Argos 833/4792 User manual

White Wooden Corner Cabinet
833/4792
Issue 1 - 8/30/12
35cm
25cm
55cm

Components - Panels
Please check you have all the panels listed below
12
5
3
4
Middle back Panel Left side Panel Right side Panel
Bottom Panel
Top Panel Adjustable shelf
2
If you have damaged or missing components,
call the Customer Helpline:08456 400800
7Door Panel 8Left & Right back Panel x 2
6

Components - Fittings
Please check you have all the fittings listed below
Note:The quantities below are the correct amount to complete the assembly .In some cases more
fittings may be supplied than are required.
D
A
G
J
N
M
K
H
E
B C
F
I
L
3
Ruler - Use this ruler to help correctly identify the screws
Tools required
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 110 115 120 125 130 135 140 145 150 155 160 165 170
105
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150
0 1 2 3 4 5 6
Phillips screwdriver
(medium & large)
Flatblade screwdriver
(medium)
Small
hammer
Ruler/tape
measure
Drill
7mm Suitable drill bit
(for use with wall plug)
Eye protection
(when using a
hammer or glue)
Wooden dowel x 6 Locking Pin x 6 Locking Nut x 6
30mm Screw x 2 12mm Screw x 12 10mm Screw x 26
35mm Screw x 2
Wall plug(for solidwalls only) x 2 Wooden Handle x 1
Hanger Bracket x 2
Plastic Support x 3
Hinge x 2 Magnetic Catch x 1 Strike Plate x 1

Assembly Instructions
Step 1
Step 2
Assembling bottom and middle
back panel
Assembling left and right side
panels
a: b:
A
4
CC
C
C
C
C
C
A
AA
A
B
B B
B
a: Insert dowels and locking
pins into bottom panel .
Insert locking nut into left side
panel and right side panel .
NOTE:Pls follow option 1 if you
want to open door from left ,or
follow option 2 if you want to open
door from right.
Option 1 Option 2
Attach left and right side panels
onto the bottom panel .
Tighten the locking nuts to
secure the unit.
C
Tighten the locking nut to
secure the unit.
B
3
1
5
5
2
3
5
5
2
52 3
C
b: Insert locking nut into middle
back panel and attach it onto
the bottom panel .
5
23
1
5

Assembly Instructions
Assembling left and right back
panels
Assembling top panel
Step 3
A
C
I
I
I
I
I
I
I
N
N
N
N
AA
A
5
a: b:
Using 10 screws to attach left &
right back panels onto the unit.
NOTE:Pls make sure the hole in
left & right back panel match the
hanger bracket .
Carefully attach top panel to the
unit.
b:Insert dowels and locking nuts
into middle back panel and
side panels .
a:Screw locking pins into top
panel .
Using 10mm screws to fix
hanger brackets onto top panel.
4
3
2
8
1
1
88
4
4
2
4
3
C
C
C
B
B
B
B
B
Step 4
C
Tighten the locking nuts to
secure the unit.

D
D
H
H
H
E
E
F
F
G
G
L
D
D
H
H
H
H
H
H
H
L
G
Assembly Instructions
Step 5
Assembling door panel
NOTE:It would be useful to ask
someone to help you at this stage. a:
b:
6
Use 12mm screws to fix strike
plate onto the door panel .
Use 12mm screws to fix
magnetic catch onto the top
panel .
a:Use 12mm screws to fix hinges
onto the door panel .
Use 30mm screws to fix wooden
handle onto door panel .
b:Carefully use 12mm screws
to fix hinges onto the right side
panel .
3
7
7
7
7
7
4
4
D

A
7
NOTE:If you have damaged or missing components,
call the Customer Helpline:08456 400800
Argos LTD,489-499 Avebury Boulevard,
Central Milton Keynes, MK9 2NW
6
2
JJ
J
N
K
Assembly Instructions
Step 7
Step 6
NOTE:It would be useful to ask
someone to help you at this stage.
NOTE:It would be useful to ask
someone to help you at this stage.
Insert plastic supports into side
panels and middle back
panel .
Carefully put the adjustable shelf
panel on it.
Fixing to the wall
Assembling adjustable shelf
panel
NOTE: Please make sure the unit
is secure before use.
The assembly is now complete.
M
Use 35mm screws and wall
plugs to fix the unit on the wall.
6
1
223
M
M
K
K
J

A Guide to - Wall Mounting & Fixings
Revision 2 - 7/10/09
Important note:
Types of walls
Care &
Maintenance
No.1 “General Purpose” wall plug
No.6 “Shield Anchor” wall plug
Heavy loads
No.3 “Cavity Fixing” wall plug
No.4 “Cavity Fixing-Heavy Duty”
wall plug
No.5 “Hammer Fixing” wall plug
No.2 “Plasterboard” wall plug
Generally aerated blocks should not
be used to support heavy loads, use
a specialist tting in this case. For light
loads, general purpose wall plugs can
be used.
For use with heavier loads such as TV
& HiFi speakers and satelite dishes etc.
For use with plasterboard partitions or
hollow wooden doors.
For use when tting or supporting
heavy loads such as shelving, wall
cabinets and coat racks.
For use with walls stuck with
plasterboard. The hammer xing allows
it to be xed to the wall rather than the
plasterboard. Always check the xing
is secure to the retaining wall.
For use when attaching light loads on
to plasterboard partitions.
Safety: Always check the fitting
and location to ensure your safety
in and around the home.
Fitting: From time to time check
the fitting to ensure the wall plugs
or screws do not become loose.
You can use one of the following types of wall plug if your walls are made
of brick, breeze block, concrete, stone or wood.
Important: When drilling into walls always
check that there are no hidden wires or pipes etc.
Hints:
1: General rule: Always use a larger screw and wall plug
if you are not sure.
2: Ensure you use the recommended drill bit to match the wall
plug and hole size.
3: Ensure you drill the hole horizontally, do not force the drill or
enlarge the hole.
4: Take extra care when drilling high walls, ceilings and ceramic
tiles. Ensure wall plugs are inserted beyond the thickness of
the ceramic tiles to avoid the tiles splitting or cracking.
5: Ensure wall plugs are well tted and are a tight t in the
drilled hole.
If plastic wall plugs
are supplied with your
product:
Make sure that the screws and wall plugs being used
are suitable for supporting your unit. Consult a qualified
tradesperson if you are unsure.
- these are only suitable for
use in masonry walls.
If you are in any doubt about
the correct wall plugs for
your wall, seek professional
advice.
Failure of the product due to
using incorrect xings is the
responsibility of the installer.