Argos hygena 385/9715 Datasheet

Assembly lnstructions - Please keep for future reference
Alto Sideboard
Width - 90cm
Depth - 38cm
Height -70cm
Dimensions
If you need help or have damaged or missing parts, call the Customer Helpline: 0345 6400 800
Important - Please read these instructions fully before starting assembly
Issue 1-22-05-15
385/9715
hygena

Safety and Care Advice
Check you have all the
components and tools listed on
pages 2 and 3.
Remove all fittings from the
plastic bags and separate them
into their groups.
Keep children and animals
away from the work area, small
parts could choke if swallowed.
Make sure you have enough
space to layout the parts before
starting.
Assemble the item as close
to its final position (in the same
room) as possible.
Assemble on a soft level
surface to avoid damaging the
unit or your floor.
Assembly requires 2 people.
Do not stand or put excessive
weight on the product,this could
cause damage.
We do not
recommend the
use of power
drill/drivers for
inserting screws,
as this could damage the unit.
Only use hand screwdrivers and
Allen keys.
Dispose of all packaging
carefully and responsibly.
1
Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
From time to time check that
there are no loose screws on
this unit.
This product should not be
discarded with household
waste. Take to your local
authority waste disposal centre.

Components - Parts lf you have damaged or missing components.
call the Customer Helpline: 0345 6400 800
2
7
5
Leg x 4
(4.5/3x3cm)
4
12
Divider
(37x36.6x1.5cm)
Side panel (left)
(37x37x1.5cm)
3
Side panel (right)
(37x37x1.5cm)
Back panel
(88.6x38.6x0.3cm)
Top panel
(90x38x1.5cm)
9Drawer back panel x 2
(37.9x14x1.2cm)
10 Drawer side panel (right) x 2
(30x14x1.2cm) 12
11
(30x14x1.2cm)
Drawer base panel x 2
(38.6x29.5x0.3cm)
13
(42.3x18x1.2cm)
Drawer side panel (left) x 2
Drawer front x 2
inside
underside
underside
underside
6Base panel
(90x38x1.5cm)
8
Door
(36.6x42.3x1.2cm)
inside

3
0345 6400 800
B C
D
G
E F
A
F
Ruler - Use this ruler to help correctly identify the screws
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 155 160 165 170
Tools required
0
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150
1 2 3 4 5 6 Ruler/tape measure
Components - Fittings
Metal dowel x 20 Small locking nut x 8 (15x9.5mm)
Wooden dowel x 12 (6X30mm)
Phillips screwdriver
(Not supplied)
Drawer runner x 2 sets (L300mm)
Wood screw x 8 (4x30mm)
Screw x 23 (3x12mm)
Screw x 20 (3x12mm)
H
Large locking nut x 12 (15x12mm)
J
Metal bracket x4
K
Screw x 14 (2.2x10mm)
LM
NP Q
Metal plate x 1 Screw x 2 (2.5x14mm)
Magnetic catch x 1 Plastic hinge plug x 2 Door hinge x 2

4
Assembly Instructions
6
BB
BD
B
BA
X2
1
13
P
B
B
4
BN
BM
4
2
3
BD
6
Preparing panels
Place top panel , base
panel , and drawer front
panels flat onto the floor
with the fixing holes facing up.
Screw metal dowels into
each panel as shown.
Screw metal dowels as far as
shown. Do not overtighten.
Insert plastic hinge plugs
into top panel and base
panel as shown.
Assembling panels
a: Fit magnetic catch onto
divider using screws .
Note: Ensure the magnetic
side is facing out.
b: Insert wood dowels into
base panel as shown.
Carefully locate side panels
and and divider
onto base panel in the
locations shown.
Note: Ensure the cut out
edges on the side panels
and and base panel are
correctly located at the back.
The magnetic catch on divider
is at the front.
Insert large locking nuts
into side panels and
and divider .
Turn locking nuts clockwise
to secure.
P
B
a:
b:
4
Front
cut out edges at back
cut out at back
1
6
13
B
P
1
6
4
BN
BM
BA
6
2 3 4
6
2
3 6
4
BD
23
4

5
Assembly Instructions
BD
2
4
8
8
BE
BE
BQ
BL
BE
BE
2
1
BA
BD
Assembling door
a: Fit door hinges to the
top and bottom of door
using screws as show.
Fit metal plate onto door
panel using screws .
b: Carefully locate door in
between left side panel and
divider , by inserting door
hinge into plastic hinge
plug on base panel .
Assembling top panel
With help, carefully locate top
panel into position as
shown.
Note: Ensure the cut out edge
on top panel is correctly
located at the back, and take
care to align the door hinge
with the hole in the underside
of the top panel.
Insert large locking nuts
into side panels and
and divider .
Turn locking nuts clockwise
to secure.
Insert wood dowels into
the top edges of side panels
and and divider .
8
8
BE
BQ
3
6
BA
BA
4
3
BQ
BE
8
8BE
BL
8
3
4
BQ
BP 6
BA
2 3 4
1
1
BD
23
4
a:
b:
BQ
BP
back
align hinge

6
Assembly Instructions
BE
BF
BF
BE
BE
BE
7
BK
Assembling drawer runners
Attach one half of drawer
runners onto side panel
and divider as
shown. Secure with screws
.
Assembling back panel
With help, carefully turn the
unit onto it’s front.
Place back panel into the
recess around the back of the
unit. Secure using screws .
Note: the correct fixing hole
positions are shown on the
drawings.
BF
BE BE
Note: Ensure the unit is
straight and square before
securing back panel .
7
BF
BF
Base
BF
24
BE
7
BK
4
2

Assembly Instructions
7
8
BH
BJ
6
5
5
5
5
Preparing base
Secure metal brackets to
base panel using screws
.
Attaching legs
Screw legs onto metal
brackets until they are
secure.
Do not overtighten.
BJ
6
BH
BJ
BJ
5

Assembly Instructions
8
If you need help or have damaged or missing parts, call the Customer Helpline: 0345 6400 800
Home Retail Group. 489-499 Avebury Boulevard. Saxon Gate West. Central Milton Keynes. MK9 2NW
9
X2
11
10
13
12
9
10
11
BC
BG
BE
BF
9
Assembling drawers
a: Locate drawer side
panels and onto
drawer front panel .
Note: Ensure all grooves are
correctly located at the bottom.
Insert small locking nuts
into drawer side panels
and . Turn locking nuts
clockwise to secure.
b: Slide drawer base panel
into the groove.
c: Locate drawer back panel
in between drawer side
panels and . Secure
using screws .
d: Locate drawer runners
onto each side of the drawer
body. Secure using screws
.
Repeat for both drawers.
Locating drawers
With help, turn the whole unit
upright.
Warning: The unit is
heavy. Lift with care.
Carefully slide drawers into
position as shown.
a: b:
c: d:
BE
BE
BF
10
10 11
13
10
11
BC
12
10 11
9
BG
BF
BE
align grooves