Atmel FPSLIC ATSTK94 User manual

R
ATSTK94 STARTER KIT
Atmel offers a low-cost development kit for the designer who wishes to begin
working with the award-winning FPSLIC™ (AT94K) family of devices.The kit
allows designers to design, synthesize, simulate and program Atmel’s new
FPSLIC product. A comprehensive tutorial takes designers through the
complete FPSLIC development process.The starter kit, which runs on PC
Windows®-based platforms, includes everything needed to get started with
FPSLIC, including all software, tutorials, complete documentation, boards,
parts and cables.The kit consists of a starter kit board that includes:
•AT94K40AL Device
•AT17LV010 Device
•AT17 Series ISP Port for Direct ISP
Download from PC
•Push-button Switches and LEDs
•Four Alphanumeric LED Displays
•Two RS232 Transmit/Receive Ports
•18.432 MHz, 4 MHz and 32 kHz
Clock Sources
•Power Management Circuitry (Direct
Plug-in-wall 9-volt Power Supply to
Board – Supplied to US Customers)
•Easy Access to All FPSLIC Pins via
Headers
•Push-button FPSLIC Reset
•ATDH2225 Configurator Programming
Cable for Rapid AT17LV010 In-System
Programming
•The System Designer™ Software
(4-month License)
FIELD PROGRAMMABLE
SYSTEM-LEVEL INTEGRATION
ON EVERY ENGINEER’SDESKTOP

Corporate Headquarters
2325 Orchard Parkway
San Jose, CA 95131
Tel: [phone]
Fax: [phone]
Europe
Atmel SarL
Route des Arsenaux 41
Casa Postale 80
CH-1705 Fribourg
Switzerland
Tel: [phone]
Fax: [phone]
Asia
Atmel Asia, Ltd
Room 1219
Chinachem Golden Plaza
77 Mody Road
Tsimshatsui East, Kowloon
Hong Kong
Tel: [phone]
Fax: [phone]
Japan
Atmel Japan K.K.
9F, Tonetsu Shinkawa Bldg.
1-24-8 Shinkawa
Chuo-ku, Tokyo 104-0033
Japan
Tel: [phone]
Fax: [phone]
e-mail
[email protected]
Web Site
http://www.atmel.com
©Atmel Corporation 2001
Atmel Corporation makes no warranty
for the use of its products, other than
those expressly contained in the
Company’s standard warranty which is
detailed in Atmel’s Terms and
Conditions located on the Company’s
web site. The Company assumes no
responsibility for any errors which may
appear in this document, reserves the
right to change devices or
specifications detailed herein at any
time without notice, and does not
make any commitment to update the
information contained herein. No
licenses to patents or other intellectual
property of Atmel are granted by the
Company in connection with the sale
of Atmel products, expressly or by
implication. Atmel’s products are not
authorized for use as critical
components in life support devices
or systems.
Atmel®, AVR®and AVR Studio®are the
registered trademarks of Atmel;
FPSLICTM and System DesignerTM are
the trademarks of Atmel. Other terms
and product names may be trademarks
of others.
1952B–10/01/15M
R
FPSLIC THE ATSTK94 STARTER KIT
Included in the System Designer Software:
•Comprehensive FPGA Tool Suite
•Configurator Programming System
(CPS)
•One-month AVR C Compilers
Evaluation License
•Tutorials, Hands-on Examples and
Documentation on How to Use
FPSLIC, System Designer and the
Starter Kit Board
Ordering Information for the ATSTK94 Starter Kit
The low-cost starter kit is available from Atmel-franchised distributors or by
contacting your local Atmel Sales Office; the ordering code is ATSTK94.
•Full-featured Version of the FPSLIC
Development Tool
•Co-verification for Complete
Hardware (VHDL/Verilog) or Software
(C/ASM) Interactive Simulation
•ModelTech MTI HDL Simulator
•Exemplar HDL Synthesis
•AVR®Instruction Set Simulator (ISS)
•AVR Studio®Complete Development
and Debug Environment