Asus Aaeon EPIC-BT07 User manual

Last Updated: August 12, 2022
EPIC-BT07
EPIC Board
User’s Manual 8th Ed

Preface II
EPIC Board EPIC-BT07
Copyright Notice
This document is copyrighted, 2022. All rights are reserved. The original manufacturer
reserves the right to make improvements to the products described in this manual at
any time without notice.
No part of this manual may be reproduced, copied, translated, or transmitted in any
form or by any means without the prior written permission of the original
manufacturer. Information provided in this manual is intended to be accurate and
reliable. However, the original manufacturer assumes no responsibility for its use, or for
any infringements upon the rights of third parties that may result from its use.
The material in this document is for product information only and is subject to change
without notice. While reasonable efforts have been made in the preparation of this
document to assure its accuracy, AAEON assumes no liabilities resulting from errors or
omissions in this document, or from the use of the information contained herein.
AAEON reserves the right to make changes in the product design without notice to its
users.

Preface III
EPIC Board EPIC-BT07
Acknowledgement
All other products’ name or trademarks are properties of their respective owners.
⚫Microsoft Windows is a registered trademark of Microsoft Corp.
⚫Intel®, Pentium®, and Celeron® are registered trademarks of Intel Corporation
⚫Intel Atom™is a trademark of Intel Corporation
⚫ITE is a trademark of Integrated Technology Express, Inc.
⚫IBM, PC/AT, PS/2, and VGA are trademarks of International Business Machines
Corporation.
All other product names or trademarks are properties of their respective owners. No
ownership is implied or assumed for products, names or trademarks not herein listed
by the publisher of this document.

Preface IV
EPIC Board EPIC-BT07
Packing List
Before setting up your product, please make sure the following items have been
shipped:
Item
Quantity
⚫EPIC-BT07
1
⚫SATA Cable
1
⚫SATA Power Cable
1
⚫Heat-Spreader
1
If any of these items are missing or damaged, please contact your distributor or sales
representative immediately.

Preface V
EPIC Board EPIC-BT07
About this Document
This User’s Manual contains all the essential information, such as detailed descriptions
and explanations on the product’s hardware and software features (if any), its
specifications, dimensions, jumper/connector settings/definitions, and driver installation
instructions (if any), to facilitate users in setting up their product.
Users may refer to the product page on AAEON.com for the latest version of this
document.

Preface VI
EPIC Board EPIC-BT07
Safety Precautions
Please read the following safety instructions carefully. It is advised that you keep this
manual for future references
1. All cautions and warnings on the device should be noted.
2. Make sure the power source matches the power rating of the device.
3. Position the power cord so that people cannot step on it. Do not place anything
over the power cord.
4. Always completely disconnect the power before working on the system’s
hardware.
5. No connections should be made when the system is powered as a sudden rush
of power may damage sensitive electronic components.
6. If the device is not to be used for a long time, disconnect it from the power
supply to avoid damage by transient over-voltage.
7. Always disconnect this device from any AC supply before cleaning.
8. While cleaning, use a damp cloth instead of liquid or spray detergents.
9. Make sure the device is installed near a power outlet and is easily accessible.
10. Keep this device away from humidity.
11. Place the device on a solid surface during installation to prevent falls
12. Do not cover the openings on the device to ensure optimal heat dissipation.
13. Watch out for high temperatures when the system is running.
14. Do not touch the heat sink or heat spreader when the system is running
15. Never pour any liquid into the openings. This could cause fire or electric shock.
16. As most electronic components are sensitive to static electrical charge, be sure to
ground yourself to prevent static charge when installing the internal components.
Use a grounding wrist strap and contain all electronic components in any
static-shielded containers.

