ASRock Industrial IMB-1714 User manual

IMB-1714
IMB-X1714
User Manual
Version 1.1
Updated March 21, 2023
Copyright©2023 ASRockInd INC. All rights reserved.

Version 1.0
Published March, 2023
Copyright©2023 ASRockInd INC. All rights reserved.
Copyright Notice:
No part of this documentation may be reproduced, transcribed, transmitted, or
translated in any language, in any form or by any means, except duplication of
documentation by the purchaser for backup purpose, without written consent of
ASRockInd Inc.
Products and corporate names appearing in this documentation may or may not
be registered trademarks or copyrights of their respective companies, and are used
only for identication or explanation and to the owners’ benet, without intent to
infringe.
Disclaimer:
Specications and information contained in this documentation are furnished
for informational use only and subject to change without notice, and should
not be constructed as a commitment by ASRockInd. ASRockInd assumes no
responsibility for any errors or omissions that may appear in this documentation.
With respect to the contents of this documentation, ASRockInd does not provide
warranty of any kind, either expressed or implied, including but not limited to
the implied warranties or conditions of merchantability or tness for a particular
purpose.
In no event shall ASRockInd, its directors, ocers, employees, or agents be liable
for any indirect, special, incidental, or consequential damages (including damages
for loss of prots, loss of business, loss of data, interruption of business and the
like), even if ASRockInd has been advised of the possibility of such damages arising
from any defect or error in the documentation or product.
is device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
e terms HDMI®and HDMI High-Denition Multimedia Interface, and the HDMI
logo are trademarks or registered trademarks of HDMI Licensing LLC in the United
States and other countries.

WARNING
THIS PRODUCT CONTAINS A BUTTOON BATTERY
If swallowed, a button battery can cause serious injury or death.
Please keep batteries out of sight or reach of children.
CALIFORNIA, USA ONLY
e Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance
controlled in Perchlorate Best Management Practices (BMP) regulations passed by the
California Legislature. When you discard the Lithium battery in California, USA, please
follow the related regulations in advance.
“Perchlorate Material-special handling may apply, see www.dtsc.ca.gov/hazardouswaste/
perchlorate”
AUSTRALIA ONLY
Our goods come with guarantees that cannot be excluded under the Australian Consumer
Law. You are entitled to a replacement or refund for a major failure and compensation for
any other reasonably foreseeable loss or damage caused by our goods. You are also entitled
to have the goods repaired or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure. If you require assistance please call ASRockInd
Tel : [phone] ext.123 (Standard International call charges apply)
ASRockInd INC. hereby declares that this device is in compliance with the essential re-
quirements and other relevant provisions of related UKCA Directives. Full text of UKCA
declaration of conformity is available at: http://www.asrockind.com
ASRockInd INC. hereby declares that this device is in compliance with the essential re-
quirements and other relevant provisions of related Directives. Full text of EU declaration
of conformity is available at: http://www.ASRockInd.com
ASRockInd follows the green design concept to design and manufacture our products,
and
makes sure that each stage of the product life cycle of ASRockInd product is in line with
global
environmental regulations. In addition, ASRockInd disclose the relevant information
based on regulation requirements.
Please refer to https://www.asrockind.com/general/about.asp?cat=Responsibility for in-
formation disclosure based on regulation requirements ASRockInd is complied with.
DO NOT throw the motherboard in municipal waste. is product has been
designed to enable proper reuse of parts and recycling. This symbol of the
crossed out wheeled bin indicates that the product (electrical and electronic
equipment) should not be placed in municipal waste. Check local regulations
for disposal of electronic products.

