Argos 343/3980 User manual

8 X Interlocking White Shoe Storage
343/3980
Assembly Instructions - Please keep for future reference
Dimensions
Width - 81cm
Depth - 37.5cm
Height - 42cm
Important – Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline: 03456 400800
Issue 1 - 15/10/2014

1
Safety and Care Advice
Important – Please read these instructions fully before starting assembly
• Check you have all the
components and tools listed on
the following pages.
• Remove all fittings from the
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Make sure you have enough
space to layout the parts before
starting.
• During assembly do not stand
or put weight on the product,
this could cause damage.
• Assemble the item as close
to its fi nal position (in the same
room) as possible.
• Assemble on a soft level
surface to avoid damaging the
unit or your floor.
• Parts of the assembly will be
easier with 2 people.
• To reduce
the likelihood of
damaging your
product please
ensure that your
power drill is set on a low torque
setting.
• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
• From time to time check that
there are no loose screws on
this unit.
• This product should not be
discarded with household waste.
Take to your local authority
waste disposal centre.
Care and maintenance
•
Handy Hints

Components - Parts
Please check you have all the fittings listed below
2
Components - Fittings
If you have damaged or missing components,
call the Customer Helpline: 03456 400800
Rectangle PP board x 22
1
Connector x 30
3
Square PP board x 8
2
Tools required
Hammer

Assembly Instructions
Step 1
Connect Connector
with Rectangle PP Board
.
See Fig 1.
Step 2
Please refer to step 1 fig 2
to fig 5 for the rest of
cubes.
See Fig.6.
3
3
3
3
1
1
1
Connect Rectangle PP
Board along with
Square PP Board .
See Fig 2.
2
Connect Connector .
See Fig 3.
Connect Rectangle PP
Board .
See Fig 4
Connect Connector .
See Fig 5.
Finally, you made the
complete cube.
3
3
3 3
1
1
12
Fig 1.
Fig 2.
Fig 3.
Fig 5.
Fig 4.
If you need help or have damaged or missing parts, call the Customer Helpline: 03456 400800
Important Note: Please
follow the step 1 to make
one cube first and you
can easily finish the rest
of cubes.
Fig 6.