Preface VII
EPIC Board EPIC-BT07
17. If any of the following situations arises, please the contact our service personnel:
i. Damaged power cord or plug
ii. Liquid intrusion to the device
iii. Exposure to moisture
iv. Device is not working as expected or in a manner as described in
this manual
v. The device is dropped or damaged
vi. Any obvious signs of damage displayed on the device
18. DO NOT LEAVE THIS DEVICE IN AN UNCONTROLLED ENVIRONMENT WITH
TEMPERATURES BEYOND THE DEVICE’S PERMITTED STORAGE TEMPERATURES
(SEE CHAPTER 1) TO PREVENT DAMAGE.

Preface VIII
EPIC Board EPIC-BT07
FCC Statement
This device complies with Part 15 FCC Rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received including interference that may cause
undesired operation.
Caution:
There is a danger of explosion if the battery is incorrectly replaced. Replace only with the
same or equivalent type recommended by the manufacturer. Dispose of used batteries
according to the manufacturer’s instructions and your local government’s recycling or
disposal directives.
Attention:
Il y a un risque d’explosion si la batterie est remplacée de façon incorrecte.
Ne la remplacer qu’avec le même modèle ou équivalent recommandé par le constructeur.
Recycler les batteries usées en accord avec les instructions du fabricant et les directives
gouvernementales de recyclage.

Preface IX
EPIC Board EPIC-BT07
China RoHS Requirements (CN)
产品中有毒有害物质或元素名称及含量
AAEON Main Board/ Daughter Board/ Backplane
部件名称
有毒有害物质或元素
铅
(Pb)
汞
(Hg)
镉
(Cd)
六价铬
(Cr(VI))
多溴联苯
(PBB)
多溴二苯醚
(PBDE)
印刷电路板
及其电子组件
×
○
○
○
○
○
外部信号
连接器及线材
×
○
○
○
○
○
O：表示该有毒有害物质在该部件所有均质材料中的含量均在
SJ/T 11363-2006 标准规定的限量要求以下。
X：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出
SJ/T 11363-2006 标准规定的限量要求。
备注：此产品所标示之环保使用期限，系指在一般正常使用状况下。

Preface X
EPIC Board EPIC-BT07
China RoHS Requirement (EN)
Poisonous or Hazardous Substances or Elements in Products
AAEON Main Board/ Daughter Board/ Backplane
Component
Poisonous or Hazardous Substances or Elements
Lead
(Pb)
Mercury
(Hg)
Cadmium
(Cd)
Hexavalent
Chromium
(Cr(VI))
Polybrominated
Biphenyls
(PBB)
Polybrominated
Diphenyl Ethers
(PBDE)
PCB & Other
Components
X
O
O
O
O
○
Wires &
Connectors
for External
Connections
X
O
O
O
O
O
O：The quantity of poisonous or hazardous substances or elements found in each of the
component's parts is below the SJ/T 11363-2006-stipulated requirement.
X: The quantity of poisonous or hazardous substances or elements found in at least one of the
component's parts is beyond the SJ/T 11363-2006-stipulated requirement.
Note: The Environment Friendly Use Period as labeled on this product is applicable under normal
usage only

Preface XI
EPIC Board EPIC-BT07
Table of Contents
Chapter 1 - Product Specifications.......................................................................................... 1
1.1 Specifications............................................................................................................ 2
Chapter 2 –Hardware Information ....................................................................................... 4
2.1 Dimensions ............................................................................................................... 5
2.2 Jumpers and Connectors....................................................................................... 7
2.3 Block Diagram.......................................................................................................... 9
2.4 List of Jumpers ........................................................................................................10
2.4.1 Auto Power Button Selection (CN3)...................................................10
2.4.2 PCI-104 VI/O Voltage Selection (CN4)............................................... 11
2.4.3 CMOS RTC Setting (CN5) ..................................................................... 11
2.4.4 LVDS/eDP Backlight Voltage Selection (CN17)................................. 11
2.4.5 LVDS/eDP Backlight Control Selection (CN18)................................. 11
2.4.6 Touchscreen 4/5/8-wire Mode Selection (CN28) ............................12
2.4.7 COM2 RI/+5/+12V Selection (CN34).................................................12
2.4.8 COM3 RI/+5/+12V Selection (CN36) .................................................12
2.4.9 eDP Operating Voltage Selection (CN40).........................................12
2.4.10 LVDS/eDP Operating Voltage Selection (CN41)...............................13
2.4.11 eDP Backlight Control Selection (CN42) ...........................................13
2.4.12 eDP Backlight Voltage Selection (CN43) ...........................................13
2.5 List of Connectors...................................................................................................14
2.5.1 Stereo Audio Right Channel (CN1) .....................................................16
2.5.2 RTC Battery Connector (CN2)..............................................................16
2.5.3 4-Pin Power-In Connector (CN6)........................................................16
2.5.4 Stereo Audio Left Channel (CN7) .......................................................17
2.5.5 2-Pin Power in Connector (CN8) ........................................................17
2.5.6 PCI-104 Connector (CN9).....................................................................17

