Argos 411/7023 User manual

BASIC TALLBOY CABINET
411/7023
30cm
28cm
180cm
Issue 1- 30/03/15

Safety and Care Advice
Important – Please read these instructions fully before starting assembly
Note: if required the next
page can be cut out and used
as reference throughout the
assembly. Keep this page with
these instructions for future
reference.
• Check you have all the
components and tools listed on
pages 2 and 3..
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Make sure you have enough
space to layout the parts before
starting.
• During assembly do not stand
or put weight on the product,
this could cause damage.
•Assemble the item as close
room) as possible.
•Assemble on a soft level
surface to avoid damaging the
• Parts of the assembly will be
easier with 2 people.
• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
• From time to time check that
there are no loose screws on
this unit.
•This product should not be
discarded with household waste.
Take to your local authority
waste disposal centre.
Care and maintenance
•Assemble all parts and bolts
loosely during assembly, only
once the product is complete
should you fully tighten the bolts
• Regularly check and ensure
tightend properly.
Handy Hints
• We do not
recommend the use
of power drill/drivers
for inserting screws,
as this could damage
the using. Only use hand
screwdrivers

1Top panel x 1
(30(w)cm x 28(d)cm)
5Lower right side panel x 1
(118.8(w)cm x 28(d)cm)
9 Shelf panel x 1
(27(w)cm x 26.1(d)cm)
13 Upper back panel x 1
(60.5(w)cm x 29.8(d)cm)
14 Lower back panel x 1
(115.4(w)cm x 29.8(d)cm)
10 Shelf panel x 1
(26.9(w)cm x 26.1(d)cm)
11 Door panel x 1
(82.6(w)cm x 26.5(d)cm)
12 Cross bar x 1
(27(w)cm x 4(d)cm)
6Shelf panel x 1
(30(w)cm x 28(d)cm)
7 Shelf panel x 2
(27.9(d)cm x 27(w)cm)
8 Shelf panel x 1
(27.9(d)cm x 27(w)cm)
2Upper left side panel x 1
(58.5(w)cm x 28(d)cm)
3Upper right side panel x 1
(58.5(w)cm x 28(d)cm)
4Lower left side panel x 1
(118.8(w)cm x 28(d)cm)

35mm Male camlock x 24
45mm Screw x 4
Shelf bracket x 4
16mm Screw x 1
35mm Screw x 1
Washer x 2 Rawl plug x 1
12mm Screw x 1
12mm Screw x 28 Knob x 1
Hinge x 2
12mm Screw x 10
Female camlock x 24 30mm Wooden dowel x 4
N
P Q R
20mm Sticker x 8
S
Safety strap x 1
O

Connect the male
camlock as directed in
the assembly instructions
using a screwdriver.
Push the male camlock
into the entry hole.
lnsert the female
camlock as shown in the
instructions
Note: ensure that the
Turn the female camlock
clockwise with a
arrow on the top of the
camlock points towards
the entry hole for the
male camlock.
screwdriver.
You should feel a click
when the camlock is
locked in place.
The joint is now secure.
Using Camlocks

Insert 12 x male camlock
into top panel ,
upper left side panel
upper right side panel
and shelf panel as
shown.
A1
2
3
6
Insert 12 x male camlock
into lower left side
panel and lower right
side panel as shown.
A
4
5
Fix 1 x magnetic catch
on underside of shelf
panel using 2 x 14mm
screw as shown.
8
F
H
A
A
A
A
A
A
A
1
2
3
6
8
4
5
F
H

Attach shelf panel to
upper right side panel
using 2 x female camlock
as shown.
Tighten female camlocks
with a screwdriver.
Please refer to the “Using
Camlocks” section at the
front of this instruction for
further assistance.
B
7
3
Attach upper left side
panel to shelf panel
using 2 x female
camlock as shown.
Tighten female camlocks
with a screwdriver.
B
2
7
Attach top panel to
the upper left side panel
and the upper right
side panel using 4 x
female camlock as
shown.
Tighten female camlocks
with a screwdriver.
Attach shelf panel
to the the upper left side
panel and the upper
right side panel
using 4 x 45mm screw
as shown.
B
D
2
2
3
6
3
1
3
7
2
1
6
B
B
B
D

B
Attach shelf panel ,
shelf panel and shelf
panel to lower right
side panel using
6 x female camlock
as shown.
Tighten female camlocks
with a screwdriver.
Insert 2 x wooden dowel
into cross bar and
attach it to the lower right
side panel as shown.
C
7
8
12
5
5
9
Insert 2 x wooden dowel
into cross bar as
shown.
Attach lower left side
panel to the assembled
part using 6 x female
camlock as shown.
Tighten female camlocks
with a screwdriver.
C
B
12
4
7
8
5
7
4
9
8
B
C
C
B
12

9
10
Connect the assembled
upper part to the
assembled lower part
using 4 x female camlock
as shown.
Tighten female camlocks
with a screwdriver.
B
Attach upper back panel
and lower back panel
to the assembled
part using 28 x 12mm
screw as shown.
K
13
14
B
K
13
14

Insert 4 x shelf bracket
into inside of the lower
left side panel and the
lower right side panel
then put shelf panel
on them as shown.
Gently tighten the upper
and the lower 8 x female
camlocks and paste 8 x
20mm sticker over the
holes of them as shown.
5
10
4
J
11
S
10
J
S
S