Contents
1 Introduction 1
1.1 Package Contents 1
1.2 Specications 2
1.3 Motherboard Layout 5
1.4 I/O Panel 8
2 Installation 10
2.1 Screw Holes 10
2.2 Pre-installation Precautions 10
2.3 Installation of Memory Modules (DIMM) 11
2.4 Expansion Slots 13
2.5 Jumpers Setup 15
2.6 Onboard Headers and Connectors 18
3 UEFI SETUP UTILITY 24
3.1 Introduction 24
3.1.1 Entering BIOS Setup 24
3.1.2 UEFI Menu Bar 25
3.1.3 Navigation Keys 26
3.2 Main Screen 27
3.3 Advanced Screen 28
3.3.1 CPU Conguration 29
3.3.2 Chipset Conguration 32
3.3.3 Storage Conguration 36
3.3.4 Super IO Conguration 38
3.3.5 AMT Conguration 40
3.3.6 ACPI Conguration 44
3.3.7 USB Conguration 45
3.3.8 Trusted Computing 46
3.3.9 Thunderbolt (TM) Conguration 48
3.4 Hardware Health Event Monitoring Screen 49
3.5 Security Screen 51
3.6 Boot Screen 56

3.7 Exit Screen 58

1
IMB-1714_IBM-X1714
Chapter 1 Introduction
ank you for purchasing ASRockInd IMB-1714 / IMB-X1714 motherboard, a reli-
able motherboard produced under ASRockInd’s consistently stringent quality control.
It delivers excellent performance with robust design conforming to ASRockInd’s com-
mitment to quality and endurance.
In this manual, chapter 1 and 2 contain introduction of the motherboard and step-by-
step guide to the hardware installation. Chapter 3 contains the conguration guide to
BIOS setup.
Because the motherboard specications and the BIOS soware might be updated, the
content of this manual will be subject to change without notice. In case any modica-
tions of this manual occur, the updated version will be available on ASRockInd website
without further notice. You may nd the latest CPU support lists on ASRockInd web-
site as well.
ASRockInd website https://www.asrockind.com/
If you require technical support related to this motherboard, please visit our website for
specic information about the model you are using.
https://www.asrockind.com/support/index.asp
1.1 Package Contents
ASRockInd IMB-1714 / IMB-X1714 Motherboard (ATX (12-in x 9.6-in x 1.4-in, 30.5
cm x 24.4 cm x 3.6 cm))

2
1.2 Specications
Form Factor Dimensions ATX (12-in x 9.6-in x 1.4-in, 30.5 cm x 24.4 cm x 3.6
cm)
Processor
System
CPU Intel® 13th/12th Gen (Raptor Lake-S/Alder Lake-S)
Core™ Processors, up to 125W
Chipset Intel® Q670 (IMB-1714)
Intel® W680 (IMB-X1714)
Socket LGA1700
BIOS AMI SPI 256 Mbit
Expansion
Slot
PCIe
2 x PCIe Gen5 Slots (PCIE1/PCIE4:single at
x16(PCIE1); dual at x 8 (PCIE1) / x 8 (PCIE4))
(PCIE1: Supports Riser card x8/x8)
2 x PCIe x4 (Gen4)
3 x PCIe x1 (Gen3)
M.2
1 x M.2 (Key E, 2230) with PCIe x 1, USB 2.0 and
CNVi for Wireless
1 x M.2 (Key B, 3042/3052) with PCIe x 1, USB 3.2
Gen1, USB 2.0 and SIM for 4G/5G
SIM Socket 1 x SIM socket connected to M.2 Key B
Memory
Technology
DDR5 4400 MHz (2DPC - 1DIMM)
DDR5 4000 MHz (2DPC - 2DIMM 1R)
DDR5 3600 MHz (2DPC - 2DIMM 2R)
Capacity 128 GB (32 GB per DIMM)
Socket 4 x 288-pin Long-DIMM
Graphics
Controller Intel® UHD Graphics
HDMI HDMI 2.0b
Max resolution up to 4096 x 2160@60Hz
DisplayPort DisplayPort 1.4a, DP++
Max resolution up to 4096 x 2160@60Hz
VGA Max resolution up to 1920 x 1200@60Hz
MultiDisplay Triple Display
Audio Interface Realtek ALC897, High Denition Audio. Line-in,
Line-out, Mic-in
Ethernet
Controller/
Speed
LAN1: Intel® I226LM with 10/100/1000/2500 Mbps,
supports POE
LAN2: Intel® I226LM with 10/100/1000/2500 Mbps
LAN3: Intel® I226LM with 10/100/1000/2500 Mbps
Connector 3 x RJ-45

