Arbor Technology LYNC-712-4200G4 Series User manual

I
LYNC-712/715-4200G4
Series
Fanless 12.1”/15” Industrial Panel PC with
Intel®N4200 Quad-Core™ Processor
User’s Manual
Version 1.0
2018.05
P/N: 4012071004100P

- II -
Revision History
Version Time Description
1.0 2018.05 Initial release

- i -
Contents
Revision History ................................................................................II
Contents..............................................................................................i
Preface...............................................................................................iii
Copyright Notice .....................................................................................iii
Declaration of Conformity .......................................................................iii
CE....................................................................................................iii
FCC Class A ....................................................................................iii
RoHS .............................................................................................. iv
SVHC / REACH .............................................................................. iv
Important Safety Instructions .................................................................. v
Warning.................................................................................................. vi
Lithium Battery Replacement................................................................. vi
Technical Support .................................................................................. vi
Warranty.................................................................................................vii
Chapter 1 - Introduction....................................................................1
1.1. The Computer .................................................................................. 2
1.2. About this Manual ...........................................................................2
1.3. Specications................................................................................... 3
1.4. Inside the Package ..........................................................................5
1.5. Ordering Information ........................................................................ 5
1.5.1. Optional Accessories .............................................................6
1.5.2. Congure-to-Order Service.................................................... 6
Chapter 2 - Getting Started...............................................................7
2.1. Dimensions ...................................................................................... 8
2.2. Tour the Computer ...........................................................................9
2.2.1. Front View.............................................................................. 9
2.2.2. Rear View ............................................................................10
2.2.3. Bottom View......................................................................... 10
2.2.4. Top View .............................................................................. 11
2.3. Driver Installation .......................................................................... 11
Chapter 3 - Engine of the Computer..............................................13
3.1. Board Layout..................................................................................14
3.1.1. CPU Module (EmQ-i2401)................................................... 14
3.1.2. Daughterboard (SCDB-141B, optional) ...............................14
3.1.3. Carrier Board (PBQ-9014) ................................................... 15
3.2. Jumpers and Connectors............................................................... 16
3.2.1. Jumpers ..............................................................................16
3.2.2. Connectors .......................................................................... 20
Chapter 4 - Installation and Maintenance......................................27
Contents

- ii -
Contents
4.1. Use Onboard Jumpers and Connectors ........................................28
4.2. Install Hardware ............................................................................. 29
4.2.1. Install SSD or HDD .............................................................. 29
4.2.2. Install CFast Card ................................................................ 30
4.2.3. Install Wi-Fi Module .............................................................31
4.3. Mount the Computer ......................................................................32
4.3.1. Panel Mounting.................................................................... 32
4.3.2. VESA Mounting....................................................................33
4.4. Wire DC-Input Power Source......................................................... 36
Chapter 5 - BIOS..............................................................................37
5.1. Main ............................................................................................... 40
5.2. Advanced .......................................................................................41
5.2.1. F81866 Super IO Conguration........................................... 42
5.2.2. Hardware Monitor ................................................................44
5.2.3. CPU Conguration............................................................... 45
5.2.4. CSM Conguration ..............................................................45
5.2.5. USB Conguration ............................................................... 46
5.3. Chipset........................................................................................... 47
5.3.1 LCD Control .......................................................................... 48
5.3.2 HD-Audio Conguration........................................................ 48
5.3.3 PCI Express Conguration ...................................................48
5.3.4 SATA Drives..........................................................................49
5.3.5 USB Conguration ................................................................ 49
5.4. Security .......................................................................................... 50
5.5. Boot................................................................................................51
5.6. Exit ................................................................................................. 52
Appendices ......................................................................................53
Appendix A: WIFI-AT4550 Hardware Installation..................................54
A.1. Install WIFI-AT4550................................................................ 54
Appendix B: PenMount Utilities............................................................. 58
B.1. PenMount Control Panel ........................................................58
B.2. PenMount Gesture .................................................................63

