Argos Scandinavia User manual

Page 1 of 12
Scandinavia
Dressing table w. 8 drawers + stool
Scandinavia dressing table w. 8 drawers + stool
740mm
1400mm 580mm

Please sort out all parts before you begin to assemble the item.
This to make sure you always use the correct part.
Fittings contained in the box.
Tools needed.
A20 pcs. Cam - ø15 x 12mm B32 pcs. Cam - ø12 x 10,5mm C52 pcs. Bolt - ø6,5 x 24/11mm
E32 pcs. Screw - ø3,5 x 25mm F40 pcs. Screw - ø3,5 x 35mm
G30 pcs. Nail - 1,2 x 20mm
M8 pcs.
0
10
20
30
40
50
60
70
80
90
100
110
120
130
140
150
160
170
180
190
200
210
220
230
240
250
260
270
MM
H4 pcs. Dowel - ø6 x 30mm
Knob
ø40 x 30mm
P1 pcs. Nail guide
D8 pcs. Screw - ø3,5 x 12mm
K1 pcs. Allen key - 4mm
J4 pcs. Dowel - ø8 x 30mm
Hazard Warning !
Keep small components out of the reach of children.
Page 2 of 12
Scandinavia dressing table w. 8 drawers + stool
L8 pcs. Screw - ø7 x 60mm
N4 pcs. Angle - 16x20x20mm
Fittings A, B, C, D, E, F, G, H, J, L and N are shown in their a ctual dimensions.

Wooden parts contained in the box.
Page 3 of 12 Scandinavia dressing table w. 8 drawers + stool
1
1 pcs.
Top
11
2 pcs.
Back
6
8 pcs.
Drawer front
7
8 pcs.
Drawer back
8
8 pcs.
Drawer side, left
9
8 pcs.
Drawer side, right
5
2 pcs.
Plinth
10
8 pcs.
Drawer bottom
2
2 pcs.
Side, left
3
2 pcs.
Side, right 4
16 pcs.
Drawer runner
12
4 pcs.
Stool leg 14
2 pcs.
Side rail
13
2 pcs.
End rail
15
1 pcs.
Seat
1400 x 580mm
726x550mm
442 x 107mm
442 x 107mm
680x336mm
726x550mm
521 x 16mm
314 x 157mm
286 x 92mm
318 x 55mm
439 x 297mm
386x55mm
194 x 90mm 340 x 90mm
450 x 350mm

1
2
3
4
6
5
8
15
7
9
13
14
11
12
10
13 14
Key diagram.
Page 4 of 12 Scandinavia dressing table w. 8 drawers + stool
Function of cam & bolt.
134
2
Step 2:
Push the wooden panel
with the attached bolt onto
the other wooden panel.
Step 4:
Tighten: Turn the cam to
the right.
Step 1:
Fix the bolt to the
wooden panel.
Step 3:
Place the cam into the
hole, arrow pointing
towards the bolt.
5
2
3
11
12
12
12
4
4
4
4
4
4
4
4
4
x 8
4
4
4
4
4
4

1. Fixing the drawer runners to the sides.
2. Mounting the bolts to the sides.
3. Mounting the bolts to the top.
Fig. 1.1
E
C
E
32 Pcs.
C
4 Pcs.
C
8 Pcs.
EEE
E
E
E
EE
E
E
E
E
E
EE
C
C
C
C
C
C
C
Page 5 of 12 Scandinavia dressing table w. 8 drawers + stool
Fix the drawer runners
"4" to the sides "2" and
"3", using screws "E".
Screw the screw in until
the screw head is sunk
and flush with the wood.
Screw the bolts "C" into
the holes indicated on
the sides "2" and "3".
Screw the bolts "C" into
the holes indicated on
the top "1".
2
2 Pcs.
Side, left
3
2 Pcs.
Side, right
1
Top
2
2 Pcs.
Side, left
3
2 Pcs.
Side, right
4
16 Pcs.
Drawer runner
444
4
4
4
4

