Argos Heathdon Habitat Lavendon 953/0083 User manual

Heathdon/
Lavendon
Issue 1 - 29/04/21
Spare Parts
www.argos-support.co.uk
Customer Support
[email protected]
0370 112 1928
0345 640 2020

Safety and Care Advice
Product Details
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
Keep children and animals
away from the work area, small
parts could choke if swallowed.
Make sure you have enough
space to layout the parts before
starting.
This product has been
constructed to be used in the
domestic environment only and
not for commercial purposes.
Care and maintenance
Only clean using a damp cloth
and mild detergent. Do not use
abrasive cleaners.
Use a dry cloth to clean the
product, furniture polish is
not recommended.
Assemble the item as close
to its final position (in the same
room) as possible.
Assemble on a soft level
surface to avoid damaging the
unit or your floor.
We do not
recommend the
use of power
drill/drivers for
inserting screws
as this could damage the unit.
Only use hand screwdrivers.
Parts of the assembly will be
easier with 2 people.
Dispose of all packaging
carefully and responsibly.
From time to time check that there
are no loose screws, nuts or bolts.
If there are please re-tighten.
This product should not be
discarded with household
waste.Take to your local
authority waste disposal
centre.
2
4’ Bed Grey Fabric 945/7276 4’6 Bed Grey Fabric 953/6142 5’ Bed Grey Fabric 951/4212
4’ Bed Grey PU 952/3791 4’6 Bed Grey PU 953/0083
5’ Bed Black PU 952/3526
4’ Bed Black PU 945/0510 4’6 Bed Black PU 953/2160
5’ Bed Grey PU 948/2090
Important Ottoman Safety Warnings
Caution.This bed uses a pressurised mechanism.
Use caution when operating - Always use two hands at arm’s length, and only where illustrated on the
product.
You must ensure the mattress is on the bed frame before lifting the mechanism - Failure to do so may
result in injury.
Please ensure Children and pets are kept away from the bed when operating the bed mechanism.
If removing the mattress, make sure that the frame is secured as it could flip open.
Only use the storage compartment when when the frame is fully raised in the ‘up’ position.
No children or animals are left unattended when the frame is in the ‘up’ position.
Do not remain on the bed whilst the lifting mechanism is in use.
Beware of Entrapment - Keep both hands clear of mechanism when operating the mechanism.
When lifting the bed remove all bedding - Except the fitted sheet.
ENSURE MATTRESS IS ON
BEFORE LIFTING
DON'T LIFT WITHOUT MATTRESS
Sainsbury's Argos is a trading name of both: Argos Limited, Registered office: 489-499 Avebury Boulevard, Milton Keynes, United
Kingdom, MK9 2NW, registered number: 01081551 (England and Wales); and Sainsbury's Supermarkets Limited, Registered
office: 33 Holborn, London, EC1N 2HT, registered number: 03261722 (England and Wales). Both companies are subsidiaries of J
Sainsbury's plc. Argos (N.I.) Ltd, Forestside Shopping Centre, Upper Galwally, Belfast, United Kingdom, BT8 6FX. Argos Distributors
(Ireland) Limited, Unit7, Ashbourne Retail Park, Ballybin Road, Ashbourne, County Meath, Ireland.

Fittings (Shown to scale)
3
B
8x25mm Bolt x 508x45mm Bolt x 6
F
17mm Flat washer x 58
A
E
D
8mm Bolt x 4
C
Nut x 6
12mm Spring washer x 34
G
8x60mm Bolt x 2
Note: All fittings packed inside the back of the headboard

9
4
5Hinge Mechanism (x 1 pair)
NOTE: PISTON ATTACHED
6 7 Fabric base x 1 (4'-1965 x 1280mm)
(4'6-1965 x1430mm)(5'-2065 x 1580mm)
Note: Packed inside the back
of the headboard
Ottoman end frame (Headboard) x 1
(4'-1213 x 85mm)(4'6-1363 x85mm)
(5'-1513 x 85mm)
NOTE:EXTRA HOLES
Note: Packed inside the back
of the headboard
11 Ottoman frame (Sides) x 2
(4'/4'6-1822 x 30mm)(5'-1922 x 30mm)
8Mattress support bracket x 2
Note: Packed inside the back
of the headboard
1Right side rail x 1
(4'/4'6-1930 x 305mm)(5'-2030 x 305mm)
2Left side rail x 1
(4'/4'6-1930 x 305mm)(5'-2030 x 305mm)
3Headboard x1 (4'-1350 x 860mm)
(4'6-1500 x 860mm)(5'-1650 x 860mm)
4Footboard x1 (4'-1300 x 305mm)
(4'6-1450 x 305mm)(5'-1600 x 305mm)
Note: Packed inside the back
of the headboard
10 Ottoman end frame (Footboard) x 1
(4'-1213 x 85mm)(4'6-1363 x 85mm)
(5'-1513 x 85mm)
Note: Packed inside the back
of the headboard
Metal corner plate x 4 (169 x 35mm)
Note: Packed inside the back
of the headboard
Parts

