Argos Wow Leo 167/9605 User manual

Wow Leo - Cabin Bed
Dimensions
Width - 195cm
Depth - 95cm
Height - 45cm
Issue 1 - 9/30/13
Important – Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800
Assembly Instructions - Please keep for future reference
183/6929
167/9605

1
Safety and Care Advice
Important – Please read these instructions fully before starting assembly
Note: if required the next
page can be cut out and used
as reference throughout the
assembly. Keep this page with
these instructions for future
reference.
• Check you have all the
components and tools listed on
pages 2 and 3.
• Remove all ttings from the
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Make sure you have enough
space to layout the parts before
starting.
• Do not stand or put weight on
the product, this could cause
damage.
• Assemble the item as close
to its nal position (in the same
room) as possible.
• Assemble on a soft level
surface to avoid damaging the
unit or your oor.
• Parts of the assembly will be
easier with 2 people.
• We do not
recommend the
use of power
drill/drivers for
inserting screws,
as this could damage the unit.
Only use hand screwdrivers.
• Dispose of all packaging
carefully and responsibly.
• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
• From time to time check that
there are no loose screws on
this unit.
• This product should not be
discarded with household waste.
Take to your local authority
waste disposal centre.
Care and maintenance
Skin contact: Remove
contamination by washing with
soap and water. This procedure
should also be followed prior to
eating and drinking.
Eye contact: Rinse immediately
with clean water for 15 minutes
and seek medical advice.
If swallowed: Seek medical
advice immediately.
Glue safety - Take care when using glue, please follow the advice below
• WARNING: Do not place this child`s bed near heat
sources, windows and other furniture.
• WARNING: Do not use this child`s bed if any part is
broken, torn or missing.
• WARNING: Not suitable for children under the age of
4 years.

Components - Panels
Please check you have all the panels listed below
2
Right side panel (95 x 42.5 cm)
1
Door (62.5 x 34.5 cm)
7
Front/back bed support x 4 (73 x 7 cm)
8
Middle bed board (95 x 64.5 cm)
9
Left/right crossbar x 4 (63 x 16 cm)
10
Middle crossbar x 2 (63 x 16 cm)
11
Left/right bed board x 2 (95 x 63.8 cm)
12
Bottom panel x 3 (80.7 x 62.9 cm)
13
Left side panel (95 x 42.5 cm)
2
Left/right central support x2 (63 x 20 cm)
3
Middle central support (63 x 20 cm)
4
Right shelf partition (95 x 36.5 cm)
5
Left shelf partition (95 x 36.5 cm)
6
If you have damaged or missing components,
call the Customer Helpline:
08456 400800

Please check you have all the ttings listed below
60mm wood screw x 14
Ruler - Use this ruler to help correctly identify the screws
Tools required
A
Screw-in dowel x 6
E
50mm xing screw x 28
B
Hinges x 2
H
30mm wooden dowel x 20
C
Mounting plate x 2
I
Note: The quantities below are the correct amount to complete the assembly. In some cases more ttings
may be supplied than are required.
100 20 30 40 50 60 70 80 90 100
0510 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 110 115 120 125 130 135 140 145 150 155 160 165 170
105
Cap x 6
F
Locking nut x 6
D
22mm Bolt for handle x 1
K
N
Stopper x 1
G
Handle x 1
16mm wood screw x 8 12mm wood screw x 18
J
Components - Fittings
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150
0 1 2 3 4 5 6
Phillips screwdriver
(medium & large)
Flatblade screwdriver
(medium)
Small
hammer
Ruler/tape
measure
Eye protection
(when using a
hammer or glue)
7mm Suitable drill bit
(for use with wall plug)
9mm Washer x 1
Allen key x 1
L
OM
3

Assemble right module
Two people are needed
here.
Insert the 30mm wooden
dowels Cto the right
side panel 1and to the
right shelf partition 5.
Position the right central
support 3and the right
crossbars 10 and x
them to the right side
panel 1through 60mm
wood screw Aand to
the right shelf partition
5 through 50mm xing
screw B.
Use the Allen key Ofor
the 60mm wood screw A
and a phillips screwdriver
for the 50mm xing
screw B.
4
Assembly Instructions
Step 1
Step 2
Assemble left module
Insert the 30mm wooden
dowels Cto the left
side panel 2and to
the left shelf partition 6
. Position the left central
support 3and the left
crossbars 10 and x
them to the left side
panel 2through 60mm
wood screw Aand to
the left shelf partition
6 through 50mm xing
screw B.
Use the Allen key Ofor
the 60mm wood screw
Aand the phillips
screwdriver for the 50mm
xing screw B.
A
B
B
B
C
C
C
A
A
A
C
A
C
C
B
Clockwise
B
Clockwise
B
B
B
C
C
A
Clockwise
A
O
Clockwise
A
O
5
1
2
6
3
10
10
3
10
10

