
RNS6/T
CEILING LOUDSPEAKERS
Page 1/2
The RNS product line includes one-piece standard Ceiling
speaker in a metal version. The three Models of this line t
visually very well in our existing product lines. Two metal
retaining springs allow a safe and even t of these built-in
loudspeakers in the ceiling. The speaker broadband chassis and
the 100 V transformer form a unit with the front grille.
RNS6T_datasheet_AE_en_vn1.0_web
Electrical
Rated power, Watts 6
Tappings 100 volt line, Watts 6/3/1.5/0.75/0.25
Transformer Impedance, Ohms 100V 1.67k/3.33k/6.66k/13.3k/39.9k
Tappings 70.7 volt line, Watts 3/1.5/0.75/0.375/0.125
Driver impedance, Ohms 8
Eective Frequency Range, Hz (BSEN60268-5) 110-18,500
S.P.L. @ 1m, 1 watt, dB, Test Signal Bandwidth 100Hz-10 kHz 92
S.P.L. @ Full power Octave Bandwidth, dB 99
Dispersion at 1kHz, Degrees 160
Directivity Axial Q factor, 1kHz 2.1
Environmental
IP Rating n/a
Min/Max amb temp n/a
Relative Humidity n/a
Mechanical
Dimensions, mm Ø227
Net weight, kg 0.95
Colour/Finish White RAL9016
Material Steel, Powder coated
Mounting 2 Fast Tension Springs
Cut-out, mm Ø198
ATEÏS Europe B.V.
Celsiusstraat 1, 2652 XN Lansingerland, Netherlands