Audiovox CarStream User manual

CarStream
I tJ "T""()(~)"~fH & SATELLITE RADIO
INTEGRATION KIT
for selected Honda/Acura vehicles
Installation Guide/User manual

Copyrights and Trademarks
Copyright 2015 VOXX Electronics Corporation
All Trademarks and Logos are the property
of
their respective owners.
All rights reserved.

Table
of
Contents
Warning and safety
...
.......................................................4 Operation ..............................................................
..
.......... 19
Product registration .........................................................5 Managing Multiple calls ....................................................
20
Kit contents ......................................................................6 Music Control ...................................................................
21
DIP switch overview .........................................................7 Audio Streaming ...............................................................
22
DIP switch settings ..........................................................8 Auxiliary audio source ......................................................23
Note to Installer ...............................................................9 Optional remote controller ...............................................
24
Connection diagram -Bluetooth and AUX ....................10 Troubleshooting .........................................................25-26
Connection diagram -Bluetooth and Satellite ...............
11
Firmware update .........................................................27-28
Installation .................................................................
12-13 Auxiliary audio source .......................................................28
Controls and Indicators ................................................14 Warranty ..........................................................................
30
Bluetooth I AUX operation
in
CDC mode ....................15 FCC Compliance ..............................................................
31
Bluetooth I AUX operation
in
SAT mode .....................16
SiriusXM operation
in
SAT mode ................................17
Pairing Your Phone .......................................................18

Warning
and
safety!
Please read these instructions carefully before proceeding. Failure to follow instructions may result
in
improper operation
or
injury. VOXX Electronics Corporation, its regional offices, distribuotrs or resellers
won't take any responsibility for any damage
or
injury as a result
of
using the integration kit.
-Do not open, disassemble
or
alter the interface
in
any way.
-Do not insert anything into the casing.
-Do not cut
or
try to alter cables
in
any way and always use the correct connections.
-Only
operate unit when stationary
or
ask passengers to operate it for you.
-Do not allow the Mobile Phone to distract you from driving.
-Exercise
good judgement and keep your eyes on the road at all times.
-Do not expose unit to extreme temperatures, humidity
or
shock.
X
X
-Keep away from children! -Interface components may contain small parts, can be broken or disassembled
and components may become loose from vibration and heat. Small components and packaging materials
may be a choking hazard when handled by children.