3
IMB-1714_IBM-X1714
Rear I/O
HDMI 1 x HDMI 2.0b
DisplayPort 1 x DP 1.4a++
VGA 1
Ethernet 3 x 2.5 Gigabit LAN
USB 5 x USB 3.2 Gen2
1 x USB 3.2 Gen2 x 2 (Type C)
Audio 3 (Mic-in, Line-in, Line-out)
COM COM1, COM2 (RS-232/422/485)
Internal
Connector
USB
2 x USB 3.2 Gen1 (1 x USB 3.2 header)
4 x USB 2.0 (1 x 2.54 pitch header, 2 x USB 2.0
Type-A vertical con)
COM COM3, COM4, COM5, COM6 (RS-232)
Parallel 1
GPIO 8 x GPI, 8 x GPO (shared with LPT header)
TPM TPM 2.0 onboard IC
PS2 1 x PS2 header
underbolt
header 1
Storage
M.2
(IMB-1714)
1 x M.2 (Key M, 2242/2260/2280/22110/25110)
with PCIe Gen4 x 4 for SSD
M.2
(IMB-X1714)
1 x M.2 (Key M, 2242/2260/2280/22110/25110)
with PCIe Gen4 x4 for SSD
1 x M.2 (Key M, 2242/2260/2280/22110/25110)
with PCIe Gen3 x 4 for SSD
SATA 8 x SATA3 (6Gb/s)
RAID
Intel® VMD RAID 0/1/5/10
**supported by identical interface (PCIe or
SATA)
PCIe interface:
M.2 Key B + M.2 Key M (IMB-1714)
M.2 Key B + M.2 Key M1/2 or 2*M.2 Key M
(IMB-X1714)
SATA interface: SATA port
Watchdog
Timer
Output From Super I/O to drag RESETCON#
Interval 256 Segments, 0, 1, 2, ...255 Sec
Power
Requirements
Input PWR ATX PWR (8+24 Pin)
Power On
AT/ATX Supported
- AT : Directly PWR on as power input ready
- ATX : Press button to PWR on aer power
input ready

4
Environment
Operating
Temp 0ºC ~ 70ºC
Storage Temp -40° C ~ 85° C
Operating
Humidity 5% ~ 90%
Storage
Humidity 5% ~ 90%

5
IMB-1714_IBM-X1714
1.3 Motherboard Layout
39
ATXPWR1
PCIE1
1
HD_AUDIO1
CMOS
Battery
Top:
Line In
Center:
Line Out
Bottom:
Mic In
ATX1 2V 1
Industrial
1
LPT_GPIO1
JGPIO_SET1
1
JGPIO_PWR1
1
SPDIF1
1
COM2
VGA1
1
CLRMOS2
CHA_FAN1
PCIE2
CHA_FAN3
USB2_10_11
1
ESPI1
1
1
USB3_5_6
CHA_FAN2
PWR_COM2
1
M2_M1
I225_LED2
1
I255_LED3
1
TB1
1
PCIE5
COM1
HDMI1
Top:
LAN3
USB 3.2 Gen2
T: USB3_2
B: USB3_1
1
CLRMOS1
COM3
1
PWR_COM3
1
1
SIO_AT1
1
DACC1
BIOS
ROM
SATA3_2
SATA3_0
SATA3_3
SATA3_1
PCIE4
PCIE7
PCIE3
PCIE6
M2_M2
M2_E1
DDR5_ A2 (6 4 bit, 288- pin m odule)
DDR5_ A1 (6 4 bit, 288- pin m odule)
DDR5_ B2 (6 4 bit, 288- pin m odule)
DDR5_ B1 (6 4 bit, 288- pin m odule)
DP1
Top:
LAN2
T: USB 3.2 Gen2
(USB3_9)
B: USB 3.2 Gen2x2
(TC_U3_7)
Top:
LAN1
USB 3.2 Gen2
T: USB3_4
B: USB3_3
1
PWR_COM1
1
PS2_KB_MS1
1
CPU_FAN1
PWR_LOSS1
COM4
1
COM5
1
COM6
1
PWR_COM4
1
PWR_COM6
1
PWR_COM5
1
SIM1
1
BUZZ2
I225_LED1
1
12345
7
8
9
10
12
6
19
15
13
25 24 23
22
21
33 32 31 30 29 28 27 26
37
36
35
34
38
14
PCIE_PWR1
41
40
PSU_SMB1
1
SATA3_4
SATA3_5
SATA3_6
SATA3_7
1
PWR_BAT1
1
CI2CI1
11
USB2_13
USB2_12
1 1
17
16
18
2 1
74 75
2 1
74 75
2 1
74 75
PANEL1
M2_B1
20
1 75
2 74
RESET H DLED
PWRBT N PLED

