Argos Star 8053011 User manual

Star 2+2 Drw. Chest White
Dimensions
Length - 86cm
Depth - 40cm
Height - 73cm
Weight - 26,4kg
Issue 1 - 06/10/17
Important – Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline:
0045 7668 8055 or e-mail: order@flexa.dk
Assembly Instructions - Please keep for future reference 8053011

1
Safety and Care Advice
Important – Please read these instructions
fully before starting assembly
• Check you have all the
components and tools listed on
pages 2 and 3.
• Remove all fittings from the
plastic bags and separate them
into their groups.
• During assembly children
should be kept away from the
product due to possible risk of
injury.
• Make sure you have enough
space to layout the parts before
starting.
•This product is suitable for
children in the age range 3 to
adult
• Do not stand or put weight on
the product, this could cause
damage.
• Assemble the item as close
to its final position (in the same
room) as possible.
• Assemble on a soft level
surface to avoid damaging the
unit or your floor.
• Parts of the assembly will be
easier with 2 people.
• Do not use this item if any
components are missing or
damaged
• We do not
recommend the
use of power
drill/drivers for
inserting screws,
as this could
damage the unit. Only use hand
screwdrivers.
• Dispose of all packaging
carefully and responsibly.
• Assembly to be carried out by
a competent adult only.
• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
• Regularly check all fastenings
to ensure that they properly
tightened.
• This product should not be
discarded with household waste.
Take to your local authority
waste disposal centre.
• This product is suitable for
children in the age 4-12 years.
Maximum load on chest 30 kg.
Maximum load in each drawer
7 kg.
Care and maintenance

Drawer side Right x4
(35x16.7x1.3cm)
8Drawer side Left x4
(35x16.7x1.3cm)
9
Components - Parts
Please check you have all the parts listed below
2
Side panel Right x1
(65.4x36.1x1.2cm)
2Side panel Left x1
(65.4x36.1x1.2cm)
3
No. 4301-1206541-40 No. 4301-1206542-40
Cross rail x1
(74.8x6.5x1.5cm)
6
Plinth Straight x1
(74.8x5.0x1.5cm)
5
No. 12-01507482No. 12-01507484-40
No. 15-01303503 No. 15-01303504
Top x1
(86.0x40.0x1.6cm)
1
No. 4301-1608601-40
List x1
(74.8x2.5x1.5cm)
7
Drawer base x2
(34.8x33.7x0.3cm)
14 Partition x1
(36.1x21.7x1.6cm)
15
No. 12-01507483-20
No. 4309-0303482 No. 4301-1603612-40
Drawer front x2
(37.1x18.9x1.6cm)
10
Drawer back x2
(71.6x16.7x1.3cm)
Drawer back x2
(32.5x16.7x1.3cm)
11 Drawer front x2
(74.4x18.9x1.6cm)
12
No. 4301-1603713-40
No. 15-01307161
No. 15-01303251 No. 4301-1607443-40
If you have damaged or missing components,
call the Customer Helpline: 0045 7668 8055
Leg x4
(71.4x4.0x2.6cm)
4
No. 12-02607141-20
13

3
Components - Parts
Please check you have all the parts listed below
If you have damaged or missing components,
call the Customer Helpline: 0045 7668 8055
Back panel x1
(62.8x77.2x0.3cm)
16 Drawer base x2
(72.8x34.8x0.3cm)
17
No. 4309-030628 No. 4309-0307281

