Arbor Technology Qseven EmQ-i2205 User manual

I
EmQ-i2205
Qseven®CPU Module
User’s Manual
Version 1.0
2017.08

- II -
This page is intentionally left blank.

- i -
Revision History
Version Release Time Description
1.0 2017.08 Initial release

- ii -
Contents
Revision History .................................................................................i
Contents.............................................................................................ii
Preface...............................................................................................iv
Copyright Notice .................................................................................... iv
Declaration of Conformity ...................................................................... iv
CE................................................................................................... iv
FCC Class B .................................................................................... v
RoHS ............................................................................................... v
SVHC / REACH .............................................................................. vi
Warning.................................................................................................. vi
Replacing the Lithium Battery ................................................................ vi
Technical Support .................................................................................. vi
Warranty.................................................................................................vii
Chapter 1 - Introduction....................................................................1
1.1. The Product .....................................................................................2
1.2. About this Manual ............................................................................2
1.3. Specications................................................................................... 3
1.4. Inside the Package ..........................................................................4
1.5. Ordering Information ........................................................................4
1.6. Driver Installation Note.....................................................................5
Chapter 2 - Board Overview .............................................................7
2.1. Board Dimensions............................................................................8
2.2. Block Diagram..................................................................................9
2.3. Connector Pin Denition ................................................................10
Chapter 3 - BIOS..............................................................................13
3.1 Main ...............................................................................................15
3.2 Advanced .......................................................................................17
3.2.1 ACPI Settings.......................................................................18
3.2.2 F81866 Super IO Conguration........................................... 19
3.2.3 Hardware Monitor .................................................................20
3.2.4 S5 RTC Wake Settings ......................................................... 21
3.2.5 CPU Conguration............................................................... 23
3.2.6 PPM Conguration............................................................... 24
3.2.7 SATA Conguration...............................................................25
3.2.8 LPSS & SCC Conguration ................................................26
3.2.9 CSM Conguration ...............................................................27
3.2.10 SDIO Conguration............................................................29
Contents

- iii -
Contents
3.2.11 USB Conguration ............................................................. 30
3.3 Chipset........................................................................................... 32
3.3.1 North Bridge..........................................................................33
3.3.2 South Bridge .........................................................................35
3.4 Security ..........................................................................................37
3.5 Boot.................................................................................................38
Appendices ......................................................................................41
Appendix A. I/O Port Address Map ......................................................42
Appendix B. Interrupt Request Lines (IRQ) ..........................................44
Appendix C. BIOS Memory Map........................................................... 45
Appendix D: Watchdog Timer (WDT) Setting.......................................47

- iv -
Preface
Copyright Notice
All Rights Reserved.
The information in this document is subject to change without prior notice in
order to improve the reliability, design and function. It does not represent a
commitment on the part of the manufacturer.
Under no circumstances will the manufacturer be liable for any direct, indirect,
special, incidental, or consequential damages arising from the use or inability
to use the product or documentation, even if advised of the possibility of such
damages.
This document contains proprietary information protected by copyright. All rights
are reserved. No part of this manual may be reproduced by any mechanical,
electronic, or other means in any form without prior written permission of the
manufacturer.
Declaration of Conformity
CE
The CE symbol on your product indicates that it is in compliance with the
directives of the Union European (EU). A Certicate of Compliance is available
by contacting Technical Support.
This product has passed the CE test for environmental specications when
shielded cables are used for external wiring. We recommend the use of shielded
cables. This kind of cable is available from ARBOR. Please contact your local
supplier for ordering information.
This product has passed the CE test for environmental specications. Test
conditions for passing included the equipment being operated within an
industrial enclosure. In order to protect the product from being damaged by ESD
(Electrostatic Discharge) and EMI leakage, we strongly recommend the use of
CE-compliant industrial enclosure products.
Warning
This is a class A product. In a domestic environment this product may cause
radio interference in which case the user may be required to take adequate
measures.
Preface