- iii -
Preface
Copyright Notice
All Rights Reserved.
The information in this document is subject to change without prior notice in
order to improve the reliability, design and function. It does not represent a
commitment on the part of the manufacturer.
Under no circumstances will the manufacturer be liable for any direct, indirect,
special, incidental, or consequential damages arising from the use or inability
to use the product or documentation, even if advised of the possibility of such
damages.
This document contains proprietary information protected by copyright. All rights
are reserved. No part of this document may be reproduced by any mechanical,
electronic, or other means in any form without prior written permission of the
manufacturer.
Declaration of Conformity
CE
The CE symbol on your product indicates that it is in compliance with the
directives of the Union European (EU). A Certicate of Compliance is available
by contacting Technical Support.
This product has passed the CE test for environmental specications when
shielded cables are used for external wiring. We recommend the use of shielded
cables. This kind of cable is available from ARBOR. Please contact your local
supplier for ordering information.
Warning
This is a class A product. In a domestic environment this product may cause
radio interference in which case the user may be required to take adequate
measures.
FCC Class A
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.

- iv -
Preface
NOTE:
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the
interference at his own expense.
RoHS
ARBOR Technology Corp. certies that all components in its products are
in compliance and conform to the European Union’s Restriction of Use of
Hazardous Substances in Electrical and Electronic Equipment (RoHS) Directive
2002/95/EC.
The above mentioned directive was published on 2/13/2003. The main purpose
of the directive is to prohibit the use of lead, mercury, cadmium, hexavalent
chromium, polybrominated biphenyls (PBB), and polybrominated diphenyl
ethers (PBDE) in electrical and electronic products. Member states of the EU are
to enforce by 7/1/2006.
ARBOR Technology Corp. hereby states that the listed products do not contain
unintentional additions of lead, mercury, hex chrome, PBB or PBDB that exceed
a maximum concentration value of 0.1% by weight or for cadmium exceed
0.01% by weight, per homogenous material. Homogenous material is dened as
a substance or mixture of substances with uniform composition (such as solders,
resins, plating, etc.). Lead-free solder is used for all terminations (Sn(96-96.5%),
Ag(3.0-3.5%) and Cu(0.5%)).
SVHC / REACH
To minimize the environmental impact and take more responsibility to the earth
we live, Arbor hereby conrms all products comply with the restriction of SVHC
(Substances of Very High Concern) in (EC) 1907/2006 (REACH --Registration,
Evaluation, Authorization, and Restriction of Chemicals) regulated by the
European Union.
All substances listed in SVHC < 0.1 % by weight (1000 ppm)

- v -
Preface
Important Safety Instructions
Read these safety instructions carefully
1. Read all cautions and warnings on the equipment.
2. Place this equipment on a reliable surface when installing. Dropping it or
letting it fall may cause damage
3. Make sure the correct voltage is connected to the equipment.
4. For pluggable equipment, the socket outlet should be near the equipment
and should be easily accessible.
5. Keep this equipment away from humidity.
6. The openings on the enclosure are for air convection and protect the
equipment from overheating. DO NOT COVER THE OPENINGS.
7. Position the power cord so that people cannot step on it. Do not place
anything over the power cord.
8. Never pour any liquid into opening. This may cause re or electrical shock.
9. Never open the equipment. For safety reasons, the equipment should be
opened only by qualied service personnel.
10. If one of the following situations arises, get the equipment checked by
service personnel:
a. The power cord or plug is damaged.
b. Liquid has penetrated into the equipment.
c. The equipment has been exposed to moisture.
d. The equipment does not work well, or you cannot get it to work according
to the user’s manual.
e. The equipment has been dropped or damaged.
f. The equipment has obvious signs of breakage.
11. Keep this User’s Manual for later reference.

- vi -
Preface
Warning
The Panel PC and its components contain very delicately Integrated Circuits
(IC). To protect the Panel PC and its components against damage caused by
static electricity, you should always follow the precautions below when handling
it:
1. Disconnect your Panel PC from the power source when you want to work
on the inside.
2. Use a grounded wrist strap when handling computer components.
3. Place components on a grounded antistatic pad or on the bag that came
with the Panel PC, whenever components are separated from the system.
Lithium Battery Replacement
Incorrect replacement of the lithium battery may lead to a risk of explosion.
The lithium battery must be replaced with an identical battery or a battery type
recommended by the manufacturer.
Do not throw lithium batteries into the trash can. It must be disposed of in
accordance with local regulations concerning special waste.
Technical Support
If you have any technical difculties, please consult the user’s manual rst at:
ftp://ftp.arbor.com.tw/pub/manual
Please do not hesitate to call or e-mail our customer service when you still cannot
nd out the answer.
http://www.arbor-technology.com

