Atronic Harmony Slant Top User manual

www.atronic.com
Atronic Harmony™ Slant Top
Installation Manual
Rev. 1.4
June 2008

2
June 2008
Harmony™ - Installation Manual
RELEASE INFO
Release Info:
Atronic Harmony™ Slant Top
Installation
Rev. 1.4
Rel. June 2008
WARNING!
The Harmony™ / Hi(!)bility™ manuals are intended to provide QUALIFIED TECHNICAL PERSONNEL
ONLY with the information necessary to routinely maintain, service, and repair the Atronic Harmony™
cabinet and components. To avoid personal injury or damage to the equipment, do not perform any
servicing other than that contained in this manuals.
NOTE!
This installation module of the Harmony™Slant Top includes only information relating to the installation
of the slant top cabinet. For other machine or cabinet types please refer to the relevant manuals.
Copyright Notice:
© 2008, Atronic. All rights reserved.
No part of this publication may be copied or distributed, transmitted, transcribed, stored in a retrieval
system, or translated into any human or computer language, in any form or by any means, electronic,
mechanical, magnetic, manual, or otherwise, or disclosed to third parties without the express written
permission obtained from a properly authorized official of Atronic.
DISCLAIMER
Atronic makes no representation or warranties, express or implied, with respect to this publication, or
any product of Atronic, including but not limited to warranties of merchantability or fitness for any
particular purpose. Atronic reserves the right to make changes, enhancements, revisions and alterations
of any kind to this publication or the product(s) it covers without obligation to notify any person, institution
or organization of such changes, enhancements, revisions and alterations.
TRADEMARKS
This document may contain trademarks of Atronic. All other brand and product names are trademarks
or registered trademarks of their respective companies.

3
June 2008
Harmony™ - Installation Manual
Introduction
About this Manual
Scope, Target Audience, Included Software Releases ....
Related Publications ...................................................
Safety Instructions .........................................................
Machine Components .......................................................
Dimensions ......................................................................
Technical Data ................................................................
Machine Installation
Overview ..........................................................................
Inspection ........................................................................
Positioning ........................................................................
Mount Toplight .................................................................
Replace Shipping Locks .....................................................
Prepare Coin Acceptor .......................................................
Prepare Hopper .................................................................
Check Commboard Settings ................................................
Apply Power ......................................................................
Basic Setup (Overview only) ..............................................
Tests ...............................................................................
Technical Support Telephone Numbers ..............................
4
5
7
10
13
14
16
17
17
17
17
18
18
18
19
21
22
23
CONTENT

4
June 2008
Harmony™ - Installation Manual
ABOUT THIS MANUAL
Scope
This Installation Manual describes how to install an
Atronic Harmony™ Slant Top gaming machine.
It describes relevant procedures to be carried out
before the machine can be put into operation. Furt-
her it contains important safety instructions,
technical data and cabinet drawings.
Target Audience
We address qualified technical personnel, who are
involved in installation, setup and configuration of
Atronic gaming machines. With this user group we
assume that they are basically familiar with gaming
machinesand casino related terminology.
Please read this document and the contained safety
notes carefully before you start machine installation.
Included Software Releases
The installation procedures described in this manual
do not relate to a certain software version.
INTRODUCTION

5
June 2008
Harmony™ - Installation Manual
ABOUT THIS MANUAL
Related Publications
More detailed information about Atronic Harmony™
Slant Top gaming machines may be found in the
following publications:
Software Manuals
•Manual HI Software (C4.x.x.x STD)
•Manual HI Software (C5.x.x.x STD)
Operation Manuals
•Manual HST Operating (C4.x.x.x STD)
•Manual HST Operating (C5.x.x.x STD)
Spare Parts
•Manual HST Parts Catalogue
Linked Gaming Products
•Manual [ product ] - Setup and Configuaration
for a particular linked gaming product, such as
Mystery Magic™, Hot Link™, etc.
Peripherals
(Coin- and bill acceptors, hopper, printer, etc.)
•See folder "Peripherals" on the Atronic Service
Manual CD.
Note: All mentioned manuals can be found on a CD-
ROM titled "Atronic Service Manual 2008"
If this manual did not came with this CD-ROM, please
ask Atronic Technical Service for a free copy of the
latest revision.
INTRODUCTION

