Argos Napoli 600/6259 User manual

Napoli Table
600/5896
600/5889
600/6259
600/6266
600/6273

Napoli - Table
Assembly Instructions - Please keep for future reference
Dimensions
Width - 69cm
Depth - 69cm
Height - 74cm
Important - Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800
Issue 1 - 25/06/12
600/6266
600/6259
600/6273

Components - Panels
Please check you have all the panels listed below
1Table Top x 1
(69 x 69)cm
Table Top x 4
(73 x 4.5)cm
2
2

Components - Panels If you have damaged or missing components,
call the Customer Helpline: 08456 400800
Please check you have all the panels listed below
Note: The quantities below are the correct amount to complete the assembly for 1 table. In some cases more
fittings may be supplied than are required
C
D
B
A
Tools required
Ruler - Use this ruler to help correctly identify the screws
JCBB Screw M8 x 50 x 8
Allen key M5 x 1
Flat washer 5/16” x 8 Spring washer 5/16” x 8
3

Issue 1 - 1/6/10
Dimensions
Width - 43cm
Depth - 45cm
Height - 88cm
Assembly Instructions- Please keep for future reference
Important - Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800
Astwood Chair
600/5092
Napoli Chair
600/5896
600/5889
600/6259
600/6266
600/6273

Safety and Care Advice
Important - Please read these instructions fully before starting assembly
Care and maintenance
• Check you have all the
components and tools listed on
pages 2 and 3.
• Remove all fittings from the
plastic bags and separate them
into their groups.
•Keepchildrenandanimalsaway
from the work area, small parts
could choke if swallowed.
• Make sure you have enough
space to layout the parts before
starting.
• Do not stand or put weight on
the product, this could cause
damage.
• Assemble the item as close to
its final position (in the same
room) as possible.
• Assemble on a soft level
surface to avoid damaging the
unit or your floor.
• Parts of the assembly will be
easier with 2 people.
• We do not
recommend the
use of power
drill/drivers for
inserting screws,
as this could damage the unit.
Only use hand screwdrivers.
• Dispose of all packaging
carefully and responsibly.
• The maximum safe weight of
user: 110kg.
• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
• From time to time check that
there are no loose screws on
this unit.
• This product should not be
discarded with household waste.
Taketoyourlocalauthoritywaste
disposal centre.
Note: if required the next page
can be cut out and used as
reference throughout the
assembly. Keep this page with
these instructions for future
reference.
1

Left side frame (41 x 88cm)
1Right side frame (41 x 88cm) 2
Front apron (4.5 x 33.5cm)
3
Seat cushion (39 x 43cm)
4
Back apron (4.5 x 33.5cm)
5
Back rest (38 x 33.5cm)
6
Cross bar (2 x 33.5cm)
7
Components - Panels
Please check you have all the panels listed below
If you have damaged or missing components,
call the Customer Helpline: 08456 400800
Note: Components listed below are required for one chair only.
2

50mm Screw x 6 60mm Screw x 2 30mm Screw x 4
Dowel x 8
Phillips screwdriver
(medium & large)
Flatblade screwdriver
(medium)
Small
hammer
Ruler/tape
measure
Eye protection
(when using a
hammer or glue)
Barrel Nut x 8 42mm Screw x 2
Tool x 1
AB C
Components - Fittings
Please check you have all the fittings listed below
Tools required
Ruler - Use this ruler to help correctly identify the screws
DE F
G
3
Note: The quantities below are the correct amount to complete the assembly for one chair. In some cases
more fittings may be supplied than are required.
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 155 160 165 170

Assembly Instructions
Step 1
Fitting the Back rest
a: Insert Dowels Dinto
Back rest 5.
Note: It would be useful to
ask someone to help you
at this stage.
b: Insert Dowels Dinto
Front apron 3and Back
apron 5.
4
a:
b:
6
3
5
D
D
D
6
D
D
D
D
D
3
D
D
5

b:
1
E
A
5
a: Insert Barrel nuts E
into Back rest 6.
Use Screws Ato fix Back
rest 5onto the Left side
frame 1.
Assembly Instructions
Step 2
Continued on next page.
Note: Do not tighten the
screws at this moment.
b: Insert Barrel nuts E
into Back apron 5.
Use Screw Ato fix Back
apron 5onto the Left
side frame 1.
Fitting the Left side
frame
Note: It would be useful to
ask someone to help you
at this stage.
Note: Insert Barrel nuts
into the Back rest taking
care to align the screw
holes.
Note: Insert Barrel nut into
the Back apron taking care
to align the screw hole.
5
A
E
a:
A
E
6
1
A
E
1
6
6
1
5
5
E
A
E
A

Assembly Instructions
Step 2 - continued
d: Use Screw Fto fix
Cross bar 7onto the Left
side frame 1.
c: Insert Barrel nuts E
into Front apron 3.
Use Screw Bto fix Front
apron 3onto the Left
side frame 1.
Note: Insert Barrel nut into
the Front apron taking care
to align the screw hole.
6
d:
c:
1
3
B
E
1
7
3
3
1
F
E
B
1
7
F

b: Use Screws Cto fix
the Right side frame 2
onto the unit.
Assembly Instructions
Step 3
Continued on next page.
Fitting the Right side
frame
Note: It would be useful to
ask someone to help you
at this stage.
a: Carefully attach Right
side frame 2onto the
unit.
7
b:
a:
2
2
F
F
2
2