Preface XII
EPIC Board EPIC-BT07
2.5.7 Audio Connector (CN10) ......................................................................19
2.5.8 LPT/ Digital I/O Connector (CN12)....................................................20
2.5.9 USB 2.0 Port 2/3/4/5 (CN13/14/15/16) ..............................................22
2.5.10 LVDS/eDP Inverter / Backlight Connector (CN19)..........................23
2.5.11 MicroSD Card Connector (CN20) ......................................................24
2.5.12 LPC Expansion Connector (CN21)......................................................25
2.5.13 UIM Socket (CN22) ...............................................................................26
2.5.14 +5V Output for SATA HDD (CN23) ...................................................26
2.5.15 eDP (CN24).............................................................................................27
2.5.16 SATA Port1 (CN25).................................................................................29
2.5.17 MiniCard Slot (CN26)............................................................................29
2.5.18 MiniCard/ mSATA Slot (CN27) .............................................................31
2.5.19 Touchscreen Connector (CN29) .........................................................34
2.5.20 PS/2 Keyboard Mouse Connector (CN30).......................................37
2.5.21 COM Port 4/5/6 (CN31/32/37)...........................................................38
2.5.22 SPI Programming Port (CN33) ...........................................................39
2.5.23 LVDS/eDP Port (CN35).........................................................................40
2.5.24 COM Port 3 (CN38) ..............................................................................44
2.5.25 Front Panel Connector (CN39)...........................................................47
2.5.26 10/100/1000 Mbps Ethernet Port 1/2 (CN44/45).............................48
2.5.27 eDP Inverter/Backlight (CN46) ...........................................................49
2.5.28 USB Port 0 & 1 (CN47)..........................................................................50
2.5.29 DP Port (CN48).......................................................................................51
2.5.30 COM Port 1 & 2 (CN49) .......................................................................52
2.5.31 HDMI Port (CN50).................................................................................54
2.5.32 VGA Port (CN51)....................................................................................55
2.5.33 SMBus Connector (CN52) ...................................................................56
2.5.34 DDR3L SODIMM (DIMM1)...................................................................56

Preface XIII
EPIC Board EPIC-BT07
Chapter 3 - AMI BIOS Setup ................................................................................................ 57
3.1 System Test and Initialization ..............................................................................58
3.2 AMI BIOS Setup .....................................................................................................59
3.3 Setup Submenu: Main..........................................................................................60
3.4 Setup Submenu: Advanced..................................................................................61
3.4.1 CPU Configuration................................................................................62
3.4.2 IDE Configuration..................................................................................63
3.4.3 USB Configuration.................................................................................64
3.4.4 Hardware Monitor.................................................................................65
3.4.5 Dynamic Digital I/O ..............................................................................66
3.4.6 Power Management .............................................................................68
3.4.7 SD Card Configuration.........................................................................69
3.4.8 Trusted Computing ...............................................................................70
3.4.9 SIO Configuration ..................................................................................71
3.4.9.1 SIO Configuration: Serial Port 1 Configuration ..................72
3.4.9.2 SIO Configuration: Serial Port 2 Configuration .................73
3.4.9.3 SIO Configuration: Serial Port 3 Configuration .................74
3.4.9.4 SIO Configuration: Serial Port 4 Configuration .................75
3.4.9.5 SIO Configuration: Serial Port 5 Configuration .................76
3.4.9.6 SIO Configuration: Serial Port 6 Configuration .................77
3.4.10 Parallel Port Configuration ..................................................................78
3.5 Setup submenu: Chipset......................................................................................79
3.5.1 North Bridge ..........................................................................................80
3.5.1.1 Chipset: Display Control Configuration................................81
3.5.2 South Bridge...........................................................................................83
3.6 Setup Submenu: Security.....................................................................................84
3.7 Setup Submenu: Boot ..........................................................................................85
3.7.1 BBS Priorities...........................................................................................86