- v -
Preface
FCC Class B
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1)This device may not cause harmful interference, and
(2)This device must accept any interference received, including interference that
may cause undesired operation.
NOTE:
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the
interference at his own expense.
RoHS
ARBOR Technology Corp. certies that all components in its products are in
compliance and conform to the European Union’s Restriction of Use of Haz-
ardous Substances in Electrical and Electronic Equipment (RoHS) Directive
2002/95/EC.
The above mentioned directive was published on 2/13/2003. The main pur-
pose of the directive is to prohibit the use of lead, mercury, cadmium, hexava-
lent chromium, polybrominated biphenyls (PBB), and polybrominated diphenyl
ethers (PBDE) in electrical and electronic products. Member states of the EU
are to enforce by 7/1/2006.
ARBOR Technology Corp. hereby states that the listed products do not contain
unintentional additions of lead, mercury, hex chrome, PBB or PBDB that ex-
ceed a maximum concentration value of 0.1% by weight or for cadmium exceed
0.01% by weight, per homogenous material. Homogenous material is dened
as a substance or mixture of substances with uniform composition (such as sol-
ders, resins, plating, etc.). Lead-free solder is used for all terminations (Sn(96-
96.5%), Ag(3.0-3.5%) and Cu(0.5%)).

- vi -
Preface
SVHC / REACH
To minimize the environmental impact and take more responsibility to the earth
we live, Arbor hereby conrms all products comply with the restriction of SVHC
(Substances of Very High Concern) in (EC) 1907/2006 (REACH --Registration,
Evaluation, Authorization, and Restriction of Chemicals) regulated by the
European Union.
All substances listed in SVHC < 0.1 % by weight (1000 ppm)
Warning
Single Board Computers and their components contain very delicate
Integrated Circuits (IC). To protect the Single Board Computer and its
components against damage from static electricity, you should always follow the
following precautions when handling it:
1. Disconnect your Single Board Computer from the power source when you
want to work on the inside.
2. Hold the board by the edges and try not to touch the IC chips, leads or
circuitry.
3. Use a grounded wrist strap when handling computer components.
4. Place components on a grounded antistatic pad or on the bag that comes
with the Single Board Computer, whenever components are separated from
the system.
Replacing the Lithium Battery
Incorrect replacement of the lithium battery may lead to a risk of explosion.
The lithium battery must be replaced with an identical battery or a battery type
recommended by the manufacturer.
Do not throw lithium batteries into the trash-can. It must be disposed of in
accordance with local regulations concerning special waste.
Technical Support
If you have any technical difculties, please do not hesitate to call or e-mail our
customer service.
http://www.arbor-technology.com
E-mail:[e-mail]

- vii -
Preface
Warranty
This product is warranted to be in good working order for a period of two years
from the date of purchase. Should this product fail to be in good working order
at any time during this period, we will, at our option, replace or repair it at no
additional charge except as set forth in the following terms. This warranty does
not apply to products damaged by misuse, modications, accident or disaster.
Vendor assumes no liability for any damages, lost prots, lost savings or any other
incidental or consequential damage resulting from the use, misuse of, or inability to
usethisproduct.Vendorwillnotbeliableforanyclaimmadebyanyotherrelatedparty.
Vendors disclaim all other warranties, either expressed or implied, including but
not limited to implied warranties of merchantability and tness for a
particular purpose, with respect to the hardware, the accompanying product’s
manual(s) and written materials, and any accompanying hardware. This limited
warranty gives you specic legal rights.
Return authorization must be obtained from the vendor before returned
merchandise will be accepted. Authorization can be obtained by calling or faxing
the vendor and requesting a Return Merchandise Authorization (RMA) number.
Returned goods should always be accompanied by a clear problem description.

- viii -
This page is intentionally left blank.

- 1 -
1Chapter 1
Introduction
Chapter 1 - Introduction

- 2 -
Introduction
1.1. The Product
• Fanless Design
• Soldered Onboard Intel®Celeron N3000 family SoC processor
• Integrated Gigabit Ethernet
• 2 x DisplayPorts / 2 x eDP port
• Extended Operating Temp.: -20 ~ 70ºC
1.2. About this Manual
This manual is intended for experienced users and integrators with hardware
knowledge of computers. If you are not sure about the description in this manual,
consult your vendor before further handling.
We recommend that you keep one copy of this manual for the quick reference
for any necessary maintenance in the future. Thank you for choosing ARBOR
products.