6
1 : COM Port Pin9 PWR Setting Jumpers
PWR_COM1~2 (For COM Port1~2)
2 : PS/2 Keyboard/Mouse Header
3 : LAN LED Header
I225_LED3 (For LAN3 Port)
4 : ATX 12V Power Connector (ATX12V1)
5 : Chassis FAN Connectors (+12V) (CHA_FAN1)
6 : CPU FAN Connector (+12V)
7 : USB 2.0 Port (USB2_13)
8 : PSU_SMB1
9 : 24-pin ATX Power Input Connector (ATXPWR1)
10 : Chassis Intrusion Header (CI1)
11 : USB 2.0 Port (USB2_12)
12 : PWR LOSS Jumper (PWR_LOSS1)
13 : Chassis Intrusion Header (CI2)
14 : Chassis FAN Connector (+12V) ( CHA_FAN3)
15 : USB 3.2 Gen1 Header ( USB3_5_6)
16 : M.2 Key-M Socket ( M2_M1)
17 : SATA3 Connectors (SATA3_4~5)
18 : SATA3 Connectors (SATA3_6~7)
19 : System Panel Header (PANEL1)
20 : M.2 Key-B Socket (M2_B1)
21 : M.2 Key-M Socket (M2_M2)
22 : Chassis FAN Connector (+12V) (CHA_FAN2)
23 : SATA3 Connectors (SATA3_0~3)
24 : COM Port Headers (COM3~6) (RS232)
25 : COM Port Pin9 PWR Setting Jumpers
PWR_COM3~6 (For COM Port3~6)
26 : ATX/AT Mode Jumper (SIO_AT1)
27 : ESPI Header (ESPI1)
28 : Printer Port / GPIO Header (LPT_GPIO1)
29 : Digital Input / Output Default Value Setting (JGPIO_SET1)
30 : Digital Input / Output Power Select (JGPIOPWR) (JGPIO_PWR1)
31 : USB 2.0 Header ( USB2_10_11)
32 : SPDIF Header (SPDIF1)
33 : Front Panel Audio Header (HD_AUDIO1)
34 : Buzzer (BUZZ2)
35 : Clear CMOS Headers (CLRMOS1~2)
36 : PWR_BAT1

7
IMB-1714_IBM-X1714
37 : LAN LED Headers
I225_LED1~2 (For LAN1~2 Port)
38 : DACC1
39 : M.2 Key-E Socket (M2_E1)
40 : 5-pin underbolt AIC Connector (TB1)
41 : PCIe Power Connector (PCIE_PWR1)

