Arrow 81100 User manual

Storage Cube
ASSEMBLY INSTRUCTIONS
ITEM NO.: 81100 White

Assembly InstructionsStorage Cube 2
1. Read the instructions carefully before beginning the assembly process to ensure proper assembly
of this product. Please open and inspect the contents of box(es) to see that all parts and hardware
are included.
2. Tools Required
180°
Screw cam bolts flush as
illustrated.
Press cam into hole until flush with
surface. The arrow direction must
be in the direction of the hole.
Insert bolt through pre-drilled
hole in edge of panel.
Turn clockwise to lock cam with bolt.
General Assembly Guidelines
3. Understanding How the Cam Fastener Works
Tip: place a small bit of WD-40 or similar
lubricant into the pre-installed cam bolt
holes to help the cam bolts screw in better.
4. Glue provided is to secure wood dowels in place and is optional. If glue is used during assembly,
locate the appropriate hole for the dowel, place a small amount of glue in the hole and insert the
dowel. Wipe away excess glue immediately. It is not necessary to glue the other end of the dowel
when attaching to other parts.
Use and Care
Your cabinet normally requires a minimum amount of maintenance; however, it is worth noting the
following for regular cleaning:
To remove marks and enhance the surface, wipe with a gentle all-purpose cleanser. DO NOT use
ammonia-based, harsh chemicals or abrasive cleaning agents. Wipe dry immediately.
Phillips Screwdriver Hammer Electric Screwdriver
Torque set to 3-5

Assembly InstructionsStorage Cube 3
Parts List: Panels
ITEM DESCRIPTION QTY. PACK.
ATop Panel 1 1 of 1
GBottom Panel 1 1 of 1
XCenter Panel 1 1 of 1
ZOutside Panel 1 1 of 1
OSide Panel 1 1 of 1
O1 Side Panel 1 1 of 1
ITEM DESCRIPTION QTY. PACK.
O2 Center Panel 1 1 of 1
F1 Wide Shelf Panel 1 1 of 1
F2 Shelf Panel 1 1 of 1
F3 Spool Holder Panel 1 1 of 1
E1 Shelf Panels 2 1 of 1
A
E1
E1
X
O
F1
F3
O2
F2
O1
Z
G

Assembly InstructionsStorage Cube 4
Parts List: Hardware
TIP: Keep all the parts in their individually labeled bags. This will make finding parts easier as you assemble your cabinet.
6x35 Cam Bolt x32
c1
8x30 Dowel Pin x36
d1
5⁄8“ Cam Cover x32
c2
3.5x12 Screw x4
s2
4x16 Screw x16
s1
Peg x8
p1
Plastic Support x4
p
Caster x4
t1
6x50 Dowel Pin x60
d2
Metal Bar x2

Assembly InstructionsStorage Cube 5
Part 1: Main Cabinet
Congratulations and welcome to Arrow Sewing Furniture! We can’t wait to get your brand new Storage Cube up and running.
Please contact our Customer Service Team at 1-800-533-7347 ext. 1 during normal business hours with any assembly related
questions.
G
t1
s1
G
c1
Caster x4
t1
4x16 Screw x16
s1
6x35 Cam Bolt x8
c1
Attach t1 Casters to the underside
of Panel G, securing in place with s1
Screws.
Attach c1 Cam Bolts to the top side of
Panel G.

Assembly InstructionsStorage Cube 6
Part 1: Main Cabinet
O
O1
F1
6x35 Cam Bolt x4
c1
8x30 Dowel Pin x16
d1
c1
c1
d1
d1
d1
Attach 2 c1 Cam Bolts to Panel O.
Insert 6 d1 Dowel Pins into the edges
of Panel O.
Attach 2 c1 Cam Bolts to Panel O1.
Insert 6 d1 Dowel Pins into the edges
of Panel O1.
Insert 4 d1 Dowel Pins into the edges
of Panel F1.

