Arrow SUZI 800 User manual

SUZI
STORAGE SIDEKICK
OWNER’S MANUAL
Where Creativity Meets Color!
Assembly Instructions
IMPORTANT: Please read these instructions before assembling!
Model Numbers:
800 Oak
801 White
802 Cherry
803 Black
804 Pistachio Green
809 Blue

Thank you for your purchase of an Arrow Sewing Cabinet!
Our products have a 15 day warranty for any shipping damages and a one year
warranty from the date of shipment for manufacturer’s defects. The warranty does
not cover damage caused by abuse, misuse, alteration, accident or neglect of the
product. The warranty does not cover damage as a result of moving the cabinet fully
loaded. Under the terms of this warranty the repair and replacement of any parts
shall be at the discretion of the company or their designated representatives.
Replacement Part Shipping Policy:
Arrow is committed to preserving our natural resources by reducing our use of
excess packaging and lowering our fossil fuel consumption through the elimination of
unnecessary deliveries. To that end, we ship all replacement parts out at the same
time. Please help us in this endeavor by reviewing ALL parts in ALL boxes for damage
before calling us to request replacement parts. As part of this policy, the rst request
for replacements parts will ship for free. Additional requests will be shipped at the
customer’s expense.
If you have any questions, please call or email us at:
1-800-533-7347
[e-mail]
Check out our website for pictures and frequently asked questions at:
www.arrowcabinets.com
READ THIS PAGE FIRST
WARRANTY

Assembly Instructions
SUZI Storage Sidekick Page 1
Left Side Top Drawer Front
Drawer Front/Back x7
Right Side Drawer Side x8
Top
Bottom
Door
If any of these parts arrived damaged, please call us at
1-800-533-7347 and we will send a replacement part out.
For additional strength dab wood glue on tip of screws
before attaching.
Drawer Bottom x4
Back
NOTE: To assure proper handling of replacement parts
please include the following information:
• Model Number of Unit - 800 (Oak)
801 (White)
802 (Cherry)
803 (Black)
804 (Green)
809 (Blue)
• Production ID Number
• Number of Part Required
• Your Name, Address, and Phone Number
Notice to Customer:
Before beginning assembly, remove all parts from
the carton. Please review the illustrations below to
determine that all parts are Included.
For assembly or operating assistance, or to report any
missing or damaged parts, you may call or write to:
[e-mail]
1-800-533-7347
Arrow Cabinets
P.O. Box 307, Delavan, WI 53115
TO ORDER REPLACEMENT PARTS CALL
1-800-533-7347
Parts are labeled with capital letters. To reference letters,
turn to the Wood Parts List in the back of your manual.
Wooden Materials
B
H
C
I
D
K
E
L
F
G
B
H
C
I
D
K
K
K
K
E
L
L
L
F
G

Assembly Instructions
SUZI Storage Sidekick Page 2
Hardware Included
Tools required
#8x1/2”
Silver Panhead Screws x16
Drawer Stoppers x4
Door Hinge x2
Strike Plate x1
Door Magnet x1
Door Knob x2
Metal Dowels x4
#8x5/16”
Flathead Screws x4
#4x1/2”
Gold Flathead Screws x14
#4x1/2”
Bronze Flathead Screw x1
#6x5/8”
Gold Panhead Screws x2
#8/32x1”
Door Knob Bolt x2
Connecting Bolts x44
Cams x44 Drawer Runners x8
#6x1”
Flathead Screw x32
Note: Screws are included in the bag of parts they
will be used with.
*Items not drawn to scale.
Plate Casters x4
Phillips Screwdriver Hammer Electric screwdriver
Allen key x1

180°
Assembly Instructions
SUZI Storage Sidekick Page 3
Understanding How the “ARROW-LOC” Cam Fastener Works
Cabinet Assembly
Position bolt in
pre-drilled hole and
turn until tight.
Press cam Into pre-drilled
hole until flush with surface.
Insert bolt through pre-drilled
hole in edge of panel.
To lock, rotate cam
until tight, using
allen key provided
or screwdriver.
ARROW TOWARDS
HOLE IN EDGE!
FIG. 1.
Door Magnet
Door Hinge
Step 1. Place Top (E), Bottom (F), Back (B), Left
and Right Sides (C, D) on a flat protected surface
(to prevent scratching of part). Thread Connecting
Bolts (12 total) into pre-drilled holes (as shown In
FIG. 1). Install Cams (12 total) by pushing a Cam
into each hole flush with surface. The arrow on the
Cams should be turned to face the hole, in each
edge where the Connecting Bolts will enter, using
a regular screwdriver or Allen Key provided.
Connecting Bolts x12
Cams x12
B
C
D
E
F