Double slat caps x 14 (4'-55mm)
Double slat caps x 14 (4'6-55mm)
Double slat caps x 15 (5'-55mm)
Note: Packed inside the back
of the headboard
Single slat caps x 28 (4'-55mm)
Single slat caps x 28 (4'6-55mm)
Single slat caps x 30 (5'-55mm)
Note: Packed inside the back
of the headboard
5
Bentwood slats x 28 (4'-598 x 9 x 53mm)
Bentwood slats x 28 (4'6-675 x 9 x 53mm)
Bentwood slats x 30 (5'-750 x 9 x 53mm)
Note: Packed inside the back
of the headboard
Support Leg x 2 (25 × 205mm)
Note: Packed inside the back
of the headboard
12 13
14 15
Ottoman frame centre support x 1
(4'/4'6-1822 x 30mm)(5'-1922 x 30mm)
16 17
Ottoman frame support x 1
(94 × 40mm)
Note: Packed inside the back
of the headboard
Parts

Ruler/tape
measure
Allen key (Supplied)
Spanner (Supplied)
6
Box spanner (Supplied)
Tools required

7
1
28x25mm Bolt x 12
B
17mm Flat washer x 12
F
12mm Spring washer x 12
G
Leave screws loose
4
3
B
F
G
B
F
G
B
F
3
B
F
4
G
G
Shown upside down
Unzip
3
B
8x25mm Bolt x 508x45mm Bolt x 6
F
17mm Flat washer x 58
A
E
D
8mm Bolt x 4
C
Nut x 6
12mm Spring washer x 34
G
8x60mm Bolt x 2
Components packed inside back of headboard
WARNING!
The headboard is heavy.
Lift with care.

D
F
31
Holes at
headboard end
3
1
2
13
4
D
F
8
3
4
Do not fully tighten fixings!
5mm Allen key x 1
4
13
8x60mm Bolt x 2
D
17mm Flat washer x 2
F
12mm Spring washer x 2
G
5mm Allen key x 1
GG
B
F
G

9
5
6Turn
Product
Ensure frame is square
Velcro fastening
8x25mm Bolt x 8
B
17mm Flat washer x 8
F
12mm Spring washer x 8
G
5mm Allen key x 1
7
3
3
4
1
1
2
6
B
FG
B
FG

B
F
1
2
5B
10
7
8Turn
Product
5mm Allen key x 18x25mm Bolt x 10
B
17mm Flat washer x 10
F
Beware of risk of entrapment
from folding hinges!
5
F
3
3
4
8mm Bolt x 4
C
C
C

G
F
B
12
F
B
Headboard end
Extra holes
Footboard end
Shown upside down
11
10
9
11
12
G
F
B
Legs this end
8x25mm Bolt x 4
B
17mm Flat washer x 4
F
5mm Allen key x 1
8x25mm Bolt x 12
B
17mm Flat washer x 12
F
12mm Spring washer x 12
G
9
10
11
Shown upside down
F
B
17
17
12
17
5mm Allen key x 1

B
F
Headboard end
10
B
F
17mm Flat washer x 6
F
Nut x 6
E
5mm Allen key x 18x45mm Bolt x 6
A
8x25mm Bolt x 4
B
17mm Flat washer x 4
F
5mm Allen key x 1
11
12
8
9
9
10
Turn
Product
A
11
5
F
E
12
Spanner x 1
Beware of risk of entrapment
from folding hinges!

13
13 Important: Two people required.
Frame to be fully supported at
all times!
UP
Nut pre-assembled
1
5
Box spanner x 1

14
a: 15
14
Repeat
x14
Repeat
x15
4'/4'6
5'
b:
11
14
15
c:
12
16
14
11
11
12
14
14
15
15
16
14
12
17
14 15 15 14
16
Slats to arch upwards