDB that exceed
a maximum concentration value of 0.1% by weight or for cadmium exceed
0.01% by weight, per homogenous material. Homogenous material is dened as
a substance or mixture of substances with uniform composition (such as solders,
resins, plating, etc.). Lead-free solder is used for all terminations (Sn(96-96.5%),
Ag(3.0-3.5%) and Cu(0.5%)).
SVHC / REACH
To minimize the environmental impact and take more responsibility to the earth
we live, Arbor hereby conrms all products comply with the restriction of SVHC

- vii -
Preface
(Substances of Very High Concern) in (EC) 1907/2006 (REACH --Registration,
Evaluation, Authorization, and Restriction of Chemicals) regulated by the
European Union.
All substances listed in SVHC < 0.1 % by weight (1000 ppm)
Warning
Single Board Computers and their components contain very delicate
Integrated Circuits (IC). To protect the Single Board Computer and its
components against damage from static electricity, you should always follow the
following precautions when handling it :
1. Disconnect your Single Board Computer from the power source when you
want to work on the inside.
2. Hold the board by the edges and try not to touch the IC chips, leads or
circuitry.
3. Use a grounded wrist strap when handling computer components.
4. Place components on a grounded antistatic pad or on the bag that comes
with the Single Board Computer, whenever components are separated from
the system.
Replacing Lithium Battery
Incorrect replacement of the lithium battery may lead to a risk of explosion.
The lithium battery must be replaced with an identical battery or a battery type
recommended by the manufacturer.
Do not throw lithium batteries into the trash-can. It must be disposed of in
accordance with local regulations concerning special waste.
Technical Support
If you have any technical difculties, please do not hesitate to call or e-mail our
customer service.
http://www.arbor.com.tw
E-mail:[e-mail]

- viii -
Preface
Warranty
This product is warranted to be in good working order for a period of two years
from the date of purchase. Should this product fail to be in good working order
at any time during this period, we will, at our option, replace or repair it at no
additional charge except as set forth in the following terms. This warranty does
not apply to products damaged by misuse, modications, accident or disaster.
Vendor assumes no liability for any damages, lost prots, lost savings or any other
incidental or consequential damage resulting from the use, misuse of, or inability to
usethisproduct.Vendorwillnotbeliableforanyclaimmadebyanyotherrelatedparty.
Vendors disclaim all other warranties, either expressed or implied, including but
not limited to implied warranties of merchantability and tness for a
particular purpose, with respect to the hardware, the accompanying product’s
manual(s) and written materials, and any accompanying hardware. This limited
warranty gives you specic legal rights.
Return authorization must be obtained from the vendor before returned
merchandise will be accepted. Authorization can be obtained by calling or faxing
the vendor and requesting a Return Merchandise Authorization (RMA) number.
Returned goods should always be accompanied by a clear problem description.

- 1 -
1Chapter 1
Introduction
Chapter 1 - Introduction

- 2 -
Introduction
1.1. The Product
• Fanless Design
• Support Intel®Atom™ E3800 Family
• Dual Gigabit Ethernet ports
• LVDS, Analog RGB Port
• Support Dual Independent Displays
• Wide-Range Operating Temp.: -40 ~ 85°C
1.2. About this Manual
This manual is intended for experienced users and
integrators with hardware knowledge of computers. If
you are not sure about the description in this manual, consult your vendor before
further handling.
We recommend that you keep one copy of this manual for the quick reference
for any necessary maintenance in the future. Thank you for choosing ARBOR
products.

- 3 -
Introduction
1.3. Specications
System
CPU Soldered onboard Intel®Atom™ processor
E3825 dual-core 1.33GHz / E3845 quad-core 1.91GHz
Memory 1 x DDR3L SO-DIMM socket, supporting up to
8GB 1333 MT/s SDRAM
BIOS Insyde BIOS
Watchdog Timer 1 ~ 255 levels reset
I/O
I/O Chipset Fintek F81866
Serial Port 2 x RS-232
2 x RS-232/422/485 selectable
USB Port 2 x USB 2.0 ports
1 x USB 3.0 port
KB/MS 6-pin wafer connector for PS/2 keyboard and mouse via Y-cable
Expansion Bus PC/104 interface & Mini-card socket
Storage
1 x Serial ATA port with 300MB/s HDD transfer rate
1 x mSATA socket (Socket shared and BIOS
selectable with Mini PCIe card)
Ethernet Chipset 2 x Realtek RTL8111 PCIe GbE controllers
Digital I/O 8-bit programmable
Audio Realtek ALC662 5.1 Channel HD Audio CODEC,
Mic-in/Line-in/Line-out
Display
Graphics Chipset Integrated Intel®HD Graphics
Graphics Interface Analog RGB supports resolution up to 2048 x 1536
LCD: Dual Channel 24-bit LVDS
Mechanical & Environmental
Power Requirement +5V (Additional +12V might be required for LCD panel)
Power Consumption 1.81A@5V with E3825 (Typical)
2.24A@5V with E3845 (Typical)
Operating Temp. -40 ~ 85ºC (-40 ~ 185ºF)
Operating Humidity 10%~95% @ 85C (non-condensing)
Dimension (L x W) 96 x 90 mm (3.8” x 3.5”)