- 3 -
Introduction
1.3. Specications
Form Factor Qseven®CPU Module
Processor Soldered onboard Intel® Celeron N3060 2.48GHz
processor/N3160 2.24GHz processor
Memory Soldered onboard 2GB DDR3L SDRAM, upgradable to
4GB
BIOS AMI BIOS
Serial Port 1 x UART port(TX/RX only)
USB 2.0 4 x USB 2.0 ports
2 x USB3.0 SuperSpeed ports
Serial ATA 2 x Serial ATA ports with 600MB/s HDD transfer rate
Expansion 3 x PCIex1, I2C, SDIO
Ethernet Chipset 1 x Intel® i210AT PCIe GbE controller
Audio HD Link
Graphics Chipset Integrated Intel® HD Graphic 400
Graphics Interface 2 x DisplayPorts / 1 x eDP port
OS Support Windows 8.1 64-bit
Linux: Ubuntu
Power Requirement DC 5V
Power Consumption 2.0A@5V with N3060
Operating Temp. -20 ~ 70°C (-4 ~ 158°F)
Operating Humidity 10 ~ 95% @ 70°C (non-condensing)
Dimension (L x W) 70 x 70 mm (2.76” x 2.76”)

- 4 -
Introduction
1.4. Inside the Package
Before starting with the installation, make sure the following items are shipped.
If any of the items is missing or appears damaged, contact your local dealer or
distributor.
1 x EmQ-i2205 Qseven®CPU Module
1 x Driver CD
1 x Quick Installation Guide
1.5. Ordering Information
EmQ-i2205-N3060-2G Intel®Celeron N3060 Qseven® R2.0 CPU Module w/2GB
memory soldered on module
EmQ-i2205-N3160-4G Intel®Celeron N3160 Qseven® R2.0 CPU Module w/4GB
memory soldered on module
Optional Accessories
HS-2200-F1 Heat spreader,70x65x8mm
PBQ-3001 Qseven R2.0 w/ EPIC form factor Carrier Board
CBK-04-3001-00
Cable kit
2 x COM Cables
1 x SATA Cable
1 x SATA Power Cable

- 5 -
Introduction
1.6. Driver Installation Note
The CPU board supports Windows 8.1. Find the necessary drivers on the CD
that comes with your purchase. For different OS, the driver/utility installation may
vary slightly, but generally they are similar.
Find the drivers on CD by the following paths:
Windows 8.1 64-bit
Driver Path
Audio \i220x\Audio
Chipset \i220x\Chipset\Chipset_10.1.1.11_Public
Ethernet \i220x\Ethernet
Graphics \i220x\Graphic\IntelR Graphics Driver Production Version
15.40.14.64.4352
USB3.0 \i220x\USB3.0\win8.1\Intel(R) USB 3.0 eXtensible PV 1.0.0.42
Serial IO \i220x\Serial IO\win8.1 64bit\SerialIO_BSW_x64
TXE \i220X\TXE\win8.1\Installers

- 6 -
This page is intentionally left blank.

- 7 -
2Chapter 2
Board
Overview
Chapter 2 - Board Overview

- 8 -
Board Overview
2.1. Board Dimensions
54
70
ø2,7
2,5
59,9
18
32,26
52
70
36,6
3
67
Unit:mm
1,2

- 9 -
Board Overview
2.2. Block Diagram
3 x PCIex1
LPC I/F
HD Audio Link
I2C, SMBus
SATA0, 1
1 x UART port（TX/RX only）
1 x PCIe x 1 GbE LAN
Giga LAN
Intel i210AT
DDR3L-1600 MHz , up to 8GB Onboard DDR3L
2/ 4GB SDRAM
1 x DP port
1 x eDP port
2 x USB SS ports
Q7 Golden Finger
Intel®
Celeron
N3060
2.48GHz/
N3160
2.24GHz
(Braswell)
4 x USB 2.0 ports
1 x DP port
SDIO