8
1.4 I/O Panel
1 RJ45 LAN Port (LAN3)
2 COM Port (COM1) (RS232/422/485)*
3 COM Port (COM2) (RS232/422/485)*
4 RJ45 LAN Port (LAN2)
5 RJ45 LAN Port (LAN1) (Supports POE)
6 Audio Jack: Blue - Line In
7 Audio Jack: Green - Line Out
8 Audio Jack: Pink - Microphone
9 USB 3.2 Gen2 Ports (USB3_3_4)
10 USB 3.2 Gen2 Port (USB3_9)
11 USB 3.2 Gen2x2 Type-C Port
(TC_U3_7)
12 D-Sub Port (VGA1)
13 DisplayPort (DP1)
14 HDMI Port (HDMI1)
15 USB 3.2 Gen2 Ports (USB3_1_2)
1 2 3 45
6
7
8
9
10
111213
14
15
* is motherboard supports RS232/422/485 on COM1, 2 ports. Please refer to the table
below for the pin denition. In addition, COM1, 2 ports (RS232/422/485) can be adjusted
in BIOS setup utility > Advanced Screen > Super IO Conguration. You may refer to our
user manual for details.
Pin RS232 RS422 RS485
1 DCD, Data Carrier Detect TX- RTX-
2 RXD, Receive Data TX+ RTX+
3 TXD, Transmit Data RX+ N/A
4 DTR, Data Terminal Ready RX- N/A
5 GND GND GND
6 DSR, Data Set Ready N/A N/A
7 RTS, Request To Send N/A N/A
8 CTS, Clear To Send N/A N/A
9 No Power/5V/12V N/A N/A
COM1, 2 Ports Pin Denition

9
IMB-1714_IBM-X1714
ACT/LINK
LED
SPEED
LED
LAN1 Port
LAN2 Port
LAN3 Port
Status Description
O 10/100Mbps connection
Orange 1Gbps connection
Green 2.5Gbps connection
Activity/Link LED SPEED LED
Status Description
O No Link
Blinking Data Activity
On Link
* ere are two LEDs on each LAN port. Please refer to the table below for the
LAN port LED indications.
LAN1, 2 and 3 Ports LED Indications

10
Chapter 2 Installation
is is a ATX (12-in x 9.6-in x 1.4-in, 30.5 cm x 24.4 cm x 3.6 cm) form factor moth-
erboard. Before you install the motherboard, study the conguration of your chassis
to ensure that the motherboard ts into it.
2.1 Screw Holes
Place screws into the holes to secure the motherboard to the chassis.
2.2 Pre-installation Precautions
Take note of the following precautions before you install motherboard components or
change any motherboard settings.
1. Unplug the power cord from the wall socket before touching any component.
2. To avoid damaging the motherboard components due to static electricity, NEV-
ER place your motherboard directly on the carpet or the like. Also remember to
use a grounded wrist strap or touch a safety grounded object before you handle
components.
3. Hold components by the edges and do not touch the ICs.
4. Whenever you uninstall any component, place it on a grounded antistatic pad or
in the bag that comes with the component.
5. Heatsink (e thermal solution of whole system needs to be designed addition-
ally.)
Make sure to unplug the power cord before installing or removing the motherboard. Failure to
do so may cause physical injuries to you and damages to motherboard components.
Do not over-tighten the screws! Doing so may damage the motherboard.
Before you install or remove any component, ensure that the power is switched o or the
power cord is detached from the power supply. Failure to do so may cause severe damage to
the motherboard, peripherals, and/or components.

11
IMB-1714_IBM-X1714
2.3 Installation of Memory Modules (DIMM)
IMB-1714 / IMB-X1714 provides four 288-pin DDR5 (Double Data Rate 5) LONG-
DIMM slots, and supports Dual Channel Memory Technology.
Dual Channel Memory Conguration
e DIMM only ts in one correct orientation. It will cause permanent damage to the moth-
erboard and the DIMM if you force the DIMM into the slot in the incorrect orientation.
1. For dual channel conguration, you always need to install identical (the same brand,
speed, size and chip-type) DDR5 DIMM pairs.
2. It is unable to activate Dual Channel Memory Technology with only one memory
module installed.
3. It is not allowed to install a DDR, DDR2, DDR3 or DDR4 memory module into a
DDR5 slot; otherwise, this motherboard and DIMM may be damaged.
Priority DDR5_A1 DDR5_A2 DDR5_B1 DDR5_B2
1Populated Populated
2Populated Populated Populated Populated

12
1
2
3
Open the DIMM slot latch.
Aligh the notch. Carefully press down until the
DIMM slides into the slot.
e latch snaps back into place.

