ATD Tools SPI-77700 User manual

SPI-77700
User’s Manual
Volvo

Contents
1. Dashboard Removal ..........................................................................................................1
2. Toggle Switch Setup..........................................................................................................1
3. Cables Connection.............................................................................................................2
3.1 Product accessories..............................................................................................2
3.2 Cable connection chart..........................................................................................2
3.3 Power cable connection.........................................................................................3
3.4 CarPlay box & Wi-Fi antenna installation.................................................................4
3.5 Mic installation......................................................................................................5
4. Sound Setup .....................................................................................................................5
5. Reverse Camera and 360 Camera.......................................................................................6
6. CarPlay and Android Auto...................................................................................................8
6.1 Wireless CarPlay / Android Auto.............................................................................8
6.2 Wired CarPlay / Android Auto.................................................................................9
7. Air Play and Mirror Link......................................................................................................9
7.1 Wireless Air Play....................................................................................................9
7.2 Wireless Android Mirroring...................................................................................10
8. Contact Us.......................................................................................................................13
9. FAQ.................................................................................................................................14

1 / 14
1. Dashboard Removal
Please scan below QR code, view the detail via YouTube video on dashboard removal guidance.
2. Toggle Switch Setup
2.1 Where is the toggle switch?
Notice: TF card slot only used for the software upgrading.
2.2 Dial code setup
Notice: if the car has original OEM camera, the status of code NO.1 shall be “on”.

2 / 14
3. Cables Connection
3.1 Product accessories
3.2 Cable Connection Chart

3 / 14
①LVDS IN cable: connect with original car CD host LVDS port and LVDS IN port of CarPlay
decoder
②LVDS OUT cable: connect with original LVDS cable and LVDS out port of
CarPlay decoder ③WIFI antenna ④External MIC
⑤and ⑥New power cable: connect with original power cable
⑦AUX OUT connect ⑧AUX ⑨USB cable
3.3 Optical cable connection
If your car has fiber optic cable, you need to move the original fiber optic cable to the new power
cable harness.

4 / 14
3.4 CarPlay box & Wi-Fi antenna installation
CarPlay box can be installed inside the Storage box in front of passenger, or come other suitable
locations.
The Wi-Fi antenna cannot be placed close to metal objects. (The signal will be
very poor if Wi-Fi antenna is close to the metal objects.)

5 / 14
3.5 Mic installation
Below is the example of Mic installation and cable laying, just take it as reference.
After all the cables installation done, by long press “EXIT” button, you can switch the system
between the original system and the CarPlay system.
4. Sound Setup
1) Disconnect the Bluetooth between your phone and your car.
2) Connect the Audio cable together as below shown

6 / 14
Notice: Sound transmission need to connect “Aux out”.
3) AUX setup
Before using the CarPlay function, please set “AUX audio” as audio transmission method.
5. Reverse Camera and 360 Camera
1) Original camera setting
If the car has original camera, code NO.1 of toggle switch need to be set as “on” status.
2) Aftermarket rear camera
For the aftermarket rear camera, please follow below sketch map to connect the cable.

7 / 14
3) Aftermarket 360 camera
360 camera needs to connect cable NO. 3 and NO. 9（REVERSE CAMERA IN and 360CAMERA
CONTROL）.

8 / 14
6. CarPlay and Android Auto
6.1 Wireless CarPlay / Android Auto
1) Disconnect or remove the Bluetooth connection between your phone and car.
2) Turn on your mobile Phone “Wi-Fi” switch.
3) Turn on “Bluetooth” as well.
4) Search the Bluetooth of the product. The Bluetooth name of the product shall be “Car
Audio_XXXX”.
5) Pair the Bluetooth.
6) Allow the sync
7) Start to use CarPlay / Android Auto function.

9 / 14
6.2 Wired CarPlay / Android Auto
1) Connect the product to your phone by USB cable.
2) Use wired CarPlay / Android Auto function.
7. Air Play and Mirror Link
7.1 Wireless Air Play
1) Please disconnect the CarPlay connection if the CarPlay is working (turn off “WI-FI” switch).
2) Click “Mirroring” icon on the main interface as below figure 7.1, the hotspot name and password
will be shown at the lower left corner of the mirroring interface as figure 7.2 shown.
Figure 7.1: main interface of the screen

10 / 14
3) Select and Click iPhone as shown in below figure 7.2.
Figure 7.2: mirroring interface
4) Search and connect WI-FI named “CarPlay_XXXX” shown at the bottom left corner of the screen
by your iPhone, and enter password: 88888888. (Only the first-time connection needs to enter
password)
5) Open the shortcut menu bar of iPhone, select "screen mirroring" and turn it on, and then you
can use Air Play function.
7.2 Wireless Android Mirroring
1) Download “M-link” app by your android phone and complete the installation. Below is the QR
code and the link for the “M-link” app
https://drive.google.com/file/d/1mSo44RhShrFmEaAsLfbqzfsG7Zd_d4aX/vie w?usp=sharing
2) Disconnect the CarPlay connection if the CarPlay is working as well.
3) Click “Mirroring” icon on the main interface as below figure 7.3.

11 / 14
Figure 7.3: main interface of the screen
4) Select and tick Android in figure 7.4
Figure 7.4: mirroring interface
5) Turn on the Bluetooth of the android phone, search the Bluetooth named as “Car Audio_XXXX”
and pair it.
6) Go to the “Mobile network” setting of your phone, select “Tethering & personal hotspot” and
press “Portable WLAN hotspot”.

12 / 14
7) On the “Portable WLAN hotspot” interface, select “Configure WLAN hotspot” to enter hotspot
configuration interface, set the name and password of "Personal Hotspot" to be consistent with
the name and password shown on the above figure 7.4 "Mirroring interface”.
8) Tick “Show advanced options” and select "5.0 GHz Band" for the hotspot AP frequency band;
turn on the "Personal Hotspot" switch, return to the main interface of the phone and open "m-
Link" to use mirroring function.

13 / 14
8. Contact Us
Please contact us via purchase platform if you need any help.
Tip: before contacting us, please help us to collect the following information.
1) the order ID
2) the car model
3) the year of the car
4) screen size of the car
5) the toggle switch setup
6) pictures about the LVDS cable connection
7) the software version (in the CarPlay decoder menu, enter into the “Setting”, choose the
“System”, you will see the software version.)

14 / 14
9. FAQ
Questions 1: No sound during the call
Solution: Disconnect the Bluetooth between your phone and your car.
Questions 2: Echo sound during the call
Solution: Press setting-system-factory mode-echo cancellation-starts to debug from the bottom-
right side- confirm after echo missing
Questions 3: Steering wheel control buttons
Solution: For the steering wheel control buttons, the CarPlay interface decoder box support voice
control button, Tel button, voice “+” and “- “buttons,” previous” and “next” button. the other buttons
are not supported.