ATD Tools SPI-77000 User manual

SPI-77000
User Manual
Peugeot

Contents
1. Product Installation....................................................................................................................1
2. Toggle Switch Setup..................................................................................................................1
3. Cables Connection.....................................................................................................................2
3.1 Product accessories...................................................................................................2
3.2 Cable connection chart..............................................................................................2
3.3 CarPlay box & Wi-Fi antenna installation...............................................................3
3.4 Mic installation............................................................................................................4
4. Sound Setup...............................................................................................................................5
5. Reverse Camera and 360 Camera..........................................................................................6
6. CarPlay and Android Auto........................................................................................................7
6.1 Wireless CarPlay / Android Auto..............................................................................7
6.2 Wired CarPlay / Android Auto...................................................................................8
7. Air Play and Mirror Link.............................................................................................................8
7.1 Wireless Air Play........................................................................................................8
7.2 Wireless Android Mirroring........................................................................................9
8. Contact Us................................................................................................................................ 12
9. FAQ............................................................................................................................................13

1 / 13
1. Product Installation
Please scan below QR code, view the detail via YouTube video about dashboard
removal guidance.
2. Toggle Switch Setup
1) Where to find the toggle switch?
Notice: TF card slot only used for the software upgrading.
2) Dial code setup
Notice: if the car has original OEM camera, the status of code NO.1 shall be “on”.

2 / 13
3. Cables Connection
3.1 Product accessories
①LVDS IN cable: connect with original car CD host LVDS port and LVDS IN port of
3.2
Cable
connection
chart

3 / 13
CarPlay decoder
②LVDS OUT cable: connect with original LVDS cable and LVDS out port of CarPlay
decoder
③ WIFI antenna
④ External MIC
⑤ AUX OUT connect
⑥ AUX
⑦ and ⑧ New power cable: connect with original CD host and power cable
3.3 CarPlay box & Wi-Fi antenna installation
CarPlay box can be installed inside the Storage box in front of passenger, or
come other suitable locations.
The Wi-Fi antenna cannot be placed close to metal objects. (The signal will be
very poor if Wi-Fi antenna is close to the metal objects.)
3.4 Microphone installation
Below is the example of Mic installation and cable laying, just take it as reference.

4 / 13
After cable connection done, long-press the “phone” button for 2 seconds, you
can switch the system between the original system and the CarPlay system.
4. Sound Setup
1) Disconnect the Bluetooth between your phone and your car.
2) Connect the Audio cable together as below shown

5 / 13
Notice: Sound transmission need to connect “Aux out”.
3) AUX setup
Before using the CarPlay system, please set “AUX” as audio transmission
channel.
5. Reverse Camera and 360 Camera
1) Original camera setting
If the car has original camera, code NO.1 of toggle switch need to be set as “on”.
2) Aftermarket rear camera
For the aftermarket rear camera, please follow below figure to connect the cable.

6 / 13
3) Aftermarket 360 camera
360 camera needs to connect cable NO. 3 and NO. 9（REVERSE CAMERA IN
and 360 CAMERA CONTROL）.
6. CarPlay and Android Auto
6.1 Wireless CarPlay / Android Auto
1) Disconnect or remove the Bluetooth connection between your phone and
car.
2) Turn on your mobile Phone “Wi-Fi” switch.

7 / 13
3) Turn on “Bluetooth” as well.
4) Search the Bluetooth of the product. The Bluetooth name of the product
shall be “Car Audio_XXXX”.
5) Pair the Bluetooth.
6) Allow the sync
7) Start to use CarPlay / Android Auto function.
6.2 Wired CarPlay / Android Auto
1) Connect the Product to your phone by USB cable.
2) Use wired CarPlay / Android Auto function.

8 / 13
7. Air Play and Mirror Link
7.1 Wireless Air Play
1) Please disconnect the CarPlay connection if the CarPlay is working (turn off
“WI-FI” switch).
2) Click “Mirroring” icon on the main interface as below figure 7.1, the hotspot
name and password will be shown at the lower left corner of the mirroring
interface as figure 7.2 shown.
Figure 7.1: main interface of the screen
3) Select and Click iPhone as shown in below figure 7.2.
Figure 7.2: mirroring interface

9 / 13
4) Search and connect WI-FI named “CarPlay_XXXX” shown at the bottom left
corner of the screen by your iPhone, and enter password: 88888888. (Only
the first-time connection needs to enter password)
5) Open the shortcut menu bar of iPhone, select "screen mirroring" and turn it
on, and then you can use Air Play function.
7.2 Wireless Android Mirroring
1) Download “M-link” app by your android phone and complete the installation.
Below is the QR code and the link for the “M-link” app
https://drive.google.com/file/d/1mSo44RhShrFmEaAsLfbqzfsG7Zd_d4aX/vie
w?usp=sharing

10 / 13
2) Disconnect the CarPlay connection if the CarPlay is working as well.
3) Click “Mirroring” icon on the main interface as below figure 7.3.
Figure 7.3: main interface of the screen
4) Select and tick Android in figure 7.4
Figure 7.4: mirroring interface
5) Turn on the Bluetooth of the android phone, search the Bluetooth named as
“Car Audio_XXXX” and pair it.
6) Go to the “Mobile network” setting of your phone, select “Tethering & personal
hotspot” and press “Portable WLAN hotspot”.

11 / 13
7) On the “Portable WLAN hotspot” interface, select “Configure WLAN hotspot”
to enter hotspot configuration interface, set the name and password of
"Personal Hotspot" to be consistent with the name and password shown on
the above figure 7.2 "Mirroring" interface.
8) Tick “Show advanced options” and select "5.0 GHz Band" for the hotspot AP
frequency band; turn on the "Personal Hotspot" switch, return to the main
interface of the phone and open "m-Link" to use mirroring function.

12 / 13
8. Contact Us
Please contact us via purchase platform if you need any help.
Tip: before contacting us, please help us to collect the following information.
1) the order ID
2) the car model
3) the year of the car
4) screen size of the car
5) the toggle switch setup
6) pictures about the LVDS cable connection
7) the software version (in the CarPlay decoder menu, enter into the “Setting”,
choose the “System”, you will see the software version.)

13 / 13
9. FAQ
Question 1: No sound during the call
Solution: Disconnect the Bluetooth between your phone and your car.
Question 2: Echo sound during the call
Solution: Press setting-system-factory mode-echo cancellation-starts to debug
from the bottom-right side- confirm after echo missing
Question 3: Steering wheel control buttons
Solution: For the steering wheel control buttons, the CarPlay interface decoder
box support voice control button, Tel button, voice “+” and “- “buttons,” previous”
and “next” button. the other buttons are not supported.