Argos 166/6890 User manual

OI WOW Eclipse Tall Cabinet
166/6890
Issue 1 - 10/10/13
35cm
30cm
170cm

Components - Panels
Please check you have all the panels listed below
12
4
7
11
Upper left side panel
Under left side panel
Upper right side panel
Under right side panel
Door panel
Left drawer side 12 Right drawer side
Drawer front
10
17 Corner piece x 4
15
16
14 Drawer bottom
Drawer back
13
9Shelf x 3
8
2
If you have damaged or missing components,
call the Customer Helpline:08456 400800
Upper back panel
Under back panel
5
3
6
Bottom panel
Top panel
Adjustable shelf

Components - Fittings
Please check you have all the fittings listed below
Note:The quantities below are the correct amount to complete the assembly .In some cases more
fittings may be supplied than are required.
D
A
G
JK
H
E
B C
F
I
L
N
3
8mm Bolt x 2 Runner x 2
30mm Screw x 5
Straight hinge x 2
Φ4 x 12mm Screw x 35
Metal leg x 4
Hanger Bracket x 1 Φ3 x 12mm Screw x 14
Wall plug(for solid walls only) x 1
Metal Support x 4
M
Locking Pin x 32
Pin x 4
Screw Cap x 24
Locking Nut x 40
Ruler - Use this ruler to help correctly identify the screws
Tools required
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 110 115 120 125 130 135 140 145 150 155 160 165 170
105
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150
0 1 2 3 45 6
(medium & large)
Phillips screwdriver Small
hammer
Ruler/tape
measure
Flatblade screwdriver
(medium)
6mm Suitable drill bit
(for use with wall plug)
Eye protection
(when using a
hammer or glue)
Hammer Drill
(Only for dril hole on the wall)

Assembly Instructions
Assembling under side panel
NOTE:2 peoples assembly required.
This assembly will take about 1.5
hours more or less depending on
your skills.
4
Step 1
a:
B
B
B
B
17
b:
Continued on next page
15
A
A
c:
G1
G1
B
a:
Screw locking pins into corner
pieces as shown.
17
G1G2
b:
Loosen straight hinge screw as
shown to separate it into & .
G1
c:
Use Φ4 x 12mm screws to fix
straight hinge onto door panel
．
15
A
G1
GG1
G2
3

Assembly Instructions
Step 1 - continued
5
d:
B
B
B
C
C
C
C
C
C
C
L
L
L
L
II
I
I
A
A
A
A
A
A
A
A
4
4
5
5
I
I
AFront
Front Front
Screw
C
G2
G2
17 17
B
C
C
I
A
Insert locking pins into under
side panels.
Screw pins into under side panel
and make sure shorter
part facing down, insert locking
nuts into it,tighten locking nuts
to secure.
d:
Attach corner pieces to under
side panels ,insert locking
nuts into it,tighten locking nuts
to secure.
Stretch runner as shown,use
2 pcs screw to fix it on side
panel,then stretch runner in
opposite direction,use 1 pc screw
to fix.
17
4
4
5
5
L
Use Φ4 x 12mm screw to attach
straight hinge onto under left
side panel.
A
G2
Assembling under side panel
Slide part
Fix part
Fix part
Tips: not make the
hinge in wrong way
A
G2

Assembly Instructions
Step 2
6
Step 3
Assembling under unit
back side
two screw hole
Carefully attach side panels
to bottom panel and middle
shelf ,insert locking nuts into
it ,tighten locking nuts to secure
the unit.
Assembling legs
8
8
9
9
4
4
5
5
C
C
C
C
a: b:
8
N1
N2
N3
A
A
A
AN1
N1
N1
N1
c:
d:
8
8
N2
N2
N2
N2
N3
N3
N3
N3
C
by hand
by hand
N
N1
b:
Use Φ4 x 12mm screw to fix leg
plate on bottom panel .
8
A
N
a:
Unlock metal leg by using screw
driver as shown.
N1N2
N3
c:
Screw bolt on the leg plate
by hand.
d:
Screw the leg body clockwise
Note:
Not use screwdriver to tighten for
this step,to avoid overtighten.
to lock.
C

Assembly Instructions
Assembling upper unit
Step 4
7
a:
Carefully attach upper side panels
to top panel and shelves
as shown,insert locking nuts
into it,tighten locking nuts clockwise
to secure.
1
1
2
2
9
9
9
7
7
C
b:
C
C
C
C
CC
C
C
C
B
B
B
B
B
B
B
B
12
B
Screw locking pins into upper
side panels.
a：
b：
12
17 17
back side
two screw hole
C
Attach corner pieces to upper side
panel and insert locking nuts
into it,tighten locking nuts to
secure.
C

