Argos Abigail 3 User manual

Abigail 3’ Day Bed
Assembly Instructions - Please keep for future reference
Important - Please read these instructions fully before starting assembly
Dimensions
Width - 204cm
Depth - 96cm
Height - 95cm
If you need or have damaged or missing parts, call the Customer Helpline:01799 513466
659/4778
Issue 1 - 21/11/09

1
Safety and Care Advice
Check you have all the
components and tools listed on
pages 2 and 3.
-
Please read these instructions fully before starting assembly
Important
Clean using a damp cloth or a
proprietary domestic furniture
polish. Do not use abrasive
cleaners.
This product should not be
discarded
with household waste.
Take to your local authority waste
disposal only.
Care and maintenance
From time to time check that
there are no loose screws on
this unit.
Remove all fittings from the
plastic bags and separate them
into their groups.
Keep children and animals
away from the work area, small
parts could choke if swallowed.
Whilst it is not recommended
this bed is used by children
below the age of 6. Due to the
risk of head and limb
entrapment, children above this
age should be reminded of the
dangers.
Make sure you have enough
space to layout the parts before
starting.
Assemble the item as close
to its final position (in the same
room) as possible.
Dispose of all packaging
carefully and responsibly.
Place the product on flat and
steady surface during use.
Assemble on a soft level
surface to avoid damaging the
unit or your floor.
Keep these instructions for
future use.
To ensure an easier assembly,
we strongly advise that all
fittings are only finger tightened
during initial assembly. Only
upon completion of the
assembly should all fixing points
be fully tightened.
Parts of the assembly will be
easier with 2 people.

Please check you have all the parts listed below
Components - Parts
2
1Back panel (193 x 42 cm) 2Right hand panel (93 x 87 cm)
3Side rail x 2 (194 x 10 cm) 4Left hand panel (93 x 87 cm)
5Slat x 12 (91.3 x 1.9 cm)

Please check you have all the fittings listed below
Components - Fittings
3
If you have damaged or missing components,
call the Customer Helpline: 01799 513466
Note: The quantities below are the correct amount to complete the assembly. In some cases more
fittings may be supplied than are required.
A
L
BC
DE
GH
K
F
J
M
Finial x 4 Finial base x 4 M6 50mm stud x 4
M6 55mm Allen screw x 6 M6 25mm Allen Screw x 8 Large plain washer x 24
Small plain washer x 32 Rubber washer x 8 Spring washer x 8
Nut x 24 M6 18mm Allen screw x 24 Allen key x 2

Attaching bed frame
Two people will be needed
here.
a: With help, assemble
back panel in between
left and right hand side
frames and using
fixings .
b: Assemble side rails
in between side frames.
Secure using fixings ,
, and .
Note: Do not fully tighten
the fixings!
Assembly Instructions
Step 1
Attaching slats
Assemble slats to side
rails using fixings ,
, and .
Fully tighten all fixings
from previous steps.
Step 2
4
1
4
2
3
3
3
4
a:
b:
HGJE
HGJE
D
D
E
G H J
5
F
GL
L
G
F
K
5
5
L
G
F
K
1
24
D
3
3
K
3
D
D
D
D

Attaching finials
Screw studs into the
tops of side frames and
.
Locate finial bases over
the studs.
Screw finials onto the
studs.
Assembly Instructions
Step 3
If you need help for have damaged or missing parts, call the Customer helpline:01799 513466
Justwise Group Ltd., 6 The Shires. Shire Hill Industrial Estate. Saffron Walden. Essex. CB11 3AP
C
B
A
C
B
A
C
B
A
Assembly is complete.
2
4
2
4
4

Important - Please read these instructions fully before starting assembly
Dimensions
Issue 2 - 16/05/11
Width - 203.5cm
Depth - 96cm
Height - 95cm
Abigail 3' Day Bed
Assembly Instructions - Please keep for future reference 659/4778
If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800
695/5221

1
Safety and Care Advice
Check you have all the
components and tools listed on
pages 2 and 3.
-
Please read these instructions fully before starting assembly
Important
Clean using a damp cloth or a
proprietary domestic furniture
polish. Do not use abrasive
cleaners.
This product should not be
discarded
with household waste.
Take to your local authority waste
disposal only.
Care and maintenance
From time to time check that
there are no loose screws on
this unit.
Remove all fittings from the
plastic bags and separate them
into their groups.
Keep children and animals
away from the work area, small
parts could choke if swallowed.
Whilst it is not recommended
this bed is used by children
below the age of 6. Due to the
risk of head and limb
entrapment, children above this
age should be reminded of the
dangers.
Make sure you have enough
space to layout the parts before
starting.
Assemble the item as close
to its final position (in the same
room) as possible.
Dispose of all packaging
carefully and responsibly.
Place the product on flat and
steady surface during use.
Assemble on a soft level
surface to avoid damaging the
unit or your floor.
Keep these instructions for
future use.
To ensure an easier assembly,
we strongly advise that all
fittings are only finger tightened
during initial assembly. Only
upon completion of the
assembly should all fixing points
be fully tightened.
Parts of the assembly will be
easier with 2 people.

Please check you have all the parts listed below
Components - Parts
2
1
5
4
If you have damaged or missing components,
call the Customer Helpline: 08456 400800
3
2
Side frame (Left) x 1 (93.8 x 86.7cm) Side frame (Right) x 1 (93.8 x 86.7cm)
Slat x 12 (91.5 x 1.9cm)
Side rail x 2 (194 x 5cm)
Back panel (193.5 x 42cm)

Please check you have all the fittings listed below
Components - Fittings
3
If you have damaged or missing components,
call the Customer Helpline: 08456 400800
Note: The quantities below are the correct amount to complete the assembly. In some cases more
fittings may be supplied than are required.
25mm Allen screw x 8
Ruler - Use this ruler to help correctly identify the screws
0510 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 155 160 165 170
A
Allen key x 2
ABC
12mm Allen screw
(nylon coated) x 24
Washer-Ø16 x 8
DE
GJ
K
F
H
Stud x 4 Nut x 24
Rubber washer-Ø24 x 8
Finial x 4
Finial base x 4
55mm Allen screw x 6

H
EA
2
4
2
4
4
HEA
1
A
EH
4
1
2
4
4
5
C
C
C
C
C
C
Assembly Instructions
4
Step 1
Attaching bed frame
Two people will be needed
here.
a: With help, assemble
side rails in between
side frames and
using fixings , and
.
Note: Do not fully tighten
the fixings!
4
AE
H
a:
b:
2
1
b: Assemble back panel
in between the side
frames using fixings .
5
C

D
D
D
D
D
1
2
1
K
G
K
G
K
G
K
G
K
G
1
2
5
43
F
B
F
B
3
4
5
Step 2
Assembly is complete.
Step 3
If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800
Justwise Group LTD., 6 The Shires, Shire Hill Industrial Estate, Saffron Walden Essex. CB11 3AP
Assembly Instructions
Attaching slats
Assemble slats to side
rails using fixings
and .
Fully tighten all fixings
from previous steps.
3
4F
B
Attaching finials
Screw studs into the
tops of side frames
and .
Locate finial bases over
the studs.
Screw finials onto the
studs.
D
1
2
K
G