Aspire ACTIVE AIR 8 User manual

USER MANUAL
ACTIVE AIR 8
ALTERNATING MATTRESS REPLACEMENT
lifecomfort
lifecomfort
PTM639300
Active Air 8 Alternating
Mattress Replacement - Single
PTM639310
Active Air 8 Alternating
Mattress Replacement
- King Single

2 3
lifecomfort
lifecomfort
lifecomfort
lifecomfort
Thank you for choosing this Aspire Active Air 8
Alternating Mattress Replacement.
This mattress replacement has been specifically
designed to oer safety, comfort and support.
It is important that you read this user manual
carefully before using your new mattress
replacement.
TABLE OF CONTENTS
1. Introduction
2. Safety Precautions
3. Product Safeguards
4. Product Overview
5. Assembly & Setup
6. Operation
7. Product Specifications
8. Cleaning
9. Maintenance & Storage
10. Troubleshooting
11. Warranty & Service
12. Service Log Book
4
6
7
8
9
13
22
23
24
25
26
27

4 5
lifecomfort
lifecomfort
lifecomfort
lifecomfort
WARNING! Indicates a potentially hazardous condition/situation. Failure to follow
designated procedures can cause either personal injury, component damage or
malfunction. On the product, this icon is represented as a black symbol on a white triangle
with a black border.
ALWAYS! These actions should be performed as specified. Failure to perform mandatory
actions can cause personal injury and/or equipment damage. On the product, this icon is
represented as a white infinity symbol on a black dot with a white border.
DO NOT! These actions are prohibited. These actions should not be performed at any time
or in any circumstances. Performing a prohibited action can cause personal injury and/
or equipment damage. On the product, this icon is represented as a white symbol with a
black circle and black slash.
PATIENT WEIGHT RANGE. This represents the range within which
the mattress overlay provides eective pressure redistribution
outcomes. Patient weight should NOT fall outside this range at any
time as this may void warranty and/or produce ineective patient
support outcomes.
1. INTRODUCTION
Product Description
The Aspire Lifecomfort Active Air 8 is an Alternating Mattress Replacement System used in the
prevention and relief for patients with, or vulnerable to, pressure ulcers. The Active Air 8 oers patients
a comfortable and relaxing support surface by using the established principles of alternating therapy,
which can both prevent skin breakdown and enhance healing.
The mattress overlay pump features a digital pressure adjustment function, mode selections and
audiovisual alarms.
The overlay features a multi-stretch PU coated fabric cover (with high MVTR) along with 17 x alternating
air cells, 3 x static head cells and a rapid release twist CPR Valve for use in the event of a CPR
emergency.
Key Features
• Patient weight range of this mattress replacement is 30-200kg, this should not be exceeded at any
time
• AutoLock – The control panel automatically locks if not touched for 30 seconds preventing accidental
changes to modes and settings
• AutoProtect - When the head of the bed is raised to 45ºor more, air pressure automatically increases
to prevent bottoming out
• AutoDetect - Based on the patients weight and size, appropriate pressure output is automatically set,
ensuring optimal care and protection
• 24 Hour Transport - In the event of a power failure, patients can remain on the inflated surface for up-
to 24 hours
• Easy-to-read LCD - Clear LCD screen provides clear and concise information on cycle time selections,
as well as operating mode and fault conditions
•Multi-stretch, Vapour Permeable Cover – Easy to clean cover is multi-stretch and breathable,
reducing friction and shear whilst optimising skin microclimate
• Welded Seams & Zip Protection – Prevents fluid and bacterial ingress into the system, facilitating
stringent infection control measures
• Rapid Release CPR – Allows quick deflation for cardio-pulmonary resuscitation in emergency
situations
• Audible & Visual Alarms – Sta are immediately alerted if a problem occurs, maximising peace of
mind and reducing patient risk
•Low Noise Pump – Digital control unit features innovative pump technology to reduce vibration and
facilitate improved patient sleep quality
• Variable Cycle Times – A choice of 10, 15, 20, 25 or 30 minute cycles to meet the needs and comfort
requirements for a wide range of patients
• Simple Cell Connections – O-ring connections make maintenance hassle and tool free
• Hassle Free Pump Maintenance – Modular pump design ensures pumps can be fixed and returned to
service quickly with minimal downtime
SYMBOLS USED IN THIS MANUAL
The symbols below are used throughout this user manual and on the product to identify warnings and
important information. It is very important for you to read them and understand them completely.
Range is 30-200kg
The Aspire Active Air 8 is an electrically operated Alternating Mattress Replacement oering a suite of
features for a patient at high risk of pressure injury. Ease of use, functionality, serviceability
and cleaning practicality are key features of dynamic mattress replacement system.
Clinical Applications and Area of Use
This Alternating Mattress Replacement is appropriate for adult patient care and should only be used
under the instruction of a carer or health professional where concerns exist around patient safe use.
Intended Use
The Aspire Lifecomfort Active Air 8 Alternating Mattress Replacement is intended to help and reduce the
incidence of pressure ulcers while optimising patient comfort. The Active Air 8 may be used in a variety of
environments included, but not limited to in home care, aged care and hospital.