Preface XIV
EPIC Board EPIC-BT07
3.8 Setup Submenu: Save & Exit...............................................................................87
Chapter 4 –Drivers Installation............................................................................................ 88
4.1 Drivers Download and Installation.....................................................................89
Appendix A –I/O Information ............................................................................................100
A.1 I/O Address Map ..................................................................................................101
A.2 Memory Address Map ....................................................................................... 103
A.3 IRQ Mapping Chart............................................................................................. 104
Appendix B –Mating Connectors .......................................................................................113
B.1 List of Mating Connectors and Cables.............................................................114
Appendix C –Electrical Specifications for I/O Ports..........................................................116
C.1 Electrical Specifications for I/O Ports................................................................117

EPIC Board EPIC-BT07
Chapter 1
Chapter 1 - Product Specifications

Chapter 1 –Product Specifications 2
EPIC Board EPIC-BT07
1.1 Specifications
System
Form Factor
4” EPIC Board
CPU
Intel® Atom™ E3845/Celeron® J1900/N2807
CPU Frequency
Up to 2.0 GHz
Chipset
Intel® Atom™/ Celeron® SoC
Memory Type
DDR3L 1333, SODIMM x 1
Max. Memory Capacity
Up to 8G
BIOS
AMI
Wake on LAN
Yes
Watchdog Timer
255 Levels
Power Requirement
+12V or 9-24V AT/ATX (default)
Power Supply Type
AT/ ATX
Power Consumption (Typical)
11.8W
Dimension (L x W)
4.53" x 6.50" (115 mm x 165 mm)
Operating Temperature
32°F ~ 140°F (0°C ~ 60°C)
Storage Temperature
-40°F ~ 185°F (-40°C ~ 85°C)
Operating Humidity
0% ~ 90% relative humidity, non-condensing
MTBF (Hours)
110,000
Certification
CE/FCC
Display
VGA/LCD Controller
Intel® Atom™/ Celeron® SoC
Video Output
CRT, LVDS, HDMI
Backlight Inverter Supply
Max. 12V

Chapter 1 –Product Specifications 3
EPIC Board EPIC-BT07
I/O
Ethernet
Intel® i211 Gigabit Ethernet, RJ-45 x 2
Audio
High Definition Audio Interface
USB Port
USB2.0 x 5
USB3.2 Gen 1 x 1
Serial Port
RS-232 x 4 (COM1, COM4, COM5, COM6)
RS-232/422/485 x 1 (Ring/ +5V/ +12V) (COM2,
COM3)
Parallel Port
SPP/EPP/ECP x 1
HDD Interface
SATA II (3.0 Gbps) x 1
SSD
mSATA x 1 (Share with full-size Mini Card by
BOM Change)
Expansion Slot
Mini Card x 1
Micro-SD x 1 (Optional, only E3800 series)
PCI-104 x 1 (Optional, only E3800 series)
SMbus x 1
I2C x 1 (optional)
PS/2 x 1
DIO
16-bit
TPM
Optional
Touch
Optional
SIM
SIM

EPIC Board EPIC-BT07
Chapter 2
Chapter 2 –Hardware Information

Chapter 2 –Hardware Information 5
EPIC Board EPIC-BT07
2.1 Dimensions
Component Side

Chapter 2 –Hardware Information 6
EPIC Board EPIC-BT07
Solder Side