- vii -
Preface
Warranty
This product is warranted to be in good working order for a period of one year
from the date of purchase. Should this product fail to be in good working order
at any time during this period, we will, at our option, replace or repair it at no
additional charge except as set forth in the following terms. This warranty does
not apply to products damaged by misuse, modications, accident or disaster.
Vendor assumes no liability for any damages, lost prots, lost savings or any
other incidental or consequential damage resulting from the use, misuse of, or
inability to use this product. Vendor will not be liable for any claim made by any
other related party.
Vendors disclaim all other warranties, either expressed or implied, including but
not limited to implied warranties of merchantability and tness for a particular
purpose, with respect to the hardware, the accompanying product’s manual(s)
and written materials, and any accompanying hardware. This limited warranty
gives you specic legal rights.
Return authorization must be obtained from the vendor before returned
merchandise will be accepted. Authorization can be obtained by calling or faxing
the vendor and requesting a Return Merchandise Authorization (RMA) number.
Returned goods should always be accompanied by a clear problem description.

- viii -
This page is intentionally left blank.

- 1 -
1Chapter 1
Introduction
Chapter 1 - Introduction

- 2 -
Introduction
1.1. The Computer
ARBOR’s LYNC-712 & 715-4200G4 is cost-effective
industrial panel PC featuring light weight and slim form
factor. The computer comes with rich I/O to meet the
demand of the automation and manufacturing process
required in modern factories. The system includes four
serial ports, ve USB ports, one DVI port and two LAN
ports. The computer also supports one CFast card and
features one 2.5” drive bay for extensive data storage.
One PCI Express Mini-card is also built on the main
board of the computer to enhance the system with Wi-Fi
networking.
Product Highlights
• Intel®Apollo Lake-based Panel PC
• Fewer cables, fanless design
• 12.1” (LYNC-712) or 15” (LYNC-715) 1024 x 768 XGA LCD display w/ LED
backlight
• Front bezel with completely covered membrane
• Flush front panel, IP65-compliant
• Brightness control button
• Outside-accessible push-pull CFast socket
• Outside-accessible USB port with rubber cover on the front bezel
• Serial ports (RS-485), w/ auto-ow control
• 1 x MiniCard socket for WiFi module
• 2 x SMA antenna Holes for optional WiFi function
• 9~36V wide-range DC input with reverse protection
1.2. About this Manual
This manual is meant for the experienced users and integrators with hardware
knowledge of personal computers. If you are not sure about the description in
this manual, consult your vendor before further handling.
We recommend that you keep one copy of this manual for the quick reference
for any necessary maintenance in the future. Thank you for choosing ARBOR
products.

- 3 -
Introduction
1.3. Specications
System
CPU Intel®N4200 Quad-Core™ Processor 1.10GHz
Memory Soldered onboard 4GB DDR3L SDRAM
LAN 1 x Intel®i210IT GbE controller
1 x Realtek®8111E GbE controller
Watchdog Timer 1~255 levels reset
Storage
1st Device 1 x outside-accessible CFast slot
2nd Device 1 x 2.5” drive bay
Audio
Speaker 2 x 1.5W speakers (optional)
LCD Display
Size/Type 12.1" TFT LCD Panel (LYNC-712)
15” TFT LCD Panel (LYNC-715)
Max. Resolution 1024 x 768, XGA
Max. Colors 16.7M
Luminance LYNC-712: 350 cd/m², LYNC-715: 420 cd/m²
Touch Screen 5-wire Analog Resistive
View Angle (U/D/R/L) 80°/80°/80°/80°
Button & Indicator
Function Key Brightness up/down, Screen on/off
LED Indicator Power on LED
Power System
Power Input DC 9~36V
Power Consumption LYNC-712: Max. 23.37W (w/o I/O cards)
LYNC-715: Max. 23.95W (w/o I/O cards)
Qualication
Certication CE, FCC Class A

