ATD Tools SPI-77109 User manual

User’s Manual
SPI-77109

Contents
1. Toggle Switch Setup ..................................................................................................................1
1.1. Where to find the toggle (DIP) switches? ......................................................................1
1.2. Set the toggle switch ..................................................................................................1
1.3. Problem from Toggle switch setup incorrectly ..............................................................2
2. Dashboard Removal ...................................................................................................................3
3. Kit Contents ..............................................................................................................................3
3.1. Cable Connection Chart ..............................................................................................3
3.2. Power Cable Connection .............................................................................................5
3.3. A/C controller power cable connection ........................................................................6
3.4. FPC adapter board installation ....................................................................................7
3.5. LVDS Cable Connection ..............................................................................................8
3.6. WiFi Antenna and USB-AV Cable Connection ................................................................9
3.7. AMI Audio cable connection ........................................................................................9
3.8. Microphone connection .............................................................................................11
3.9. Where to put the CarPlay box? ...................................................................................12
4. CarPlay Sound Setup ................................................................................................................12
4.1. Bluetooth settings ....................................................................................................12
4.2. Set AUX ....................................................................................................................13
4.3. Set AMI ....................................................................................................................14
5. Reverse and Front Cameras ......................................................................................................16
5.1. Original OEM Camera ................................................................................................16
5.2. After Market Camera .................................................................................................16
5.3. Settings for aftermarket reverse camera and front cameras ........................................17
6. FAQ .........................................................................................................................................18
7. Contact US ..............................................................................................................................19

1/19
1. Toggle Switch Setup
1.1 Where to find the toggle (DIP) switches?
1.2 Set the toggle switch
Tips:
Pin 7: with OEM parking sensor Off / 0, No OEM parking sensor On /1

2/19
1.3 Toggle switch setup incorrectly will result in a black screen, flash screen, half-screen, etc.
Please contact us for the correct toggle switch setup code if you meet problems as in the follow chart.
Black screen when switch to CarPlay function
Flash screen in OEM function
Half-screen when switch to CarPlay function
Half-screen when switch to CarPlay function

3/19
2. Dashboard Removal
Please scan QR code, view the detail via YouTube video on dashboard removal guidance.
For A4 A5 Q5
3. Kit Contents
3.1 Cable connection chart

4 / 19
Please follow the connection chart accurately (detailed instructions below).
After the cables are all connected, you will be able to switch between the original Audi and the CarPlay
interfaces by long pressing the “MEDIA” button or “CAR” button on the MMI controller. or “NAV” button
from the steering wheel control.

5 / 19
3.2 Head Unit power cable connection
Unplug the OEM original power cable from the head unit and reconnect it to the new cable harness.
Then plug the new cable into the head unit.
Note:
In the power cable, don’t need to connect the grey cable to the green cable.

6 / 19
3.3 A/C controller power cable connection

7 / 19
3.4 FPC adapter board installation
Please scan QR code, view the detail via YouTube video on the FPC adapter board installation guidance.
FPC board installation video

8 / 19
3.5 LVDS cable connection
1) New LVDS cable 1 goes to the LVDS port of OEM the head unit.
2) New LVDS cable 2 goes to the original LVDS cable.
Note: Connecting the LVDS cables incorrectly will result in a black screen!

9 / 19
3.6 WiFi antenna and USB-AV cable connection
Note: To avoid losing the WiFi signal, make sure the antenna is not placed close to metal objects.
3.7 AMI audio cable connection (only for Audi cars with AMI function)
If your car has AMI port, you need to connect the AMI cable to your car AMI port, so that the sound from
the CarPlay function will work via the car’s AMI AUX function.

10 / 19
Where to find the AMI port?
in the glove-box
in the glove-box
in the central console box
behind media interface doors
AMI cable connection

11 / 19
3.8 Microphone connection
Aftermarket mic should be installed close to the driver position.

12 / 19
3.9 Where to put the CarPlay box?
The CarPlay interface decoder box should be installed in an appropriate space near, or on, the OEM head
unit. Or in the glove box.
on the OEM head unit
Beside the OEM head unit
In the glove box
In the glove box

13 / 19
4. CarPlay Decoder Sound Setup
4.1 Bluetooth settings
If your phone already has a Bluetooth connection to your car, disconnect it.
4.2 Set AUX
Before using the CarPlay system, you need to set the sound input on your OEM interface to “AUX”,
otherwise the CarPlay /Android Auto system will have sound!
On the original Audi System, navigate to the “Media” interface, click the “External audio input”

14 / 19
4.3 Set AMI (only for Audi cars with AMI function)
If your car has AMI port, after connect the AMI cable to your car AMI port, you need to set the “Media”
into “AMI”
After the cables are all connected, you will be able to switch between the original Audi and the CarPlay
interfaces by long pressing the “MEDIA” button or “CAR” button on the MMI controller. or “NAV” button
from the steering wheel control.

15 / 19
CarPlay Decoder main interface

16 / 19
5. Reverse and Front Cameras
5.1 Original OEM camera
Enter the “Setup” menu from the decoder main menu, choose “Reverse”, then make sure the “Reverse
Camera” option is set to “Original”.
Make sure that the following three options are all set to “off”.
5.2 Aftermarket camera
Aftermarket rear view camera cable connection

17 / 19
Aftermarket front view camera cable connection
5.3 Settings for aftermarket reverse camera and front cameras
After the aftermarket camera cables are connected, you need to check the camera settings (click the
“Setup” button from the decoder main menu).
“Reverse” camera settings: choose “Reverse”, from the menu and set the reverse camera to
“Aftermarket”.
the options “Reverse line detect”, the “Reverse display track”, and the “Reverse display radar” should all
be set to “off”.
Front view camera settings: choose “Reverse”, from the menu and set the front view time between 1 to
15 seconds.

18 / 19
6. FAQ
1. Why is there no sound during the call?
Solution: Disconnect the Bluetooth between your phone and your car.
2. Why is there no sound during CarPlay function?
Solution: Check the car, if the car has AMI port, AMI cable needs to be connected to the original AMI
port.
3. How do I activate Siri?
There are two ways to activate the Siri function:
1) Use the Voice Control button on the steering wheel or
2) Long press the confirm button on the iDrive controller