Assembly Instructions
SUZI Storage Sidekick Page 4
DO NOT OVERTIGHTEN #6x1”
Flathead Screws. Make sure
the screw heads are flush
with plastic.
#6x1”
Flathead Screw x32
FIG. 2.
FIG. 3.
Metal Dowels x4
#8x5/16”
Flathead Screws x4
Step 3. Screw drawer stops (x4) into Right Side
Panel (D) above drawer runner using #8x5/16”
Flathead screws (x4). DO NOT tighten the screws
completely, leave 1/4” for up and down swivel of
the drawer runner.
Insert (4) metal dowels into pre-drilled hole next to
drawer stop.
Step 2. Attach Drawer Runners (x8) to Left and
Right Sides (C,D) using #6x1” Flathead Screws (x32).
Attach on Right Side (D) Door Hinges (x2) using
#4x1/2” Gold Flathead Screws (x6). Attach Door
Magnet (x1) on Left Side (C) using #6x5/8” Gold
Panhead Screws (x2) (as shown in Fig. 2). The
metal side of the magnet faces panel edge.
#4x1/2”
Gold Flathead Screws x6 #6x5/8”
Gold Panhead Screws x2
D
C
D

180°
Assembly Instructions
SUZI Storage Sidekick Page 5
Step 4. Attach Plate Casters (x4) to Bottom (F)
using #8x1/2” Silver Panhead Screws (x16) into
holes provided (as shown In FIG.4).
Step 5. With Cams facing inward, attach Left Side
(C) to Back (B), guide Connecting Bolts into holes
in Back (B), turn Cams to locked position. Attach
Right Side (D) to Back (B), guide Connecting Bolts
For additional strength dab wood glue on the tip of
screws before attaching.
FIG. 4.
FIG. 5.
Top End
#8x1/2”
Silver Panhead Screws x16
into holes in Back (B), turn Cams to locked position
(as shown in Fig.5). Sides and back will be flush at
the top.
Remember to tighten the
cams down on ALL pieces
once completed!
B
C
D
F

180°
Tapered edge facing forward.
Assembly Instructions
SUZI Storage Sidekick Page 6
Step 6. Place Top (E) on the floor, guide sides (C,D)
and Back (B) assembly onto Connecting bolts with
the opening facing the tapered edge of Top panel
(E), turn Cams to locked position. Attach Bottom
(F) w/casters, guide Connecting Bolts into holes
in sides (C,D), turn Cams to locked position (as
shown in FIG. 6).
Step 7. Laying Caddy on its Back (B), attach Door
(G) using #4x1/2” Gold Flathead screws (x8).
Attach Door Knob onto the Door (G) as shown
below in FIG. 7. Attach Strike Plate with #4x1/2”
Bronze Flathead screw (x1), to Door (G).
Note: Caddy is being assembled upside down.
FIG. 6.
FIG. 7.
Remember to tighten the
cams down on ALL pieces
once completed!
#4x1/2”
Gold Flathead Screws x8
#4x1/2”
Bronze Flathead Screw x1
#8/32x1”
Door Knob Bolt x1
Door Knob x1
E
F
B
C
D
G

Assembly Instructions
SUZI Storage Sidekick Page 7
Step 8. Thread Connecting Bolts (32 total) Into
pre-drilled holes in Top Drawer Front (Ix1) and
Drawer Front/Back (Lx7). Install Cams (32 total)
in Drawer side (Kx8) by pushing a Cam into each,
hole flush with surface (as shown in FIG. 8).
Step 10. Attach the Knob to the Top Drawer Front
(I) using 8/32x1” Bolt (x1) for Knob (as shown in
FIG. 10).
Step 9. Attach Drawer Sides (K) to Top Drawer
Front (I) and Drawer Front/Back (L). Align Drawer
Bottom grooves in Sides with Drawer Bottom
groove In Drawer Front (as shown in FIG. 9).
Slide Drawer Bottom (H) along grooves on the
Sides Into the Groove In Drawer Front (I,L).
Attach Drawer Back (L) to Drawer Side (K), guide
Connecting Bolts into holes in Drawer Side (K),
turn Cams to locked position.
FIG. 8.
The Drawers may now be insatalled into your cabinet.
Connecting Bolts x32
Cams x32
#8/32x1”
Door Knob Bolt x1
FIG. 9.
Door Knob x1
FIG. 10.
H
H
I
K
K
K
K
L
L
L
180°
I
K
L