Assembly Instructions
Step 5
8
Attach upper unit to under unit as
shown,insert locking nuts into
upper side panel and tighten
it clockwise to secure.
122
C
C
Use Φ3 x12mm screw to fix
back panel and to the unit,
please make sure the hole on upper
back panel match top panel.
3
3
6
E
Assembling back panel
Assembling the unit
Step 6
1
4
E
6
3
D
A
7
D
Use Φ4 x 12mm screw to fix
hanger bracket on top panel .
7
A

A
9
Assembly Instructions
Step 7
Assembling door panel
Step 7
15
15
15
15
15
5
H
11
10
12
13
14
C
C
B
B
J
J
a:
b:
Assembling drawer
a:
Use 30mm screw to fix drawer
side panel onto drawer back
panel .
b:
Carefully slide bottom panel
into grooves.
11
14
12
13
G1 G2
Attach door panel to the unit by
fixing onto as shown ,adjust
the door left or right ,up or down ,in
or out if needed .
G1
G1
G1
G1
G1
G
G
G
G2
G2
Step 7
Step 8
J

Assembly Instructions
Assembling drawer
Step 9
10
c:
a: b:
try if drawer stopper function well.
H
c:
Screw bolt into holes as shown,
b:
Carefully pull drawer out.
a:
Pull out the runner, alignment to
the groove on the drawer, then
insert the drawer to close first.
H
11
H
I

A
11
NOTE:If you have damaged or missing components,
call the Customer Helpline:08456 400800
Argos LTD,489-499 Avebury Boulevard,
Central Milton Keynes, MK9 2NW
Assembly Instructions
Step 8
Fixing to the wall
a:
Use screw cap to cover screws
as shown.
Insert metal support into side
panels,carefully put shelf on it.
b:
Step 10
16
16
C
M
M
Q
F
J
K
M
MM
M
MM
M
F
a:
b:
K
J
D
After above assembly, please
double check and make sure all
screws are tightened before us.
Warning!
Please make sure the unit is
secured to the wall before use.
D
Use screw and wall plug to
fix the unit on the wall via wall
bracket .
JK
Please refer to next page the Guide
for Wall Mounting & Fixings.

A Guide to - Wall Mounting & Fixings
Revision 2 - 7/10/09
Important note:
Types of walls
Care &
Maintenance
No.1 “General Purpose” wall plug
No.6 “Shield Anchor” wall plug
Heavy loads
No.3 “Cavity Fixing” wall plug
No.4 “Cavity Fixing-Heavy Duty”
wall plug
No.5 “Hammer Fixing” wall plug
No.2 “Plasterboard” wall plug
Generally aerated blocks should not
be used to support heavy loads, use
a specialist tting in this case. For light
loads, general purpose wall plugs can
be used.
For use with heavier loads such as TV
& HiFi speakers and satelite dishes etc.
For use with plasterboard partitions or
hollow wooden doors.
For use when tting or supporting
heavy loads such as shelving, wall
cabinets and coat racks.
For use with walls stuck with
plasterboard. The hammer xing allows
it to be xed to the wall rather than the
plasterboard. Always check the xing
is secure to the retaining wall.
For use when attaching light loads on
to plasterboard partitions.
Safety: Always check the fitting
and location to ensure your safety
in and around the home.
Fitting: From time to time check
the fitting to ensure the wall plugs
or screws do not become loose.
You can use one of the following types of wall plug if your walls are made
of brick, breeze block, concrete, stone or wood.
Important: When drilling into walls always
check that there are no hidden wires or pipes etc.
Hints:
1: General rule: Always use a larger screw and wall plug
if you are not sure.
2: Ensure you use the recommended drill bit to match the wall
plug and hole size.
3: Ensure you drill the hole horizontally, do not force the drill or
enlarge the hole.
4: Take extra care when drilling high walls, ceilings and ceramic
tiles. Ensure wall plugs are inserted beyond the thickness of
the ceramic tiles to avoid the tiles splitting or cracking.
5: Ensure wall plugs are well tted and are a tight t in the
drilled hole.
If plastic wall plugs
are supplied with your
product:
Make sure that the screws and wall plugs being used
are suitable for supporting your unit. Consult a qualified
tradesperson if you are unsure.
- these are only suitable for
use in masonry walls.
If you are in any doubt about
the correct wall plugs for
your wall, seek professional
advice.
Failure of the product due to
using incorrect xings is the
responsibility of the installer.