- 10 -
Board Overview
2.3. Connector Pin Denition
Pin Signal Pin Signal
1GND 2GND
3GBE_MDI3- 4GBE_MDI2-
5GBE_MDI3+ 6GBE_MDI2+
7GBE_LINK100# 8GBE_LINK1000#
9GBE_MDI1- 10 GBE_MDI0-
11 GBE_MDI1+ 12 GBE_MDI0+
13 LED_LINK# 14 GBE_ACT#
15 (N/C) 16 SLP_S4#
17 WAKE# 18 SLP_S3#
19 SUS_STAT# 20 PWR_BTN#
21 SLEEP# 22 LID#
23 GND 24 GND
KEY KEY
25 GND 26 PWRGD
27 BATLOW# 28 RSTBTN#
29 SATA0_TX+ 30 SATA1_TX+
31 SATA0_TX- 32 SATA1_TX-
33 HDD_ACT# 34 GND
35 SATA0_RX+ 36 SATA1_RX+
37 SATA0_RX- 38 SATA1_RX-
39 GND 40 GND
41 BIOS_DISABLE# 42 SD_CLK#
43 SD_CD# 44 SD_LED (N/C)
45 SD_CMD 46 SD_WP
47 SD_PWR# 48 SD_DAT1
49 SD_DAT0 50 SD_DAT3
51 SD_DAT2 52 SD_DAT5 (N/C)
53 SD_DAT4 (N/C) 54 SD_DAT7 (N/C)
55 SD_DAT6 (N/C) 56 RSVD (N/C)
57 GND 58 GND
59 AZ_SYNC 60 SMB_CLK
61 AZ_RST# 62 SMB_DAT
63 AZ_BIT_CLK 64
SMB_ALERT#
Pin Signal Pin Signal
65 AZ_SDATA_IN0 66 SMB_CLK
67 AZ_SDATA_OUT 68 SMB_DAT
69 THRM# 70 WDTRIG#
71 THRMTRIP# 72 WDOUT
73 GND 74 GND
75 USB_SSTX0- 76 USB_SSRX0-
77 USB_SSTX0+ 78 USB_SSRX0-
79 USB_6_7_OC#
(N/C) 80 USB_4_5_ OC#(N/C)
81 USB_SSTX1- 82 USB_SSRX1-
83 USB_SSTX1+ 84 USB_SSRX1+
85 USB_-OC2/3 86 USB_-OC0/1
87 USB_P3- 88 USB_P2-
89 USB_P3+ 90 USB_P2+
91 USB_CC (N/C) 92
USB_ID
93 USB_P1- 94 USB_P0-
95 USB_P1+ 96 USB_P0+
97 GND 98 GND
99 eDP_DDI0_TX0+ 100 eDP_DDI1_TX0+
101 eDP_DDI0_TX0- 102 eDP_DDI1_TX0-
103 eDP_DDI0_TX1+ 104 eDP_DDI1_TX1+
105 eDP_DDI0_TX1- 106 eDP_DDI1_TX1-
107 eDP_DDI0_TX2+ 108 eDP_DDI1_TX2+
109 eDP_DDI0_TX2- 110 eDP_DDI1_TX2-
111 LVDS_VDDEN 112 BLKTEN
113 eDP_DDI0_TX3+ 114 eDP_DDI1_TX3+
115 eDP_DDI0_TX3- 116 eDP_DDI1_TX3-
117 GND 118 GND
119 eDP_DDI0_AUX+ 120 eDP_DDI1_AUX
+
121 eDP_DDI0_AUX- 122 eDP_DDI1_AUX -
123 LCD_BKLT_CTRL 124 GP_1-Wire_Bus
(N/C)
125 eDP_DDI0_DDCDATA 126 eDP0_HPDET#
127 eDP_DDI0_DDCCLK 128 eDP1_HPDET#
129 CAN0_TX (N/C) 130 CAN0_RX (N/C)