Audiovox ACA240 Instruction Manual

1
8

Note: Because this is a wireless system, the monitor is always watching
for a video signal. It is possible to receive signals from other cameras.
Systems such as Security camera's, Baby monitors, and even other Back
up camera systems can trigger the monitor to briefly turn on. This is
normal for wireless products. If you find you have too much activation
due to video signals in your area, use the included Monitor Power wire
and run it to the rear of the vehicle. Attach it to the same power source
as the camera, this will insure the monitor will only come on when you
are in reverse and will eliminate any false signals.
Electrical Connections

7
are correct; first engage the emergency brake on the vehicle. Make
sure the car is not running but the ignition is switched on and have
another person engage the brake pedal, shift into reverse and insur-
ing your safety, check the wires with a test lamp.
6