6 7
lifecomfort
lifecomfort
lifecomfort
lifecomfort
2. SAFETY PRECAUTIONS
This user manual outlines the intended use of the Aspire Active Air 8 Alternating Mattress Replacement,
the intended use constitutes how to achieve maximum comfort whilst maximising safety and eciency
for care sta and patients alike.
It is IMP ORTANT that this user manual is read in its entirety prior to operating the Replacement. The
manual is designed to ensure that patients are equipped with the information required to competently
and responsibly operate the replacement and pump.
It is recommended that the user manual be kept in an easily accessible place for quick reference.
If required, Aidacare product specialists can provide additional training.
All WARNINGS and CAUTIONS within this manual should be strictly adhered to. Failure to do so could
result in harm to the patient or operator.
CAUTIONS highlighted throughout this manual identify possible hazards in procedures or conditions,
which if not followed correctly could result in equipment damage, or failure.
WARNINGS highlighted throughout this manual identify possible hazards in procedures or
conditions which if not followed correctly could result in serious injury, or fatality.
General
• Electrical equipment can be hazardous if used incorrectly
• Residual current devices (RCD) are not supplied with Active Air 8 Replacements. Please consult with
your Biomedical Engineer/advisor concerning RCD requirements
• The clinically qualified person responsible should consider the age, size and condition of the
patient before using the Alternating Mattress Replacement
• The maximum safe working load of the Active Air 8 is 200kg with a safe patient range of 30-200kg
• This replacement is not to be used on top of a pre-existing support surface. This is a Mattress
Replacement so there is no need for a static foam mattress or pressure safety underlay to be located
underneath, this Replacement can go directly onto the bed platform
• Power Cord Protection – L shaped connection coupled with the protector function, significantly
reduce the risk of the power cord becoming loose and getting damaged
• Cable Management – Cords are retained within the replacement so the risk of tripping and cord
pinching is eliminated
• If placed in static mode, after 20 minutes the system will fall back to alternating mode ensuring
maximum patient protection and pressure management
• Cell retention band prevents the inadvertent movement or seperation of the cells that could lead to
friction and shear
3. PRODUCT SAFEGUARDS
SAFEGUARD DESCRIPTION
WARNING!
To reduce the risk of
electrocution
1. Occupants should not operate the product at any time. Always ensure that
the pump is unplugged when not in use.
2. Do not disassemble the pump at any time.
3. Do not place or store the pump close to water or any other liquid.
4. Do not submerge the pump in water or any other liquid.
5. Do not make contact with the pump if it has come into contact with water or
any other liquid, unplug immediately.
WARNING!
To reduce the risk of
burn, electrocution,
fire or injury to the
patient
1. The mattress must be operated by connecting it to the pump ensuring that
it is not turned o or unplugged whilst in use.
2. Always ensure that warning labels are adhered to ensuring that voltage
is correct, approved power cords are used and that Children & Animals
do not come into contact with the packaging materials that could cause
suocation.
3. Equipment is not suitable to be used in the presence of a flammable
anaesthetic mixture with air, oxygen or nitrous oxide.
4. Keep away from sharp objects.
5. Close supervision is necessary when this product is used by, on, or near
children or people with disabilities.
6. Use this product only for its intended use as described in the user manual.
Do not use attachments not recommended by the Aidacare.
7. Do not operate this product if the pump has a damaged power cord or
plug, not working properly, has been dropped or damaged or dropped/
submerged into water or another liquid. If this occurs, contact your Aspire
dealer immediately for a product inspection.
8. Keep the power cord away from hot surfaces.
9. Do not block the air valves/tubes/openings by placing on a soft surface such
as a bed or couch. Keep all valves/tubes/openings responsible for air flow,
clear of all lint, hair and other particles.
10. Do not insert any object into the air valves/tubes/openings.
11. Avoid dropping pump and do NOT mount any heavy objects on top of it.
12. Place the power cord and air hoses at the occupant’s foot area to avoid
strangling of the occupant’s neck.
13. Avoid electromagnetic interference by ensuring that electro-magnetic or RF
generated equipment is kept away from the occupant.
14. Over the course of operation, the pump will generate a small amount of
heat. Do not maintain skin contact with pump for more than 1 minute at a
time. Never cover the pump when it is in use, ensure air flow to pump is free
at all times.
15. During a power outage or loss (even if only temporary) the pump will stop
and power failure alarm will sound for up to 20 seconds. The pump will
return to normal operation once the power supply is resumed.
16. Connect this product to a properly grounded outlet only.
17. Avoid the risk of electrocution by grounding the ground pin with grounding
power outlet.
18. The EMC specification is compliant with all regulations and requirements.
For power leads with a ground pin, the connection with properly grounded
power outlets will supress the EMC eect. The pump will work correctly for
power leads that are not grounded.
19. Connecting auto-detection should only be performed by the operator and
not the occupant.

