Ateis PENTON PBC Series User manual

PBC10TCX/EN
DESIGN WALLMOUNT-SPEAKER, PLASTIC
Page 1/2
The PBC10TCX/EN is a wall-mounted speaker which looks stylish
and elegant with its innovative design. It is delivered in a 10 watt
two way version and has an excellent bass-height ratio. This results
in an excellent reproduction of speech and music as well as a very
pleasant sound and a very clean understandability. The eortless
and easy installation of this speaker via a hidden attachment. Your
areas of application represent spaces in which value design and
outstanding. Sound quality is placed, such as bars, restaurants,
hotels, reception rooms, representative rooms, doctors’ oces
waiting rooms, oces, etc.
PBC10TCXEN_datasheet_AE_en_vn3.0_web
Standard Compliant to EN54-24
Compliant to BS5839:8
Electrical
Rated power, Watts 10
Tappings 100 Volt line, Watts 10/5/2.5/1.25
Transformer Impedance, Ohms 100 Volt 1k/2k/4k/8k
Tappings 70.7 Volt line, Watts 5/2.5/1.25/0.625
Driver impedance, Ohms 8
Eective Frequency Range, Hz (BSEN60268-5) 80-20.000
S.P.L. @ 1 m, 1 Watt, dB, Octave, 100 Hz-10 kHz 89
S.P.L. @ 1 m, Full power, dB, Octave, 100 Hz-10 kHz 99
S.P.L. @ 4 m, 1 Watt, dB, 1/3 Octave, 100 Hz-10 kHz 81
S.P.L. @ 4 m, Full power, dB, 1/3 Octave, 100 Hz-10 kHz 86
Dispersion at 1k/2k Hz, Degrees 132/96 Horizontal 169/96 Vertical
Environmental
IP Rating 21
Min/Max amb temp -10°C to 55°C
Relative Humidity ≤95%
Mechanical
Dimensions, WxHxD mm 330 x 240 x 90
Net weight, kg 1.15
Colour (Unless Specied) White, RAL9016
Material Low smoke zero Halogen UL-94V0 Plastic
with UV inhibitors
Mounting Keyhole and/or screws
Safety Ceramic Block
Thermal Fuse
ATEÏS Europe B.V.
Celsiusstraat 1, 2652 XN Lansingerland, Netherlands
Phone [phone], www.ateis-europe.com, [email protected]
EN54-24:2008
0905-CPR-201109
TYPE A

SPL(dB)
Frequency(Hz)
Sensitivity 100Hz-10000Hz 1/3 Oct. Pink noise 1W/4 Meters)
Sensitivity 100Hz-10000Hz Oct. Pink noise 1W/1 Meter)
*Active Equalizer Applied: NO
100 200 500 1k 2k 5k 10k
100
60
70
80
90
50
Page 2/2PBC10TCXEN_datasheet_AE_en_vn3.0_web
Disclaimer: We reserve the right of changes and errors.
1
2
4
3
COM .
100V
Thermal Fuse
INSTALLATION GUIDE
PBC10TCX/EN
ATEÏS Europe B.V.
Celsiusstraat 1, 2652 XN Lansingerland, Netherlands
Phone [phone], www.ateis-europe.com, [email protected]
1) On selecting the chosen position
for the loudspeaker (it can be
mounted vertically or horizontally)
use a spirit level to ensure that it is
level. Oer the speaker to the wall
or ceiling and mark through the
mounting holes, as shown on the
drawing to the right, the position
required for drilling.
2) Drill 2 holes 210 mm apart and
then raw plug them.
3) Cabling can now take place,
connect the 100 volt line supply to
your required volume as shown on
the circuit diagram.
4) With the cable in place the
speaker can be screwed through
the mounting holes into position.
Once in position the two mounting
hole caps can be put in place to hide
the oending screw heads.
There is also provided a key hole
mounting plate, as shown on the
drawing, this can only be used if the
loudspeaker is wall mounted and in
a vertical position.
Circuit Diagram
Frequency response
EN54-24:2008
0905-CPR-201109
TYPE A
1. Loudspeaker enclosure
2. Reference axis
3. Horizontal plane
4. Reference plane
With Transformer:
100V/70V line
White wire plus tapping Black
100V 1.25W 2.5W 5W 10W COM
70V 0.625W 1.25W 2.5W 5W COM
IMP (Ω) 8k 4k 2k 1k
0359
17