Please check you have all the fittings listed below
7x34mm for ø5 Minifix bolt x25
A
Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings
may be supplied than are required.
ø15x9.5mm Minifix cam x25
B
E
4.0x30mm Chipboard screw x16
C
D
Components - Fittings
F
1.6x16mm Nail square x24ø18/ø6,5x9.0mm Spacer x6
No. 4022-004
310x27x10mm Drawer slide x8
G H
8x30mm Dowel x24
No. 3930-08030
J
L
3.5x35mm Chipboard screw x19
i
ø9.5/M4x9mm Machine screw x8
Overbalance protector x2
No. 3901-35035 No. 3912-04009
No. 41-00179
K
M N
ø5.8x8mm Euro screw x12
ø4.2x9.5mm Euro screw x8 ø5.8x19mm Euro screw x10
No. 3907-58008
No. 3907-42010 No. 3907-58019
Tools required
Phillips
screwdriver
(medium)
Allen key
4mm incl.
Flatblade
screwdriver
(medium)
Small
hammer
Ruler/tape
measure
Eye protection
(when using a
hammer or glue)
No. 4033-004
44x23x23 Angle x2
No. 3940-00009
No. 4008-112
No. 3903-40030
No. 4010-027
No. 3933-15010
No. 4020-007

A
A
A
A
A
A
A
Assembly Instructions
Step 1
Insert the dowels Hinto
the holes in cross rail 6.
It may be necessary
to tap the dowels in
very gently with a small
hammer.
Attach minifix bolts Ato
top panel 1.
Attach the side panels
2and 3to the legs 4
using screws C.
Make sure the top of
the side panel is flush
with the legs and there
are no gaps between
the side panel and the
edge of the groove in
the legs.
Insert the dowels Hinto
the holes in the partition
15 .
Attach the drawer runner
Dto the partition 15 with
euro screws N.
Be aware of the front
edge! Note that the
screws must be
inserted from different
holes in the runners!
Step 3
Step 2
1
6
2
2
3
4
4
4
4
4
15
H
H
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
H
H
N
N
N
N
D
D
D
Front edge
Front edge
A
5
UP
UP
42
H
H
N
C

2
3
15
A A
N
E E
E E
E
H H
H H
E
N
N N
N N
K
K
K
K
K
K
K
K
K
K
K
K
K
KK
N
N
N
N
D D
D D
D D
D
D
D
D
D
Front edge
Front edge Front edge
Left side Right side
ForwardForward
Front edge
Front edge
Assembly Instructions
Step 4
Attach the second drawer
runner Dto the partition
15 with euro screws N.
Be aware of the front
edge! Note that the
drawer screws must be
inserted from different
holes in the runners!
Insert the dowels Hto
the holes in the side
panels 2and 3.
Attach minifix bolts Ato
the side panels 2and
3.
Attach the drawer
runners Dto the side
panels 2and 3with
euro screws K. Note
that the upper runners
need to be attached
with screws Nand
have spacers Eplaced
between the side panel
and runner.
Be aware of the front
edge!
Step 5
6
A
HE
N
N
K

Assembly Instructions
Step 6
Attach the cross rail 6
to the side panels 2
and 3with the minifix
cams B.
Attach angles Gto the
plinth 5using screws
M.
Attach plinth 5to side
panels 2and 3using
screws M.
Attach the partition 15 to
the top panel 1using
minifix cams B.
Step 8
Step 7
B
B
B
M
M
M
G
G
G
M
B
B
B
B
2
3
6
5
5
5
1
15
7
M

B
Assembly Instructions
Step 9
Attach the top 1to the
side panels 2and 3
with the minifix cams B.
Fasten the list 7to the
top panel using screws
i, placing the screws
into the marking holes in
top 1.
Don’t overtighten.
Step 10
B
B
B
7
1
3
2
8
i
i
i
i

Assembly Instructions
Step 11
Attach the back panel 16
with nails Fto the back
side of the chest.
Nail the back panel
16 to the carcass,
ensuring that there are
NO GAPS between the
top 1and the back
panel 16 . Follow the
measurements.
Measure out the
positions for the wall
attachment straps.
Drill two holes spaced
as illustrated with the
appropriate size for the
wall attachment fitting
(see next step).
Pull the two straps
through the gaps in
top plate 1.Push the
furniture against the wall
and secure the strap
under the top plate with
washer and screw.
Step 12
L
L
L
69 cm
60,5 cm
28 mm
28 mm 28 mm
28 mm
L
1
9
F
F
16