Argos PAULO LARGE RECLINER 1454026 User manual

IMPORTANT
1. Read these instructions carefully and
familiarise yourself with the procedure
before assembling the unit.
2. Check that you have all the component
parts following the list on the back
cover and familiarise yourself with
each part before proceeding.
3. Take all the fittings out of the plastic bag
and separate them into their groups.
4. Ensure you have enough space to lay out
all the parts before assembly.
Components
5. To avoid scratching it is recommended
that you assemble the unit on a soft
level surface.
BCD
ASeat Unit
1 x Left Back Cushion 1 x Centre Back Cushion 1 x Right Back Cushion
Simple Assembly Instructions - Please keep for future reference 145461738577
PAULO LARGE RECLINER

fig. 4
Assembly Instructions Assembly Instructions
Stage 2 – Fitting the Back CushionsStage 1 –
2.

NOTE: It would be useful to ask
someone to help you at this
stage.
NOTE: It would be useful to ask
someone to help you at this
stage.
Attach the Left B , Centre C
and Right
Back Cushions D
Then engage the metal locks and
push them together until you hear
them lock into position. 
NOTE: Carefully line up the
Ensure they align
correctly.
Metal Lock
BC
See fig.4.
to the seat unit .
two side metal locks.
Fit the velcro cover on
the back cushions onto the
velcro of the seat unit.
fig. 5
NOTE: You can ensure the Back
together by adjusting the
Cushions are closely joined
metal frame as show in fig. 5.
Step 1 ( Fig. 1)
- Carefully tilt back the seat
unit onto it's back.
Transit Packing With a spaner
and dispose of it(See Fig 2).
See fig.2.
Fig. 1
Fig.2
Step 2 ( Fig. 2)
See fig.1.
This is not required for any other use.
D
A
Remove the Wooden Frame
1. 
between two seat.
EPE
-Remove the EPE from the gap
-Get the fitting bag from Bracket Rear.
spaner
Preparing the Seat Unit
A

fig. 7
Assembly Instructions Assembly Instructions
Stage 4 – Finishing the UnitStage 3 – Operating the Unit
1. Finally carefully place the unit in
the desired location. 
Back and Foot Rest Adjustment
This Chair features a reclining back
rest and raised foot rest. You need
to be sitting in the chair to activate
the features.
1. Pull the "Adjustment Lever" then
recline and the foot rest will
automatically lift up. 
2. Sit up and lock the foot rest.

3. Adjust the recliner to your own
requirements.
CAUTION:
-  Beware of entrapment. Keep
hands and fingers clear of the
the controls.
-  Ensure that children or pets are
not playing or lying in the way
operated.
-  Prevent children from playing
on the furniture or with the
controls.
Care and Maintenance
Safety
To avoid any risk of suffocation to animals or children dispose of the plastic
bags immediately.
Fitting
From time to time please ensure there are no loose screws on the product.
Cleaning
As with all surfaces clean with a damp cloth and mild detergent, do not use bleach
or abrasive products.
Lever
See fig. 6.
See fig.6.
See fig. 7.
gently lean back. The chair will
position.
tilt mechanism when operating
when the tilt mechanism is
fig. 6
Adjustment
The sofa return to the normal