Argos 618/2915 User manual

TC Belvoir Bamboo & White Shelving Unit
618/2915
Issue 1 - 10/08/16
80cm
30cm
136cm
3

Components - Panels
Please check you have all the panels listed below
12
5
3
4
Left leg x 2 Right leg x 2 Rail x 8
3rd shelf
4th shelf
1st shelf
2
If you have damaged or missing components,
call the Customer Helpline:03456 400800
7
2nd shelf 6

Components - Fittings
Please check you have all the fittings listed below
Note:The quantities below are the correct amount to complete the assembly .In some cases more
fittings may be supplied than are required.
D
A
GHI
E
B C
F
3
Locking Pin x 16 Locking Nut x 16
45mm Screw x 20 35mm Screw x 2 12mm Screw x 2
Wooden dowel x 26
Hanger bracket x 2
Wall plug(for solid walls only) x 2
Tools required
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 110 115 120 125 130 135 140 145 150 155 160 165 170
105
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150
0 1 2 3 4 5 6
(medium & large)
Phillips screwdriver Small
hammer
Ruler/tape
measure
Flatblade screwdriver
(medium)
6mm Suitable drill bit
(for use with wall plug)
Eye protection
(when using a
hammer or glue)
Hammer Drill
(Only for dril hole on the wall)
Ruler - Use this ruler to help correctly identify the screws
Cam cap x 16

Assembly Instructions
Step 1
Assembling leg
a:
b:
C
C
C
D
D
A
A
4
A
a:
Using wooden dowel and 45mm
screw to attach left leg and
right leg .
b:
Screw locking pins into left leg
and right leg .
1
2
2
1
NOTE:It would be useful to ask
someone to help you at this stage.
3
1
3
1
3
2
3
2

Assembling rails a:
c:
b:
C
C
C
Attach rails onto the unit.
a:
Use 12mm screws to fix hanger
bracket to the 2nd shelf
as shown.
b:
Insert wooden dowel into left leg
and right leg .
Insert locking nut into rails
and tighten the locking nut to
secure the unit.
3
Assembly Instructions
Step 2
5
NOTE:It would be useful to ask
someone to help you at this stage.
B
1
2
3
B
F
F
H
H
c:
Repeat above steps to assemble
the other legs .
3
13
2
3
2
3
1
3
2
3
1
3
1
3
3
3
5
3
3
3
5
3
3
3
3
3
3
3
33
3
3
3
3
2
B
B

a:
b:
D
NOTE:It would be useful to ask
someone to help you at this stage.
Repeat above steps to assemble
2nd shelf , 3rd shelf and 4th
shelf to the unit as shown.
3
5
C
Assembling shelf
b:
Attach 1st shelf onto the unit
and use 45mm screw to fix it to
the uint.
a:
Insert wooden dowel into rails
.
66
7
4
4
5
7
3
Assembly Instructions
Step 3
6
C
D
3
3
3
3
I
I
I
I
Use cam caps to cover the
locking nuts as shown.

E
E
H
H
NOTE:It would be useful to ask
someone to help you at this stage.
G
G
Use 35mm screw and wall plug
to fix the unit on the wall via
hanger bracket as shown.
A
7
NOTE:If you have damaged or missing components,
call the Customer Helpline:03456 400800
Argos LTD,489-499 Avebury Boulevard,
Central Milton Keynes, MK9 2NW
Assembly Instructions
Step 4
Fix to the wall
NOTE: Please make sure the unit
is secure before use.
The assembly is now complete.

A Guide to -Wall Mounting & Fixings
Revision 2 - 7/10/09
Important note:
Types of walls
Care &
Maintenance
No.1 “General Purpose” wall plug
No.6 “Shield Anchor” wall plug
Heavy loads
No.3 “Cavity Fixing” wall plug
No.4 “Cavity Fixing-Heavy Duty”
wall plug
No.5 “Hammer Fixing” wall plug
No.2 “Plasterboard” wall plug
Generally aerated blocks should not
be used to support heavy loads, use
loads, general purpose wall plugs can
be used.
For use with heavier loads such as TV
& HiFi speakers and satelite dishes etc.
For use with plasterboard partitions or
hollow wooden doors.
heavy loads such as shelving, wall
cabinets and coat racks.
For use with walls stuck with
is secure to the retaining wall.
For use when attaching light loads on
to plasterboard partitions.
Safety: Always check the fitting
and location to ensure your safety
in and around the home.
Fitting: From time to time check
the fitting to ensure the wall plugs
or screws do not become loose.
You can use one of the following types of wall plug if your walls are made
of brick, breeze block, concrete, stone or wood.
Important: When drilling into walls always
check that there are no hidden wires or pipes etc.
Hints:
1: General rule: Always use a larger screw and wall plug
if you are not sure.
2: Ensure you use the recommended drill bit to match the wall
plug and hole size.
3: Ensure you drill the hole horizontally, do not force the drill or
enlarge the hole.
4: Take extra care when drilling high walls, ceilings and ceramic
tiles. Ensure wall plugs are inserted beyond the thickness of
the ceramic tiles to avoid the tiles splitting or cracking.
5:
drilled hole.
If plastic wall plugs
are supplied with your
product:
Make sure that the screws and wall plugs being used
are suitable for supporting your unit. Consult a qualified
tradesperson if you are unsure.
- these are only suitable for
use in masonry walls.
If you are in any doubt about
the correct wall plugs for
your wall, seek professional
advice.
Failure of the product due to
responsibility of the installer.