Assembly Instructions
Attaching panels
Two people are needed
here.
Insert the 30mm wooden
dowels Cand the
screw-in dowels Eto
the left shelf partition
6and to the right
chelf partition 5. Use
a phillips screwdriver
for the screw-in dowels
E.Position the middle
central support 4and
the middle crossbars 11 .
Insert the locking nuts D
and use a screwdriver to
turn them clockwise to
lock. Put the caps Fof
the locking nuts.
Attaching panels
Two people are needed
here.
a: Insert the 30mm
dowels Cto the left side
panel 2and to the right
side panel 1like shown
on the drawing. Position
the left and the right bed
boards 12 .
a:
b:
b: Screw the left and
the right bed boards 12
through 50mm xing
screw B.
Use a phillips screwdriver
for the 50mm xing
screws B.
Step 4
Step 3
F
D
F
F
F
D
D
D
E
C
F
D
D
C
E
EC
CE
F
C
E
C
C
B
B
B
B
E
C
6
5
212
12
1
12
12
11
11
4
5
DE
Clockwise
B

6
c:
d:
Assembly Instructions
c: Position the middle
bed 9board and screw
it to the middle central
support 4through
50mm xing screw B.
Use a phillips screwdriver
for the 50mm xing
screw B.
Step 5
d: Screw the middle bed
board 9, the left bed
board 12 and the rigth
bed board 12 through
50mm xing screw B.
Use a phillips screwdriver
for the 50mm xing
screws B.
Attaching panels
Position the front and
the back bed supports
8and screw them to
the middle bed board 9
, the left bed board 12
and the right bed board
12 through 50mm xing
screw B.
Step 4 - continued
B
B
B
B
B
B
B
B
B
B
B
B
9
4
12
9
12
8
12
12
9
8
8
8
Clockwise
B
Clockwise
B
Clockwise
B
Note: Use the panel with
the thicker edge band
in the middle of the bed
with the thicker edge
facing the front.
Note: Place the two
mattress supports with
the thicker edge band at
the front of the bed.

Assembly Instructions
Attaching panels
First screw the front and
the back bed supports
8to the right side panel
1and to the left side
panel 2through 60mm
wood screw A. After that
screw the left and the
right bed boards 12 to
the left side panel 2and
to the right side panel
1through 60mm wood
screw A.
Use the Allen key O.
Rotate the construction
of the bed at 90 degrees
like shown on the picture.
Attaching panels
Screw the bottom panels
13 to the left crossbar
10 , to the right crossbar
10 and to the middle
crossbar 11 through
12mm wood screw N.
Step 7
Step 6
7
12
12
1
13
13
13
10
10
10
11
8
8
8
8
2
A
A
A
A
A
A
O
A
A
A
N
N
NN
N
NN
N
N
N
N
N
N
N
N
N
N
N
90

8
Assembly Instructions
b: Position the mounting
plates Ionto the right
shelf partition 6and
screw them through
16mm wood screw M.
Position the door 7and
attach the hinges Hto
the mounting plates I
. Tighten the bolts of the
mounting plate to x the
hinges.
Note: You can choose
on which shelf partition
to attach the door - left or
right.
Step 8
Step 9
Attaching door
a: Insert the hinges H
and screw them to the
door 7through 16mm
wood screw M. Use the
pilot holes.
Position the handle J
and x it to the door 7
through 22mm bolt K
and a 9mm washer L.
Hinges adjustment
a: To move the door up
or down: loosen screws
shown and move doors
to suit.
Once the door is aligned,
re-tighten the screws.
Continued on next page.
7
7
7
6
K
L
JMM
M
M
M
M
H
H
H
MI
I
M
H
H
a:
a:
b:

Assembly Instructions
Step 9 - continued
Step 10
Attaching stopper
Insert the stopper Ginto
the left shelf partition 6.
Note: You can choose
on which shelf partition to
attach the door stopper -
left or right.
6
G
G
b:
c:
b: To move the door
in or out: loosen screw
shown and move the
door to suit.
Re-tighten screw.
c: To move the door left
or right: loosen or tighten
the screw shown and
move the door to suit.
If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800
Domestic address or Home Retail Group Plc address.
Assembly is complete.
9