Assembly InstructionsStorage Cube 7
Part 1: Main Cabinet
O1
O
F1
NOTE: These illustrations show upside down assembly of the
cabinet. This is necessary to better reach cam locks and to
attach the bottom.
Assemble Panels O1, F1 and O by inserting cam bolts into cam
locks. Tighten cam locks and apply c2 Cam Covers.
5⁄8“ Cam Cover x4
c2

Assembly InstructionsStorage Cube 8
Part 1: Main Cabinet
X
X
6x35 Cam Bolt x8
c1
8x30 Dowel Pin x4
d1
NOTE: Both sides of Panel
X must be prepared for
assembly.
Side 1
Side 2
Panel X Side 1:
Attach 4 c1 Cam Bolts
Insert 4 d1 Dowel Pins
Panel X Side 2:
Attach 4 c1 Cam Bolts

Assembly InstructionsStorage Cube 9
Part 1: Main Cabinet
X
O1
F1
O
5⁄8“ Cam Cover x4
c2
Insert cam bolts on Side 2 of Panel X
into cam locks on Panels O1, F1 and
O.
Tighten cam locks and apply c2 Cam
Covers.

Assembly InstructionsStorage Cube 10
Part 1: Main Cabinet
O2
8x30 Dowel Pin x4
d1
Insert d1 Dowel Pins into the edges
of Panel O2.
d1

Assembly InstructionsStorage Cube 11
Part 1: Main Cabinet
O2
O1
O
X
5⁄8“ Cam Cover x2
c2
Insert cam bolts on Side 1 of Panel X
into cam locks on Panel O2.
Tighten cam locks and apply c2 Cam
Covers.

Assembly InstructionsStorage Cube 12
Part 1: Main Cabinet
F2
F3
d2
d1
d1
8x30 Dowel Pin x8
d1
6x50 Dowel Pin x18
d2
Insert d1 Dowel Pins into the edge of
Panel F2.
Insert d1 Dowel Pins into the edges of Panel F3.
Insert d2 Dowel Pins into the predrilled holes on Panel F3.
TIP: Glue will hold dowels securely in place. If you wish to reconfigure dowel placement in the future, do not use glue.

Assembly InstructionsStorage Cube 13
Part 1: Main Cabinet
O2
X
F2
F3
5⁄8“ Cam Cover x2
c2
Attach Panels F2 and F3 to Panel X as shown
below.
Tighten cam locks and apply c2 Cam Covers.

Assembly InstructionsStorage Cube 14
Part 1: Main Cabinet
Z
d1
c1
6x35 Cam Bolt x4
c1
8x30 Dowel Pin x4
d1
Attach c1 Cam Bolts to Panel Z.
Insert d1 Dowel Pins into the edge of
Panel Z.

Assembly InstructionsStorage Cube 15
Part 1: Main Cabinet
O2
F2
F3
Z
5⁄8“ Cam Cover x4
c2
Attach Panel Z to Panels O2, F2 and F3
as shown here.
Tighten cam locks and apply c2 Cam
Covers.

Assembly InstructionsStorage Cube 16
Part 1: Main Cabinet
G
O
O1
X
Z
5⁄8“ Cam Cover x8
c2
Attach Panel G, lowering on to Panels Z,
X, O and O1 as illustrated.
Tighten all cam locks and apply c2 Cam
Covers.
Turn the cabinet over onto its wheels.

Assembly InstructionsStorage Cube 17
Part 1: Main Cabinet
A
6x35 Cam Bolt x8
c1
Attach c1 Cam Bolts to Panel A.

Assembly InstructionsStorage Cube 18
A
Z
O
X
O1
Part 1: Main Cabinet
5⁄8“ Cam Cover x8
c2
Attach Panel A, lowering on to Panels Z,
X, O and O1 as illustrated.
Tighten all cam locks and apply c2 Cam
Covers.

Assembly InstructionsStorage Cube 19
O
O1
p
p
s2
Part 1: Main Cabinet
Plastic Support x4
p
3.5x12 Screw x4
s2
Using s2 Screws, attach p Plastic Support pieces
to the inside edges of Panels O and O1.
p
Nestle the Metal Bars into the pPlastic
Support pieces as shown above.
Metal Bar x2

Assembly InstructionsStorage Cube 20
Part 1: Main Cabinet
Peg x8
p1
Z
X
p1
Insert p1 Pegs into pre-drilled Panels X
and Z, taking care to be sure the pegs are
evenly spaced.
E1
E1
Slide Panel E1 shelves into place as shown.