- 4 -
Introduction
1.4. Inside the Package
Before starting to install the single board, make sure the following items are
shipped:
1 x Em104-i230F
1 x Heat Sink
1 x Driver CD
1 x Quick Installation Guide
If any of the above items is damaged or missing, contact your vendor
immediately.
1.5. Ordering Information
Em104-i230F-E3825 Intel®Atom™ Processor E3825 PC/104 CPU module
Em104-i230F-E3845 Intel®Atom™ Processor E3845 PC/104 CPU module
1.5.1. Optional Accessories
CBK-11-230F-00
Cable kit
1 x SATA cable
1 x Audio cable
4 x COM port cables
1 x KB & MS Y-cable
1 x USB cable
1 x VGA cable
2 x LAN cables

- 5 -
2Chapter 2
Getting
Started
Chapter 2 - Getting Started

- 6 -
Getting Started
2.1. Board Dimensions
5.08
0
90.81
95.89
5.08
0
90.81
5.08
Unit:mm
0
85.09
90.17
8.89
0
82.55
1.6
øø3.2x4pcs
(23.1)
(6.7)

- 7 -
Getting Started
2.2. Block Diagram
1 x eDP port Dual Channels 24-bit LVDS
NXP
PTN3460
LVDS1
F-13-30DP-1.25V
Analog RGB VGA1
1x13-pin headers
LPC IF
SATA1
SATA connector
SATA1
GbE
2 x PCIe x 1
Realtek RTL8111
LAN controller
DDR3L-1333MHz (up to 8GB) 1 x DDR3L
SO-DIMM socket
PWR1
+5 DC-in
USB1
2x5-pin 2.00mm pitch
latching box header
Intel®
Atom
E3825 DC
1.33GHz/
E3845 QC
1.91GHz
Processor
2 x USB 2.0 ports
ISA
FINTEK
F85226AD
LAN1,LAN2
2x5-pin 2.00mm pitch
latching box header
HD Link
HD CODEC
ALC662
Mic-in/Line-in/Line-out
AUDIO1
2x5-pin 2.00mm pitch
latching box header
1 x USB 2.0/3.0 port
USB3
Type A conn.
COM3,4 (RS-232)
COM3,4
1x9-pin 1.25mm pitch
latching box header
COM1,2
(RS-232
/422/485 selectable )
COM1,2
1x9-pin 1.25mm pitch
latching box header
KB, MS KBMS1
ACES, 88462-06
Super IO
Fintek
81866 8-bit Digital I/O DIO1
2x5-pin 2.00mm pitch
latching box header
SATA0
ASM1456B PCIe x 1
1 x USB 2.0 ports
LPC
PC-104 socket
CON3
Full-size
Mini-Card socket

- 8 -
Getting Started
2.3. Jumpers and Connectors
The board comes with some connectors to join some devices and also some
jumpers to alter the hardware conguration. The following in this chapter will
explicate each of these components one-by-one.
2.3.1. Layout
This section will provide an overview of this board, both the top and bottom sides.
Jumpers Location
JINV1
JLVCD1
JBAT1
❹
JPIC1
1
5
1
1
2
5
6
1
1
1
1
1
1
1
1
1
2 10
1
2
9
10
1
2
9
10
1
2
9
10
1
2
9
10
230
29
1
135
A
C
E
BJBH
5352
7
1
1
1
C0 D0
C19 D19
B32 A32
B1 A1
1
5
X1 X2
95
41
❷
❶❸

- 9 -
Getting Started
Connectors Location
⑳
CON3
1
5
1
1
2
5
6
1
1
1
1
1
1
1
1
1
2 10
1
2
9
10
1
2
9
10
1
2
9
10
1
2
9
10
230
29
1
135
A
C
E
BJBH
5352
7
1
1
1
C0 D0
C19 D19
B32 A32
B1 A1
1
5
X1 X2
95
41
①
② ⑥
⑦
⑧
⑨
⑩
④
③ ⑤
⑪
⑫
⑬
⑭
⑮
⑯
⑰
⑱
⑲
USB1
LAN1LAN2
USB2
AUDIO1 VGA1
DIO1
KBMS1
CON1
COM1
COM2
COM3
COM4
JFRT1
SATA1LVDS1INV1PWR1
FAN1

- 10 -
Getting Started
2.3.2. Jumpers
❶JINV1
Function: Sets LCD inverter voltage. (This jumper sets the voltage of LCD
connector INV1, which means this jumper decides the pin 1 of the
LCD connector INV1.)
Jumper Type: 2.00mm pitch, 1x3-pin header
Setting: Pin Description
1-2 +12V
2 13
2-3 +5V (default)
2 13
Board Top
JINV1
JLVCD1
JBAT1
❹
JPIC1
1
5
1
1
2
5
6
1
1
1
1
1
1
1
1
1
2 10
1
2
9
10
1
2
9
10
1
2
9
10
1
2
9
10
230
29
1
135
A
C
E
BJBH
5352
7
1
1
1
C0 D0
C19 D19
B32 A32
B1 A1
1
5
X1 X2
95
41
❷
❶❸