8 9
lifecomfort
lifecomfort
lifecomfort
lifecomfort
The Aspire Active Air 8 Alternating Mattress Replacement has been designed for the aged care and
hospital environment. Please take the time to familiarise yourself with the key components shown below:
4. PRODUCT OVERVIEW
Simple O-ring
cell connector’s
Multi-stretch vapour
permeable top cover
Intuitive cable
management
Low noise pump Durable
base cover
Alternating cells
Side safety
handles
1. Place the 8 inch Mattress Replacement directly onto the mattress platform, ensuring that there is no
foam mattress or pressure safety underlay underneath. Ensure the air pump hose is towards the
FOOT END of the bed so it lines up with the pump
2. Secure the replacement onto the mattress platform by fastening and securing the nylon straps and
plastic buckles
5. ASSEMBLY & SETUP
2
1
Box Contains:
1. Digital Mattress Pump
2. Mains Power Cable
3. 8 inch Mattress Replacement
4. Transport Carry Bag
5. User Manual
When opening the carton, ensure it is done in a
safe and careful manner. DO NOT USE a box cutter
or sharp implement as this may damage
the product.
Rapid release CPR

10 11
lifecomfort
lifecomfort
lifecomfort
lifecomfort
3. Ensure the CPR valve is at CLOSE position
4. Position the pump on the FOOT END of the bed end. The spring hanger bracket assembly will
self-adjust onto the footboard to secure it in place
5. Remove the plastic protector cap from the end of the air hose
6. Firmly push the hose connector into the side of the pump until a notable ‘click’ sound is heard
7. Connect the detection cable to the pump until a notable ‘click’ sound is heard
8. Connect the mains power cable to the pump ensuring that the power switch remains switched OFF
CLOSE OPEN

12 13
lifecomfort
lifecomfort
lifecomfort
lifecomfort
6. OPERATION
Aspire Active Air 8 Alternating Mattress Replacements are powered by a digital pump which can be
controlled with the adjustment control panel.
Various modes can be set on the digital pump to ensure maximum comfort and pressure redistribution
for the patient.
Adjustment Control Panel Operation
Power On/Ready for Use
Auto Firm
Pressure Mode Adjustment
Automatic Pressure Adjustment For Specific Patient
Function Lock Out
Mute
Low Pressure
Power Failure
Service Required
Auto Protect - functioning when upper half of mattress exceeds 45º(no audio or visual prompt)
1
2
3
4
5
6
7
8
9
2
1
3
6
4
5
7
8
9
9. Press down in the L shape power cord protector to secure the power cord in place
10. Plug the mains power cable into the electrical power socket
11. Set mode suitable for patient, (Refer to OPERATION for further details on how to
adjust the mattress replacement)
WARNING! DO NOT place the pump unit in an area where the power cord can become pinched
or stuck
WARNING! The digital pump is only to be used with the Aspire Active Air 8 and not any
other system