6
June 2008
Harmony™ - Installation Manual
- blank page -

7
June 2008
Harmony™ - Installation Manual
SAFETY INSTRUCTIONS
Note!
This installation module of the Harmony™Slant Top
includes only information relating to the installation
of the slant top cabinet. For other machine or cabinet
types please refer to the relevant manuals.
Follow the safety precautions below
and on the next page, to ensure safe
operation.
Caution! High Voltage
Power cable must be disconnected from the main
power socket, so that the machine is free from
electrical current. The power switch is intended for
service purposes only.
Caution! Moving Parts
Make sure to disconnect the hopper, when working
on it.
Caution!
The machine must not be cleaned using a high
pressure cleaner or a vapor jet and must not be
installed or operated in areas where high pressure
cleaners or vapor jets are used. Use in dry conditions
only.
Continues on next page
SAFETY INSTRUCTIONS

8
June 2008
Harmony™ - Installation Manual
SAFETY INSTRUCTIONS
Further safety precautions during Installation,
Service and Maintenance
•The machine weight is approx. 125kg. Always use
appropiate equipment for transportation.
•Disconnect the power cable from the socket, befo-
re working at the machine.
•The machine may only be operated in dry conditi-
ons and must be connected to a grounded mains
power socket.
•Check that all connectors are seated correctly. Fal-
se connections can cause irreparable damage, not
covered by warranty.
•For power cable routing remove the knock-out pla-
te on the appropriate side of the cabinet. Edge-
protection must be mounted once the knock-out
plate has been removed.
•Only qualified service personnel should perform
repairs.
•Electronic assemblies should only be changed with
the power switched off.
•Use only original Atronic parts for replacement.
•Atronic commboard and mainboard
Danger of explosion if battery is incorrectly repla-
ced! Check for correct polarity and replace with
the same or equivalent type only!
•The machine must not be cleaned using a high pres-
sure cleaner or a vapor jet and must not be instal-
led or operated in areas where high pressure clea-
ners or vapor jets are used. Use in dry conditions
only.
•Please refer to relevant Atronic service manuals
for further instructions on setup, operation and
maintenance.
SAFETY INSTRUCTIONS

9
June 2008
Harmony™ - Installation Manual
- blank page -

10
June 2008
Harmony™ - Installation Manual
MACHINE COMPONENTS
MACHINE COMPONENTS
Toplight
Monitor
Online System
Module (optional)
Loudspeakers
Button Panel
Cup Holder
Arm Rest
Audit Key Switch
Jackpot Key Switch
Maindoor Lock
Mechanical Meters
Coin Bowl
Drop Door
Drop Door Lock
(second lock optional)
(second lock optional)
Topper
Arch
Deck Glass
Ticket Printer (optional)
Coin Entry
Functional Button Panel
Bill Entry / Bill Decal
Name Plate
Bill Door
Bill Door Lock
Subwoofer
(second lock optional)
Card Reader (optional)
Hopper Drawer

11
June 2008
Harmony™ - Installation Manual
MACHINE COMPONENTS
MACHINE COMPONENTS
Logicbox
Ticket Printer (optional)
Coin Geometry
Coin Unit
Coin Acceptor
Bill Acceptor
Coin Optics
Cashbox (Stackerbox)
Bill Door Switch
Filterboard Power
Logicbox Lock
Service Button
Reset Button
Buttonboard
Multimediaboard Cover
Maindoor Switch
Hopper Drawer
Switch
Power Switch
Power Outlets
Power Supply
Hopper
Audit Key Switch
Jackpot Key Switch

12
June 2008
Harmony™ - Installation Manual
MACHINE COMPONENTS
MACHINE COMPONENTS
Logic Box
Logicbox Switch
Backplane
Commboard
Mainboard
DVD-ROM Drive
Graphic Card
(VP11)
Release Lever for
Multimediaboard
Cover
Multimediaboard
Multimediaboard
Cover

13
June 2008
Harmony™ - Installation Manual
880mm / 34.6” 670mm / 26.4”
1188mm / 46.8”
1685mm / 66.3”
993mm / 39.1”
1850mm / 71.9”
DIMENSIONS
DIMENSIONS
Inch values rounded to one decimal place.

14
June 2008
Harmony™ - Installation Manual
TECHNICAL DATA
TECHNICAL DATA
Weight: approx. 125 kg (258 lbs)
Required Voltage: 100V to 240V AC,
50Hz / 60Hz,
use earthed power outlet
min. 6A / 115V, 3A / 230V
Power Consumption: Idle Mode: approx. 160 Watt,
0.7A / 230V
Payout Mode: approx. 230 Watt,
1A / 230V
Max. Power: approx. 350 Watt
(Without internal power outlets)
Power Supply
Secondary Voltage:+24V / 4.5A
+12V / 12A
-12V / 0.5A
+5V / 11A
+3.3V / 7A
Fuses Power Supply: T 8A / 250V (UL fuse)
Fuses Filterboard: F2 (+12 V) = T 6.3A / 250V (UL fuse)
F3 (+24 V) = T 4A / 250V (UL fuse)
Environmental Specifications
Operating Temperature: 0°C - 45°C
(32°F - 113°F)
Operating Humidity:0% to 85% (non condensing)