13
IMB-1714_IBM-X1714
2.4 Expansion Slots
ere are 7 PCI Express slots, 3 M.2 sockets and 1 SIM socket on IMB-1714. ere are
7 PCI Express slots, 4 M.2 sockets and 1 SIM socket on IMB-X1714.
PCIE slots: PCIE1 (PCIE 5.0 x16 slot) is used for PCI Express x16 lane width cards.
PCIE2 (PCIE 3.0 x1 slot) is used for PCI Express x1 lane width cards.
PCIE3 (PCIE 3.0 x1 slot) is used for PCI Express x1 lane width cards.
PCIE4 (PCIE 5.0 x8 slot) is used for PCI Express x8 lane width cards.
PCIE5 (PCIE 4.0 x4 slot) is used for PCI Express x4 lane width cards.
PCIE6 (PCIE 3.0 x1 slot) is used for PCI Express x1 lane width cards.
PCIE7 (PCIE 4.0 x4 slot) is used for PCI Express x4 lane width cards.
M.2 sockets:
IMB-1714 :
1 x M.2 (Key E, 2230) with PCIe x1, USB 2.0 and CNVio fr Wireless
1 x M.2 (Key B, 3042/3052) with PCIe x1, USB3.2 Gen1, USB 2.0 and SIM for
4G/5G
1 x M.2 (Key M, 2242/2260/2280/22110/25110) with PCIe Gen4 x4 for SSD
IMB-X1714 :
1 x M.2 (Key E, 2230) with PCIe x1, USB 2.0 and CNVio fr Wireless
1 x M.2 (Key B, 3042/3052) with PCIe x1, USB3.2 Gen1, USB 2.0 and SIM for
4G/5G
1 x M.2 (Key M, 2242/2260/2280/22110/25110) with PCIe Gen4 x4 for SSD
1 x M.2 (Key M, 2242/2260/2280/22110/25110) with PCIe Gen3 x4 for SSD
SIM Socket: 1 x SIM socket connected to M.2 Key B