14 15
lifecomfort
lifecomfort
lifecomfort
lifecomfort
Power On/Ready For Use
The power switch for the pump is located on the side of the pump.
1. Press the power switch up on the side of the pump and press the ON/OFF button on the
control panel
2. The ‘POWER’ LED will illuminate and inflate to normal pressure
1 2
POWER
STANDBY
ON/OFF
POWER
STANDBY
ON/OFF
Auto Firm
This feature allows the mattress to inflate to maximum pressure automatically, specifically beneficial
for patient ingress and egress. It can also be used as a tool to completely inflate the mattress.
1. Press the AUTO FIRM button down, LED light will illuminate and the mattress will start to firm to
maximum level
2.Once the maximum level of pressure is reached, the pump will automatically switch into the
previous selected mode and comfort level after 20 minutes
AUTO FIRM
1
Pressure Mode Adjustment - Static, Alternating & Constant Low
Pressure
Static Mode
1. Press MODE button until the ‘STATIC’ LED light is illuminated
2. Static mode will automatically fall back to ‘ALTERNATING’ mode after 20 minutes
Alternating Mode
1. Press MODE button until the ‘ALTERNATING’ LED light is illuminated
2. Toggle the alternating cycle times (10, 15, 20, 25 or 30 minutes) by pressing the ‘Cycle’ button,
the cycle time will be displayed on the LED screen
Constant Low Pressure
1. Press the MODE button until the CLP LED light is illuminated
2. The mattress will retain 50% of the selected pressure in the static mode for the selected
pressure that has been set for the patient
1
1
2
2
1

16 17
lifecomfort
lifecomfort
lifecomfort
lifecomfort
Comfort (Pressure) Adjustment
1. Press the FIRM button to increase pressure
2. Press the SOFT button to decrease pressure
NOTE: The below table indicates the suggested pressure according to the patients weight. This is
intended as a guide only as patient body shapes vary.
1
1 2
Auto Adjust
Patient Weight (KG)
30 50 70 90 110 130 150 175 200
lifecomfort
lifecomfort
ACTIVE
AIR 5
FIRM
AUTO
ADJUST
CYCLE TIME
MINUTES
LOW PRESSURE
POWER FAILURE
FLASHING = CYCLE
ALTERNATING STATIC CLP
PRESS &
HOLD
MODE
AUTO FIRM
POWER
STANDBY
MUTE
SOFT
MAX
CONSTANT
LOW
PRESSURE
ACTIVE
ON/OFF
175
(PRESS BOTH BUTTONS)
lifecomfort
lifecomfort
ACTIVE
AIR 5
FIRM
AUTO
ADJUST
CYCLE TIME
MINUTES
LOW PRESSURE
POWER FAILURE
FLASHING = CYCLE
ALTERNATING STATIC CLP
PRESS &
HOLD
MODE
AUTO FIRM
POWER
STANDBY
MUTE
SOFT
MAX
CONSTANT
LOW
PRESSURE
ACTIVE
ON/OFF
175
(PRESS BOTH BUTTONS)
Auto Adjust
Correct pressure levels are automatically set (dependent on patient weight) when activating the Auto
Adjust feature.
1. Press and hold down the SOFT & FIRM buttons, the LED light will flash and start detecting
correct pressure
2. Once adjusted, the LED light will stop flashing and will remain illuminated indicating the
pressure has been adjusted for the specific user
3. The mattress pressure can be manually adjusted should the patient desire a dierent
comfort level
Auto Protect
Additional air is pumped under the mattress pelvic region when the bed backrest angle is raised to
prevent patient bottoming out. This is also reerred to as a fowler function.
1. Auto Protect will be triggered when the upper half of the mattress is elevated and exceeds an angle
of 45º with 15mmHg of increased pressure from the pump to prevent bottoming out
2. Once the upper half of the mattress falls back to under 45ºof elevation, the pump will revert to the
previous mode/setting
lifecomfort
lifecomfort
ACTIVE
AIR 5
FIRM
AUTO
ADJUST
CYCLE TIME
MINUTES
LOW PRESSURE
POWER FAILURE
FLASHING = CYCLE
ALTERNATING STATIC CLP
PRESS &
HOLD
MODE
AUTO FIRM
POWER
STANDBY
MUTE
SOFT
MAX
CONSTANT
LOW
PRESSURE
ACTIVE
ON/OFF
175
(PRESS BOTH BUTTONS)
lifecomfort
lifecomfort
ACTIVE
AIR 5
FIRM
AUTO
ADJUST
CYCLE TIME
MINUTES
LOW PRESSURE
POWER FAILURE
FLASHING = CYCLE
ALTERNATING STATIC CLP
PRESS &
HOLD
MODE
AUTO FIRM
POWER
STANDBY
MUTE
SOFT
MAX
CONSTANT
LOW
PRESSURE
ACTIVE
ON/OFF
175
(PRESS BOTH BUTTONS)
1 2

