Argos 600/6039 User manual

Dining Chair
Assembly Instructions - Please keep for future reference
Dimensions
Width - 46cm
Depth - 54cm
Height - 87cm
Ｉｍｐｏｒｔａｎｔ – Ｐｌｅａｓｅ ｒｅａｄ ｔｈｅｓｅ ｉｎｓｔｒｕｃｔｉｏｎｓ ｆｕｌｌｙ ｂｅｆｏｒｅ ｓｔａｒｔｉｎｇ ａｓｓｅｍｂｌｙ
Important – Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline: 0845 640 0800
Issue 1 - 16/03/12
600/6039
600/6053
600/6022
600/6046
600/6077

Safety and Care Advice
Important – Please read these instructions fully before starting assembly
Care and maintenance
1
• Check you have all the
components and tools listed on
pages 2 and 3.
• Remove all fittings from the
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Make sure you have enough
space to layout the parts before
starting.
• Do not stand or put weight on
the product
this could cause damage.
• Assemble the item as close
to its final position (in the same
room) as possible.
• Assemble on a soft level
surface to avoid damaging the
unit or your floor.
• Parts of the assembly will be
easier with 2 people.
• We do not
recommend the
use of power
drill/drivers for
inserting screws,
as this could damage the unit.
Only use hand screwdrivers.
• Dispose of all packaging
carefully and responsibly.
• Only clean using a damp cloth
and mild detergent,do no use
bleach or abrasive cleaners.
• From time to time check that
there are no loose screws on
this unit.
• This product should not be
discarded with household
waste. Take to your local
authority waste disposal centre.
during assembly,

Components - Parts
Please check you have all the parts listed below
2
Seat (44 x 45 cm) Top leg (64.5 x 43.3 cm) Bottom leg (64.5 x 43.3 cm)
1 2 3

3
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 155 160 165 170
Ruler - Use this ruler to help correctly identify the screws
Components - Fittings If you have damaged or missing components,
call the Customer Helpline: 0845 640 0800
Please check you have all the ttings listed below
Tools required
A
D
B
E
C
Bolt x 4 (M6 x 32mm) Bolt x 1 (M6 x 15mm) Spring washer x 5 (M6)
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150
0 1 2 3 4 5 6
Ruler/tape
measure
Note: The quantities below are the correct amount to complete the assembly. In some cases more
ttings may be supplied than are required.
G
Allen key x 1
White connector x 4 (5/8”) Plastic feet x 4
F
Rubber cap x 4

Assembly Instructions
Step 1
4
Step 2
Continued on next page.
3
1
2
2
D
E
G
A
C
POINT TO
SEAT FRONT
Attaching connectors
and feet to the legs.
seat.
Slide the white connectors
Don legs 2and 3 .
Insert plastic feet Efully
into the ends of legs 2
and 3 .
Attaching leg 2 to chair
Place the seat 1 on a
covered table top.
With the arrow marks on
the legs pointing to seat
front, move the connectors
so that they are aligned
to the holes of the leg
and the screw threads on
the seat. Assemble the
legs to the chair seat with
bolt A using allen key
G .

Assembly Instructions
Step 3 - continued
5
If you need help or have damaged or missing parts, call the Customer Helpline: 0845 640 0800
Argos Ltd MK9 2NW
Step 4
3
G
A
C
G
FF
FF
B
C
Attaching leg 3 to chair
seat.
Final Assembly
With the arrow marks on
the legs pointing to seat
front, move the connectors
so that they are aligned to
the holes of the leg and the
holes on the seat.
Assemble the legs to the
chair seat with bolt A
using allen key G .
Fasten bolt B with washer
Cwhere legs 2and
3overlap.
Cover the white connector
Dwith Rubber cap F.
Turn the chair over
carefully.