Aries 4499 User manual

ARIESAUTOMOTIVE.COM •NEED ASSISTANCE? •8 7 7. 2 8 7. 8 6 3 4 •4499-INS-RA •PAGE 1
INSTALLATION MANUAL 4499
Parts List
26" oval side bar
8Universal bracket
8Stainless steel bolt plate
32 Flat washer, M6
32 Nylock nut, M6
16 Flat washer, M8
16 Lock washer, M8
16 Hex head cap screw, M8
* Not all hardware may be used.
Some hardware is used for stainless
steel running boards only.
Additional Hardware*
24 T-bolt, M8
24 Flat washer, M8
24 Lock washer, M8
24 Hex nut, M8
* Aluminum side bars are supplied with
additional hardware. Quantities listed are in
addition to the standard supplied hardware.
Tools Required
Socket set Level
Socket extension --
Maintenance
To protect the product, wax after installing. Regular waxing is recommended
to add a protective layer over the finish. Do not use any type of polish or wax
that may contain abrasives that could damage the finish.
For polished, gloss and other smooth finishes,
polish may be used to clear small scratches and scuffs on the finish.
Mild automotive detergent may be used to clean the product. Do not use dish detergent, abrasive
cleaners, abrasive pads, wire brushes or other similar products that may damage the finish.
Product Photo
Front
Rear
Torque Specifications
M6 bolt 3 ft-lbs.
M8 bolt 7 ft-lbs.
Use above torque setting unless otherwise noted
Level of Difficulty
Easy
NOTICE
Before you begin installation, read all instructions thoroughly.
Proper tools will improve the quality of installation and reduce the time required.
To help prevent damage to the product or vehicle, refer to the specified
torque specifications when securing hardware during the installation process.
Product Registration and Warranty
CURT Group stands behind our products with industry-leading warranties.
Provide feedback and help us to improve our products by registering your purchase at:
warranty.curtgroup.com/surveys

ARIESAUTOMOTIVE.COM •NEED ASSISTANCE? •8 7 7. 2 8 7. 8 6 3 4 •4499-INS-RA •PAGE 2
Step 1
Locate the four mounting locations along the
bottom edge of each side of the vehicle body.
Step 2
Starting on the front passenger side,
remove the plastic plugs covering
the threaded inserts.
Secure the bracket to the body panel
using two M8 hex bolts, lock washers
and flat washers.
Snug the hardware,
but do not fully tighten.
Step 3
Repeat step 2 for the remaining
three locations on the passenger side.
Repeat this process for the four mounting
locations on the driver side of the vehicle.

ARIESAUTOMOTIVE.COM •NEED ASSISTANCE? •8 7 7. 2 8 7. 8 6 3 4 •4499-INS-RA •PAGE 3
Step 5 (Stainless Steel Side Bars Only)
Insert a bolt plate into the bottom
channels of the side bar, as shown.
Slide the bolt plate forward to the
front bracket and insert the studs
through the bracket cradle. Repeat
this for the rear brackets.
Secure the side bar to the brackets
using M6 flat washers and nylock nuts.
Snug the hardware,
but do not fully tighten.
Step 6 (Aluminum Side Bars Only)
Insert three t-bolts into the bottom
channels of the side bar, as shown.
Slide the bolts forward to the front bracket
and insert them through the bracket cradle.
Repeat this for the rear brackets.
Secure the side bar to the brackets using
M8 flat washers, lock washers and nuts.
Snug the hardware,
but do not fully tighten.
Step 4
Carefully place the side bar on
the brackets with the larger step
pad toward the front of the vehicle.

ARIESAUTOMOTIVE.COM •NEED ASSISTANCE? •8 7 7. 2 8 7. 8 6 3 4 •4499-INS-RA •PAGE 4
Step 8
Congratulations on the installation of
your new ARIES 6" oval side bars.
With the side bars installed, periodic
inspections should be performed to ensure
all mounting hardware remains tight.
To protect your investment, see the
'Notes and Maintenance' section on
the first page of this instruction manual.
Step 7
Starting on the driver side, adjust
the sidebar to the desired location.
With the sidebar in position, it is recommended
to tighten all brackets to the vehicle first,
followed by the side bar connections.
See page one for recommended
torque specifications.
Repeat this process on the
passenger side of the vehicle.