18 19
lifecomfort
lifecomfort
lifecomfort
lifecomfort
2
1
Power Failure
1. If the control pump senses a power failure, the ‘POWER FAILURE’ LED light will illuminate
2. Refer to the troubleshooting sticker on the base of the pump to identify if there is a quick and
easy solution, if not please contact your Aspire dealer immediately
Service Required
1. If the control pump senses a fault or issue, the service LED light will illuminate
2. Refer to the troubleshooting sticker on the base of the pump to identify if there is a quick and
easy solution, if not please contact your Aspire dealer immediately
FLASHING =
LOW PRESSURE
FAILURE
POWER FAILURE
1
2
1 2
1 2
1 2
Mute
1. Press mute button to nullify all alarms from the pump
2. If issue is not rectified, the mute button will automatically disable and the alarm will reactivate. This
is a safety function to ensure a prompt response when an issue or fault occurs
Low Pressure
If correct pressure is not achieved for the patient, the ‘LOW PRESSURE’ LED light will illuminate and an
alarm will sound.
1. If the control pump senses low pressure, the ‘LOW PRESSURE’ LED light will illuminate and
alarm
2. Refer to the troubleshooting sticker on the base of the pump to identify if there is a quick
and easy solution, if not please contact your Aspire dealer immediately
MUTE
Function Lock Out
Carers can lock out functions to ensure these are not accidentally toggled, impacting the operation of
the mattress for the particular patient.
1. Press and hold the function lock out button until the LED light is illuminated. When illuminated
the functions are locked out
2. To reverse this process, press and hold the function lock out button until the LED light is
OFF. When LED is OFF all functions are unlocked

20 21
lifecomfort
lifecomfort
lifecomfort
lifecomfort
General Operation
CPR
1. Locate the CPR switch which is located at the HEAD end of the bed
2. Open the CPR valve by twisting the cylinder to the RIGHT to the OPEN position
3. Locate the hose connector connected to the pump at the FOOT end of the bed
4. Disconnect the hose connector from the pump
7. PRODUCT SPECIFICATIONS
PUMP UNIT
Dimensions (mm) 320mm W x 230mm D x 130mm H
Weight (kg) 3.5kg
Cycle Times 10/15/20/25/30 minutes
Static Time 20 minutes
Auto Firm Time 20 minutes
Pump Output Pressure Range (mmHg) 25 to 60 (±5)
Power AC230 V 50Hz
Current 0.12 AMAX (@253V~)
Fuse Rating T1AL 25 0VAC
Frequency 50 Hz (230V)
Classification Class II
Type BF
Operation Environment 5ºC ~ 40ºC
15%RH ~ 93%RH (no condensation)
Storage Environment -25ºC ~ 70º
93%RH (no condensation)
Environment Pressure 70 kPa-101.3kPa
Environment Horizontal Pressure 3000m
Water and Dust Protection Classification IP21
AIR MATTRESS - SINGLE
Dimensions (mm) 2000mm L x 900mm W x 200mm H
Weight (kg) 8.9kg
Cell Material TPU
No. of Air Cells 20
Cover Material Multi-stretch PU coated fabric with high MVTR
Bottom Material Polyester-PU
Max Weight 200kg
AIR MATTRESS - KING SINGLE
Dimensions (mm) 2000mm L x 1050mm W x 200mm H
Weight (kg) 8.9kg
Cell Material TPU
No. of Air Cells 20
Cover Material Multi-stretch PU coated fabric with high MVTR
Bottom Material Polyester-PU
Max Weight 200kg
1 2
3 4
CLOSE OPEN

