Audiovox REMIRS User manual

REMIRS
REMOTE CONTROL IR DISTRIBUTION BOX
OPERATING INSTRUCTION
EXPLANATION OF GRAPHIC SYMBOLS:
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
WARNING: TO PREVENTFIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT
TO RAIN OR MOISTURE.
Thelightningflashwiththearrowheadwithin
a triangle is intended to alert tell the user
that parts inside the product are capable of
producing an electric shock .
The exclamation point within a triangle
is intended to alert the user that important
operating and servicing instructions are
being provided.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
128-6082
© 2001Audiovox Corporation, 150 Marcus Blvd., Hauppauge, NY 11788

Operation Instruction
1. Plug the DC Power cord into the REMIRS DC input jack (1).
2. Connect the DC power cord’s other end to DC 12V and ground.
(Black for “–” and Red for “+”).
3. Insert the REMIR Sensor cable to the REMIR Sensor input
jack (2).
FRONT VIEW 4. Insert the IR Repeater cables into theIR REPEATER OUTPUT jack. Connect the other end of the cables to the desired
sources (VCP, DVD, etc.)
METINOITCNUF
1TUPNICD
2TUPNIROSNESRIMER
3TUPTUOLANGISDERARFNITAEPER
123
IR REP
EPEA
EAT OU
OUTPUT
1
2
3
4
4
REMIR
REMIR SE
SENS
NSOR
OR
INP INPUT
UT
12 12V
+—— –
6’(DC POWER CORD)
16’(REMIR)
To DC12V and GROUND
VIDEOVIDEOCASSCASSETTEETTEPLAYPLAYERER
POWERPOWER STOP/ESTOP/EJECTJECT PAUSEPAUSE REWREW PLAYPLAY F.FWDF.FWD AUTOAUTO
REPEATREPEAT
DEWDEW
LEDLED
(VCP)
(LCD)
REPEATREPEAT
3’
3’
(IR REPEATER CABLE)
SENSOR
VIDIDEO L AUDIOIO RR
ENTER
DISISPLAY
NEXT
OPEN
CLOSE
STOPPLAY
PREV
POWER
(DVD)
(VCP)
JST
SOCKET
3’
(VCP)
JST
SOCKET (LCD)