15
June 2008
Harmony™ - Installation Manual
- blank page -

16
June 2008
Harmony™ - Installation Manual
MACHINE INSTALLATION OVERVIEW
This section should only be carried out by
qualified technical service personnel.
Review the list below and perform as needed.
Explanations are located on the following pages and
in additional manuals.
Inspect machines for transport damage. Any
transport damage should be noted and witnessed
by the freight forwarder. The manufacturer accepts
no responsibility for transport damage.
Check machines for the correct hardware and
software configuration and check EPROMs for
proper fitting.
Replace shipping locks with casino specific locks.
Install and connect accounting system.
Check that all internal and external connections
are seated correctly.
Prepare coin acceptor and hopper.
Thread the power cable out of the machine. Do not
yet connect power to the machine.
Apply power to the machine.
Load paper into the printer (optional).
Execute basic machine setup (Initial Setup).
Configure game.
Test bill and coin handling.
MACHINE INSTALLATION
Note:
Depending on machine
configuration and jurisdictional
requirements, additional tasks
may have to be carried out
before the machine can be put
into operation (e.g. acceptance
inspection, logicbox sealing,
etc.).

17
June 2008
Harmony™ - Installation Manual
MACHINE INSTALLATION
Inspection
Unpack the machine and inspect it for transport
damage. Any transport damage should be noted and
witnessed by the freight forwarder. The manufacturer
accepts no responsibility for transport damage.
Check that all connectors and EPROMs are seated
correctly, prior to power up. Loose connections can
cause irreparable damage, not covered by warranty.
Positioning
The machine should be standing on a level, flat and
stable floor. Ensure there are no local sources of
high temperatures or moisture. Avoid direct sunlight
shining on the glass surfaces.
Mount Toplight
Connect the toplight and mount as illustrated. To
avoid damaging the toplight, hold the toplight at its
lower ring, when you screw it into the topper bayonet
catch.
Replace shipping locks
Atronic machines are equipped with shipping locks
for easy commisioning. These locks have to be replaced
by casino specific locks to provide appropriate
security.
MACHINE INSTALLATION
Hold here

18
June 2008
Harmony™ - Installation Manual
MACHINE INSTALLATION
Prepare Coin Acceptor (MC-16)
•Slide holder for reference coin rightwards, remove
(plastic) transport chip and replace it with appro-
priate reference coin.
•Check reference coin for proper (parallel) seating.
Prepare Hopper
The hopper high level switch detects the filling level
of the hopper by the weight of the coins. If the switch
is activated, further accepted coins are separated to
the drop box. Switching threshold can be altered
with an adjustment srew.
•Fill the hopper with that amount of coins/tokens
at which you want the switch to be activated.
•Adjust switching threshold with the adjustment
screw that operates the high level switch.
Note: See manuals Peripherals / Hopper for details.
Check Commboard Settings
(optional) Read the section "Commboard DIP Switch
Settings" within the software manual that refers to
the installed software version, to check or alter
commboard settings. These settings configure
system address, progressive mode and channel
allocation. Then connect to the online system.
MACHINE INSTALLATION
Commboard
Logicbox
Cover

19
June 2008
Harmony™ - Installation Manual
MACHINE INSTALLATION
Apply Power
•Punch out one of the perforated knock-out plates
in order to provide access for the power cable (fi-
gure a).
•Mount the enclosed edge protection (figure b).
•Check that the machine mains cable has not been
damaged during transit.
•Check that the supply socket is in good condition
and not showing any signs of overheating or da-
mage.
•Connect the power cable to a grounded power out-
let, that is rated for min. 3A / 230V at 50 Hz or
6A / 115V at 60 Hz.
•Switch the machine on and check that the machi-
ne initializes. The LED's on the masterboard (they
indicate correct voltages) should all be lit. The po-
wer switch is located at the power supply left to
the hopper.
Note: The power up cycle will take some minutes,
because the machine checks installed hardware
and security relevant circuits. To operate the ma-
chine while the maindoor is open, pull the maindoor
switch (set it to closed position).
MACHINE INSTALLATION
Power Switch
(a)
(b)
At this point the machine installation is finished. Proceed
with Basic Setup. (Initial Setup and Service Menu settings)
Please refer to the software manual for a particular software
version for details, e.g. Manual HI Software (C5.x.x.x STD)

20
June 2008
Harmony™ - Installation Manual
- blank page -