22 23
lifecomfort
lifecomfort
lifecomfort
lifecomfort
8. CLEANING
To ensure all infection control protocols are strictly adhered to, it is extremely important to follow the
below steps to keep the Aspire Lifecomfort Active Air 8 clean at all times.
Mattress Pump
• Wipe with a damp cloth that has been pre-soaked with a mild detergent
• Ensure pump is kept free of dust and other particles
DO NOT! Immerse or soak the mattress pump at any time
Mattress Cover
• To remove small spills or stains, wipe the mattress cover with a damp cloth that has been
pre-soaked with a mild detergent or single use disinfectant wipe
• To remove large spills or stains, the top cover should be completely removed and laundered as
per below procedure:
1. Remove top cover by unzipping all 4 x sides from the mattress base
2. Prewash top cover at up to 95°for 15 minutes
3. Main wash top cover at up to 95°for 15 minutes
4. Dry mattress cover prior to use by hanging up on a line/air dryer or on a low heat setting it can
be tumble dried for up to 90 minutes
5. Once dry, reattach top cover by zipping all 4 sides back onto the mattress base
DO NOT! Use phenol based products
WARNING! After cleaning, the mattress must be completely dried prior to use
WARNING! Do not dry mattress cover in direct sunlight to prevent wearing out of text on cover
9. MAINTENANCE & STORAGE
To ensure longevity of your Aspire Lifecomfort Active Air 8 Alternating Mattress Replacements, it is very
important that it is correctly stored and regularly maintained.
General
• Check mains power cable and plug for any abrasions or excessive wearing
• Check mattress cover for signs of wear or damage
• Check air hoses for any kinks or breakages
Fuse Replacement
• Disconnect the mains power if there is a blown fuse
• Remove the cover on the side casing of the pump
• Remove old fuse and reinsert a new fuse, fix in place with the cover
WARNING! Only use fuse supplied by your Aspire Dealer, ensuring it has the correct rating and
specification
Air Filter Replacement
• Remove the cover on the rear casing of the pump
• Remove old filter and reinsert a new filter, fix in place with the cover
NOTE: If the filter does not require replacement, it can be cleaned by being washed gently with a mild
detergent and warm water. Ensure the filter is dry prior to installing back into mattress pump.
WARNING! Only use filter supplied by your Aspire Dealer, ensuring it has the correct rating and
specification
Storage
• Release all air from mattress by OPENING CPR valve and disconnecting mattress hose from pump
• Lay the mattress out flat & roll from HEAD end towards FOOT end
• Tighten mattress straps into clamps to prevent mattress unrolling
• Packing strap can then be stretched around the rolled mattress to prevent unrolling.
• Wrap power cord around the mattress