14
M.2 Key-E Socket
(M2_E1)
PIN SIGNAL SIGNAL PIN
1 GND +3.3V 2
3 GND +3.3V 4
5 PERn3 NA 6
7 PERp3 NA 8
9 GND LED 10
11 PETn3 +3.3V 12
13 PETp 3 +3.3V 14
15 GND +3.3V 16
17 PERn2 +3.3V 18
19 PERp2 NA 20
21 GND NA 22
23 PETn2 NA 24
25 PETp 2 NA 26
27 GND NA 28
29 PERn1 NA 30
31 PERp1 NA 32
33 GND NA 34
35 PETn1 NA 36
37 PETp 1 DEVSLP 38
39 GND SMB_CLK 40
41 PERn0 SMB_DATA 42
43 PERp0 NA 44
45 GND NA 46
47 PETn0 NA 48
49 PETp 0 PERST# 50
51 GND CLKREQ# 52
53 PEFCLKn WAKE# 54
55 PEFCLKp NA 56
57 GND NA 58
67 NA NA 68
69 PEDET +3.3V 70
71 GND +3.3V 72
73 GND +3.3V 74
75 GND
M.2 Key-M Socket
(M2_M1)
M.2 Key-B Socket
(M2_B1)
PIN SIGNAL SIGNAL PIN
1 GND +3VSB 2
3 USB_D+ +3VSB 4
5 USB_D- NA 6
7 GND NA 8
9 CNV_WGR_D1- CNV_RF_RESET 10
11 CNV_WGR_D1+ NA 12
13 GND MODEM_CLKREQ 14
15 CNV_WGR_D0- NA 16
17 CNV_WGR_D0+ GND 18
19 GND NA 20
21 CNV_WGR_CLK- CNV_BRI_RSP 22
23 CNV_WGR_CLK+
33 GND CNV_BGI_DT 32
35 PETp CNV_RGI_RSP 34
37 PETn CNV_BRI_DT 36
39 GND NA 38
41 PERp NA 40
43 PERn NA 42
45 GND NA 44
47 PEFCLKp NA 46
49 PEFCLKn NA 48
51 GND SUSCLK 50
53 CLKREQ# PERST0# 52
55 WAKE# W_DISABLE1# 54
57 GND W_DISABLE2# 56
59 CNV_WT_D1- SMB_DATA 58
61 CNV_WT_D1+ SMB_CLK 60
63 GND NA 62
65 CNV_WT_D0- CLKIN_XTAL_LCP 64
67 CNV_WT_D0+ NA 66
69 GND NA 68
71 CNV_WT_CLK- NA 70
73 CNV_WT_CLK+ +3VSB 72
75 GND +3VSB 74
PIN SIGNAL SIGNAL PIN
1NA +3.3V 2
3 GND +3.3V 4
5 GND FuLL_Card_Power_o 6
7 USB_D+ W_DISABLE 8
9 USB_D- WWAN_LED# 10
11 GND
21 GND NA 20
23 NA NA 22
25 NA NA 24
27 GND NA 26
29 USB3_RX- NA 28
31 USB3_RX+ UIM_RESET 30
33 GND UIM_CLK 32
35 USB3_TX- UIM_DATA 34
37 USB3_TX+ UIM_PWR 36
39 GND NA 38
41 PERn0 NA 40
43 PERP0 NA 42
45 GND NA 44
47 PETn0 NA 46
49 PETP0 NA 48
51 GND PERST# 50
53 PEFCLKn CLKREQ# 52
55 PEFCLKp WAKE# 54
57 GND NA 56
59 NA NA 58
61 NA NA 60
63 NA NA 62
65 NA NA 64
67 NA NA 66
69 NA NA 68
71 GND +3.3V 70
73 GND +3.3V 72
75 NA +3.3V 74
PIN SIGNAL SIGNAL PIN
1 GND +3.3V 2
3 GND +3.3V 4
5 PERn3 NA 6
7 PERp3 NA 8
9 GND LED 10
11 PETn3 +3.3V 12
13 PETp 3 +3.3V 14
15 GND +3.3V 16
17 PERn2 +3.3V 18
19 PERp2 NA 20
21 GND NA 22
23 PETn2 NA 24
25 PETp 2 NA 26
27 GND NA 28
29 PERn1 NA 30
31 PERp1 NA 32
33 GND NA 34
35 PETn1 NA 36
37 PETp 1 DEVSLP 38
39 GND SMB_CLK 40
41 PERn0 SMB_DATA 42
43 PERp0 NA 44
45 GND NA 46
47 PETn0 NA 48
49 PETp 0 PERST# 50
51 GND CLKREQ# 52
53 PEFCLKn WAKE# 54
55 PEFCLKp NA 56
57 GND NA 58
67 NA NA 68
69 PEDET +3.3V 70
71 GND +3.3V 72
73 GND +3.3V 74
75 GND
M.2 Key-M Socket
(M2_M2)
(For IMB-X1714 Only)

15
IMB-1714_IBM-X1714
2.5 Jumpers Setup
The illustration shows how jumpers are setup.
When the jumper cap is placed on pins, the
jumper is “Short.” If no jumper cap is placed
on pins, the jumper is “Open.” The illustration
shows a 3-pin jumper whose pin1 and pin2 are
“Short” when jumper cap is placed on these 2
pins.
Jumper Setting Description
COM Port Pin9 PWR Setting Jumpers 1-2 : +5V
(3-pin PWR_COM1 (For COM Port1))
2-3 : +12V
(see p. 5, No. 1)
(3-pin PWR_COM2 (For COM Port2))
(see p. 5, No. 1)
(3-pin PWR_COM3~6 (For COM Port3~6))
(see p. 5, No. 25)
1
2
3
Chassis Intrusion Headers
(2-pin CI1, CI2)
(see p. 5, No. 10, 13)
1
Signa
l
GND
is motherboard supports CASE OPEN
detection feature that detects if the chas-
sis cover has been removed. This feature
requires a chassis with chassis intrusion
detection design.
CI1 :
Short : Active Case Open
Open : Normal
CI2 :
Short : Normal
Open : Active Case Open