4. Inserting the dowels to the plinth.
5. Mounting the plinth to the right hand side.
6. Adding the right hand side to the top.
Page 6 of 12 Scandinavia dressing table w. 8 drawers + stool
H
4 Pcs.
A
2 Pcs.
Fig. 6.1
Fig. 6.2
Knock the dowels "H"
into the holes indicated
on the plinths "5".
Press the plinths "5"
onto the right hand
sides "3".
See page 4 "Function of
cam & bolt".
Place the cam "A" into
the hole indicated, arrow
pointing towards the
side / bolt.
Tighten:
Turn the cam to the
right.
Lower the right hand
sides "3" onto the top "1".
DONT fix the sides to the
top until fig. 8. See page 7.
1
Top
3
Side, right
3
Side, right
3
2 Pcs.
Side, right
5
2 Pcs.
Plinth
5
2 Pcs.
Plinth
Rabbet = Back
Rabbet = Back

7. Mounting the left hand side to the plinth.
8. Fixing the sides to the top.
Page 7 of 12 Scandinavia dressing table w. 8 drawers + stool
A
2 Pcs.
A
8 Pcs.
3
3
A
AA
AA
A
Lower the left hand
sides "2" onto the top
"1".
Press the sides onto
the plinths "5".
See page 4 "Function
of cam & bolt".
Place the cam "A" into
the hole indicated,
arrow pointing
towards the side / bolt.
Tighten:
Turn the cam to the
right.
Fix the sides "2" and
"3" onto the top "1".
See page 4 "Function
of cam & bolt".
Place the cam "A" into
the hole indicated,
arrow pointing
towards the bolt.
Tighten:
Turn the cam to the
right.
2
32
3
5
Plinth
5
Plinth
1
Top
1
Top
2
Side, left
2
Side, left

9. Adding the back to the table - 1.
10. Adding the back to the table - 2.
Fig. 9.2
Fig. 9.1
90a
11
Back
11
Back
1
1
3
11 11
1
22
1
2
2
11
Back
11
Back
G
24 Pcs.
G
6 Pcs.
Page 8 of 12 Scandinavia dressing table w. 8 drawers + stool
GG
G
G
G
G
G
G
G
G
G
G
Place the back "11"
into the rabbet of
the top "1" and the
side "3".
See fig. 9.1
Ensure that there is
NO GAP between
the right hand side
"3" and the back
"11" , NOR between
the top and the
back.
Fasten the back with
nails "G" along the
Top. Use the nail
guide "P" as shown.
Fig. 9.2
The angle between
the top and the
side must be 90
degrees. Fig. 9.1
To accomplish
this, ensure that
there is NO GAP
between the right
hand side "3" and
the back "11".
Fasten the back
with nails "G"
along the sides.
Use the nail guide.
3
3
3
3

11. Mounting the bolts to the drawer front.
13. Sliding the drawer bottom into the drawer frame.
12. Mounting the drawer sides to the drawer front.
14. Mounting the drawer back to the drawer frame.
C
32 Pcs.
B
32 Pcs.
F
32 Pcs.
F
F
F
B
B
C
C
C
Page 9 of 12 Scandinavia dressing table w. 8 drawers + stool
8
9
6
8 Pcs.
Slide the drawer bottom
"10" into the grooves of
the drawer frame.
Screw the bolts "C" into
the holes indicated on the
drawer front "6".
Place the drawer
back "7" in between
the drawer sides "8"
and "9".
Fix the drawer back
using screws "F" into
the holes indicated.
Press the drawer sides
"9" and "8" onto the
drawer front "6".
Place the cams "B" into
the holes indicated,
arrows pointing towards
the drawer front / bolts.
Tighten:
Turn the cam to the
right.
"Function of cam & bolt"
see page 4.
6
8 Pcs.
8
8 Pcs.
9
8 Pcs.
10
8 Pcs.
7
8 Pcs.

15. Mounting the knobs to the drawer front.
16. Adding the drawers to the table.
F
8 Pcs.
Page 10 of 12 Scandinavia dressing table w. 8 drawers + stool
17. Mounting the bolts to the stool legs.
18. Inserting the dowels to the end rail.
C
8 Pcs.
J
4 Pcs.
C
J
Fix the knobs "M" to the
drawer front using
screws "F".
M
8 Pcs
6
Drawer front
Slide the drawers onto
the drawer runners.
13
2 Pcs.
End rail
12
4 Pcs.
Stool leg
Screw the bolts "C"
into the holes indicated
on the stool legs "12".
Knock the dowels "J"
into the holes indicated
on the end rails "13".