24 25
lifecomfort
lifecomfort
lifecomfort
lifecomfort
10. TROUBLESHOOTING
PROBLEM SOLUTION
Pump will not
connect with
mattress
• Check mattress and pump are compatible, only digital Aspire pumps are to
be used with this system
• Check plastic transport cap has been removed and ensure the connection is
not broken
• If problem persists, contact your Aspire dealer
Pump not working
• Check pump is connected to mains power
• Check power switch is in the ON position
• If problem persists, contact your Aspire dealer
Power failure
• Check pump is connected to mains power
• Check power switch is in the ON position
• If problem persists, contact your Aspire dealer
Low pressure LED
light flashing/alarm
is going o
• Check CPR valve is in CLOSED position
• Check air hoses/tubes are tightly secured
• Check all coupling connections along the mattress are secured
• If problem persists, contact your Aspire dealer
Pump is on but
mattress will not
alternate
• Ensure the mattress is inflated
• Check if ALTERNATING mode is ON
• Check if SERVICE REQUIRED LED, if yes, contact your Aspire dealer
Alarm is sounding • Press mute for system to be verified
• If alarm continues to sound, contact your Aspire dealer
Noisy pump • Check pump is mounted correctly and flat against FOOT end of bed
• If noise persists, contact your Aspire dealer
Bottoming out but
no alarm
• Check pressure setting is correct for specific patient, adjust comfort dial
according to the patient weight range table on page 16
• Refer to ‘Low pressure light flashing/alarm is going o’ point above
• If the problem persists, contact your Aspire dealer
As a quick reference tool, refer to the troubleshooting sticker on the base of the pump casing for
quick solutions. Always refer to the user manual where possible.
11. WARRANTY & SERVICE
Aspire Active Air 8 Alternating Mattress Replacements carry a comprehensive warranty as detailed
below. Please keep proof of purchase for proof of warranty commencement.
Consumer Warranty Against Defects:
Aidacare is bound by Australian Consumer Law in respect to Warranty Against Defects. A copy of
the Aidacare Warranty Against Defects statement is available on the Aidacare homepage at
www.aidacare.com.au. All warranty matters should be directed to Aidacare Customer Service on
1300 133 120.
Aidacare does not warrant against excessive or incorrect use, modification or
any situation that could not be deemed as fair wear and tear. This is a back to base warranty and does
not cover freight costs pertaining to the return of any items under warranty. Aidacare acknowledges and
conforms to all ACCC guidelines around consumer rights. For further information contact Aidacare on
1300 133 120 or email [email protected].
Aidacare will not warrant the safety and or correct functioning of products where any original
components have been changed or modified by non-Aidacare approved and trained service &
maintenance sta or external providers. Furthermore, safety is not guaranteed where components have
been replaced with non-original Aidacare approved parts. If any faults are detected upon receipt of
this product please phone Aidacare. Any faults that are detected during normal use should be reported
to Aidacare immediately to determine if warranty conditions apply and if so, the necessary repair or
replacement work to be completed.
Spare parts list is available upon request.
For servicing, preventative maintenance and any other questions regarding this or any other Aidacare
product please contact:
Aidacare Pty Ltd
4 Noonan Rd, Ingleburn NSW 2565
T – 1300 133 120
W – www.aidacare.com.au
E – [email protected]
Pump
2
Year
Warranty
1
Year
Warranty
Mattress Replacement

26 27
lifecomfort
lifecomfort
lifecomfort
lifecomfort
12. SERVICE LOG BOOK
YEAR 1
Service Type:
Condition Report:
Action taken:
Inspected By:
YEAR 2
Service Type:
Condition Report:
Action taken:
Inspected By:
YEAR 3
Service Type:
Condition Report:
Action taken:
Inspected By:
YEAR 4
Service Type:
Condition Report:
Action taken:
Inspected By:
YEAR 5
Service Type:
Condition Report:
Action taken:
Inspected By:
Date:
Date:
Date:
Date:
Date:
Signature:
Signature:
Signature:
Signature:
Signature:
YEAR 6
Service Type:
Condition Report:
Action taken:
Inspected By:
YEAR 7
Service Type:
Condition Report:
Action taken:
Inspected By:
YEAR 8
Service Type:
Condition Report:
Action taken:
Inspected By:
YEAR 9
Service Type:
Condition Report:
Action taken:
Inspected By:
YEAR 10
Service Type:
Condition Report:
Action taken:
Inspected By:
Date:
Date:
Date:
Date:
Date:
Signature:
Signature:
Signature:
Signature:
Signature:

lifecomfort
lifecomfort
Imported by:
AIDACARE P/L | 4 Noonan Rd, Ingleburn NSW 2565
T – 1300 133 120 | W – www.aidacare.com.au