Assembly Instructions
SUZI Storage Sidekick Page 8
Left Side
Top Drawer Front Drawer Front/Back
Right Side
Drawer Side
Top Bottom Door Drawer Bottom
Back
Wood Parts and Part Numbers
Ref. Description Part# Part# Part# Part# Part# Part#
Cabinet Model# 800 (Oak) 801 (White) 802 (Cherry) 803 (Black) 804 (Green) 809 (Blue)
BBack 003315 003252 003315C 003315B 003315G 003323B
CLeft Side 003314 004020 003314C 003314B 003314G 003323B
DRight Side 003313 003250 003313C 003313B 003313G 003313BL
ETop 003317 003254 003317C 003317B 003317G 003317BL
FBottom 003316 003253 003316C 003316B 003316G 003316BL
GDoor 003318 003255 003318C 003318B 003318G 003318BL
HDrawer Bottom 003162 003162 003162 003162 0033162 0033162
ITop Drawer Front 003320 003257 003320C 003320B 003320G 003320BL
LDrawer Front/Back 003323G 003322W 003322C 003322B 003322G 003322BL
KDrawer Side 003323 003323W 003323C 003323B 003323G 003323BL
B
H
C
I
D
K
E
L
F
G

Assembly Instructions
SUZI Storage Sidekick Page 9
Hardware Included with Part Numbers
#8x1/2” Silver Panhead Screws
Drawer Stoppers
Door Hinge
Strike Plate
Magnet
Door Knob
Metal Dowels
#8x5/16” Flathead Screws
#4x1/2” Flathead Screws
#4x1/2” Bronze Flathead Screws
#6x5/8” Gold Panhead Screws
#8/32x1” Bolt
Connecting Bolts
Manual
Cams
Drawer Runners
#6x1” Flathead Screw
Plate Casters
Item Description Part No.
A#8x1/2” Panhead Screw 002614
B#4x1/2” Flathead Screw 002705
C#8x5/16” Flathead Screw 002000
DDrawer Stopper 002001
E#6x1” Silver Flathead Screw 001325
F#6x5/8” Gold Panhead Screw 000083
GConnecting Bolts 002892
H#4x1/2” Bronze Flathead Screws 000916
IManual 003551B
JMetal Dowel 002002
KCam 000709
LPlate Caster 002190
MMagnet 001644
PDoor Hinge 002730
QDrawer Runner 002397
SStrike Plate 002192
TKnob Gold (Model 800/802) 003170
WKnob Silver (Model 801/803) 003165
X8/32x1” Bolt 003192
A
B
H
C
E
D
F
G
I
J
K
L
M
P
Q
S
T
X
W

P.O. Box 307 Delavan, WI 53115
1-800-533-7347
[e-mail]
www.arrowcabinets.com 04-18
Enhance your sewing experience with a custom-made
insert for your Arrow or Kangaroo cabinet. Inserts are
designed to reduce the gap between the machine
and cabinet opening. This provides an ergonomic
work surface for the free arm of the sewing machine,
allowing for straighter stitches, less fatigue and an
overall better experience using your machine and
cabinet.
Hydraulic Sewing Chair
Insert
Our sewing chairs are designed to provide comfort,
support, and the fashionable look you want for your
space. Our chairs are the perfect accessory for any
craft and sewing room and are oered in several fabric
and color options. ‘’They provide necessary lumbar
support and comfort for long term sewing. Arrow
chairs also have a hidden storage compartment under
the seat, perfect or hiding small notions, patterns, and
anything else you need.
Visit arrowcabinets.com for ordering information.
Accessories to Complete Your Sewing Experience
Custom Insert Arrow Sewing Chairs