- 4 -
Introduction
Expansion
Expansion Bus 1 x Mini-card socket (Full Size)
External I/O
Serial Ports 4 x DB-9 connectors for COM1~4
(COM1 ~ COM4 are RS-232/485 congurable)
USB Ports
4 x Type-A USB 2.0 ports (rear)
1 x Type-A USB 2.0 port with rubber cover on front bezel
LAN 2 x RJ-45 GbE ports
DVI 1 x DVI-I connector (support DVI only)
WiFi 2 x SMA antenna holes for optional WiFi function
Mechanical
Mounting Type Panel Mounting and VESA-75/100 Mounting
Chassis Panel-mounting chassis, aluminum front bezel and SECC steel
chassis
Dimension
(W x H x D)
LYNC-712: 325.86 x 258.86 x 53.50 mm (12.8” x 10.2” x 2.11”)
LYNC-715: 389.93 x 309.93 x 56.96 mm (15.4” x 12.2” x 2.24”)
Weight (Net) LYNC-712: 2.4 kg (without VESA bracket)
LYNC-715: 3.6 kg (without VESA bracket)
Environmental
Operating Temp. -20 ~ 55ºC (-4 ~ 131°F)
Storage Temp. -20 ~ 70°C (-4 ~ 158°F)
Operating Humidity 10 ~ 95% RH @ 55°C (non-condensing)
Vibration 5 ~ 500Hz, 2Grms X,Y,Z axis (with CFast/SSD)
Shock Operating 20G, 11ms X,Y,Z axis (with CFast/SSD)
OS Support
Windows®10 (64bit)

- 5 -
Introduction
1.4. Inside the Package
Upon opening the package, carefully inspect the contents. If any of the items
is missing or appears damaged, contact your local dealer or distributor. The
package should contain the following items:
1 x LYNC-712 or 715-4200G4
industrial panel PC
1 x Accessory Box that contains the
following items:
• Driver CD
• User’s manual
• Screws/ Panel mount hook
• 3-pin plug for terminal block
1.5. Ordering Information
LYNC-712-4200G4 12.1” Intel®N4200 Quad-Core™ processor industrial
panel PC with 4GB Memory
LYNC-715-4200G4 15” Intel®N4200 Quad-Core™ processor industrial
panel PC with 4GB Memory

- 6 -
Introduction
1.5.1. Optional Accessories
The following items are normally optional, but some vendors may include them in
the standard package, or some vendors may not carry all the items.
PAC-
P060W-02 12V/5A 60W AC/DC power adapter kit
VMB-712 LYNC-712 VESA-mount bracket kit, w/ 75 x
75 mm & 100 x 100 mm VESA supports
VMB-715 LYNC-715 VESA-mount bracket kit, w/ 75 x
75 mm & 100 x 100 mm VESA supports
1.5.2. Congure-to-Order Service
Make the computer more tailored to your needs by selecting one or more
components from the list below to be fabricated to the computer.
150GB SSD Intel®2.5" 150GB SATAIII SSD kit
WiFi-AT4550 Atheros, QCNFA324 WiFi module w/
2*30cm internal wiring
ANT-D11 1 x WiFi Dual-band 2.4G/5G antenna
ADK-712 LYNC-71x audio kit

- 7 -
2Chapter 2
Getting Started
Chapter 2 - Getting Started

- 8 -
Getting Started
2.1. Dimensions
LYNC-712-4200G4
Unit: mm
LYNC-715-4200G4
Unit: mm

- 9 -
Getting Started
2.2. Tour the Computer
Take a look around the computer and nd the external controls and connectors.
The appearance of LYNC-712-4200G4 and LYNC-715-4200G4 are similar. This
section will use the image of LYNC-715-4200G4 as the example.
2.2.1. Front View
Type-A USB 2.0 port
with rubber cover
Function keys
Use the function keys to launch the following actions from the computer:
Icon Description
Turns on/off the LCD display.
Decreases LCD backlight.
Increases LCD backlight.

- 10 -
Getting Started
2.2.2. Rear View
speakers (optional)
VMB-712/715 (optional VESA-mount bracket kit)
2.2.3. Bottom View
The bottom side of the computer is where the computer’s I/O ports are.
②③ ④ ⑤
①⑥⑦⑧⑨
No. Description
①Power switch,
②9~36V DC In power terminal receptable
③④⑤⑥ DB-9 connectors of COM1, COM2, COM3, COM4, RS-232/485
congurable
⑦DVI port, supporting DVI-D display only
⑧2 x RJ-45 GbE ports
⑨4 x Type-A USB 2.0 ports (rear)