AUD
I
o,~ox
GD
ti'li~
l'.®l~(
um'il·-~llltll
ll
ll15
1~fl
t~il~1~ala
-it
~fJ1~
t
·
~~~~~~
rl~
5
~,
Congratulations
on
your
purchase!
Thank you for purchasing this integration kit. Please review this booklet before operating the unit. This
interface was designed and manufactured to seamlessly integrate with your vehicle's factory audio system.
Product
registration
We recommend registering yourAudiovox product so you can receive news about important firmware updates
and have unlimited access to our online support system.
To
register your Audiovox product, please complete the following steps:
1.
Visit http://www.audiovoxoei.com
2.
Look up and save the serial number
of
the product.
3.
Complete the product registration form.
4. Submit the form.
5.
Save the registration sheet
in
a safe place for future reference.
If you are unable to complete the registration via internet, please call VOXX Electronics at 1-800-645-4994.
Prior to installation make sure the module's firmware is up to date to ensure compatibility
with the latest features and enhancements. Please refer to page 28 to update firmware.

6
CarStream
kit
contents
CarStream module Vehicle Interface
Harness
Optional accessories (sold separately):
AUX connector
(AACC106AUX) IR Receiver &
Remote controller
(AACC613RCK)
BCS1M Bluetooth
module
Adapter cable for
SXV200/300 tuner
(AACCSATCBL)
~
·
@
Clip and 2-sided mount
For more accessories, visit
www
.audiovoxoei.com

DIP
switch
overview
The configuration switches located on the CarStream module are used to set various operation modes
of
the interface. Incorrect DIP switch settings may cause the interface not to operate properly or at all.
Disconnect the vehicle harness from the module and set the ignition to the off position for
60 seconds after changing the switches then reconnect the module!
CarStream module
~~-~oFF
~l-IoN
1 2
ON/OFF
Switch
Positions

DIP
switch
settings
The following DIP switch settings are used to configure the CarStream module to interface with
the various radio systems. Before installation, set the DIP switch to the position shown for the
corresponding radios and desired features.
Car configuration switches
CD
changer
(CDC)
Satellite (SAT)
I
IOFF
I
IOFF
~ON
~ON
Use for radios that have Use on radios with SAT
integrated satellite radio or or XM button for best
do not support SAT mode. experience. Must be
External CDC (trunk or glove selected to support SiriusXM
box) must be disconnected. Vehicle tuner. Available
Text display
is
not
available
on North American radios.
in
this
emulation. SiriusXM
option is NOT supported in
this mode.

Attention
installer!
Please
read
the
following!
Audiovox
strongly
recommends that the
unit
be installed in an easily accessible location!
DO NOT
PLACE
IT BEHIND THE RADIO
AND
DO NOT HIDE UNDER CARPET!
Whether the unit is professionally or self installed, put the module where you, the end user can get to it easily
in
the future. (Have the installer show you where the interface module is installed.)
Installing the module behind the radio will make it difficult to:
-Add possible future upgrades, changing software, adding new features, improving operation;
-Access the AUX input on the module to attach any audio device;
-Access the DIP switches located on the module;
-Remove the unit in case
of
failure.
MAKE
SURE THAT THE MODULE IS IN
AN
ACCESSIBLE
LOCATIONI

Connection
diagram
-
Bluetooth
and
AUX
inputs
CarStream module
(front) Vehicle Inter-
face Cable
Auxiliary device
(not included)
AUX cable
(optional)
0
[>
t
CarStream module
(back)
EJo
~
~
l,____,
Upgrade Port Bluetooth module
USB to
PC
or MAC computer
*
Do not connect the Bluetooth module under any circumstance to the SIRIUS module
connectorllmproper connection can cause permanent damage to Bluetooth/lnterface module.

Connection
diagram
-
Bluetooth
and
Satellite
inputs
CarStream Module
(front)
IR Receiver
(optional)
Vehicle Connector
Use Legacy SIRIUS
SCC1 Tuner
or
SiriusXM Vehicle Tuner
(Not included)
------~~-=gc::o--.....o4C
~~ceru"J
Adapter cable
AACCSATCBL
(optional)
CarStream Module
(back)
EJo
~
~
l,___,
Upgrade Port
USB to PC Bluetooth Module
or MAC computer
*Do not connect the Bluetooth module under any curcumstance to the SIRIUS connector!
Improper connection will cause permananet damage to the Bluetooth
I Interface module.

Installation
1.
Verify compatibility
5.
Route kit to glove box
or
other accessible location
2.
Disconnect battery
6.
Connect Bluetooth module
3.
Remove radio from car
(
{i
:)
fl
~-:E!J
+--
--+
4.
Set DIP switches for desired
mode and Install car specific harness
@~1~-1
~-:E1-~
Continue on next page,
;
~

7.
Mount the microphone in a suitable location as per the illustration.
Use the included 2-sided tape
or
the clip. Make sure the microphone
is directly facing the drivier.
___
__
__
_
___
___)
8.
Complete install by re-installing radio
•
e Optimal Stickey Mount
A Acceptable Stickey Mount
X Clip Mount
®AVOid
9.
Complete install by re-installing radio

is\i)~W
4!~
1
1:~~
4
y.::>i!V!J:i
W'*}\(i0\%:r,\1
1\·~!!{:1i~f
tii~:l~~~~~:ll
::~f:!!.t!~~~~'
$?~llil1flr£
~'V:mr!fll
,)!:fui:'i~l:~Eif
J;-ifn1~0
1'4t
W
\:1i%
0!:9i
A
UD
I0
,,
..
0 X
e
Controls and Indicators
1.
Light Ring
1 Unlit -unit is off.
Red -unit is disconnected.
2 Blue -unit is connected.
Alternating red and blue -unit is
in
pairing mode.
3 2. Multi-Function Button
3.
Built-In Microphone
----
4 4. OffI On
It
(Biuetooth) Switch
Slide down to OFF to turn the unit off.
Slide up to
ON
to turn the unit on.
Slide up to t to initiate pairing mode.

Bluetooth
I
AUX
operation
in
CDC
emulation
mode:
Much like the radio's AMIFM tuner
or
CD player, CarStream is integrated to be part
of
the factory audio system.
1.
Select CDC mode on the radio using the source selector button. The display will show DISC1 I TRACK 99
At this time the AUXILIARY INPUT PORT OF THE CARSTREAM MODULE is enabled. Phone call or Bluetooth
music streaming will automatically take over the AUX input.
Source select Pickup
I Hang-up
~
((
~~
CD)
TAPE
C J
omc~~
I
p~~R
I
~
Cl~
I
iUIG
[0[
D
-0
I
SCAN
I
I
TUNE
lill+l
r-9;]
RPT
PUSHMOOE
0 I
~'10
SEEK
SKIP
!+Ill
REW
I
PLAY2ROG
I
FF
I
NR
I
DISC-
I
[HEr
j
1 3
4 5
'-----' H M R

Bluetooth I AUX operation in SAT emulation mode:
Much like the radio's AM/FM tuner or CD player, CarStream is integrated to be part of the factory audio system.
1. Select SAT radio mode on the radio using
the source select button.
The display will show 'AUX' until Bluetooth
streaming
or hands-free calling becomes active.
At that time 'BCS1' will be displayed.
Ifthere is a Satellie radio tuner connected to
the CarStream module, Satellite radio will play
and channel information will be displayed until
Bluetooth streaming
or hands-free calling
becomes active.
At that time 'BCS1' will be displayed.
Note: CallerID I Song title will not be displayed.
Source select
Pickup I Hang-up
Honda/Acura non-NAV radio

SiriusXM
operation
in
SAT
emulation
mode:
Much like the radio's AMIFM tuner
or
CD player, CarStream is integrated to be
part
of
the factory audio system.
When a compatible satellite radio vehicle tuner
is connected to CarStream, it operates in a
seamles way.
To
tune channels, use the TUNE button.
To
save
presets, simply press & hold the preset buttons.
The DISP button toggels the screen between the
available messages.
When a call is received, the CarStream switches
over
to Bluetooth automatically.
Source select
GJ
~--
~
,._,
~
IT
11:5~
~
Channel
@)
02 HITS I change
I
Presets

~~~
5
~
1
.
1~
S
%
·
~
~
~~·~~
~
~
~
~~~~~
,
~
~
~mM~
~
~
:~
'~~
AUDIO,~ox~
~5~
~
~r~
1::;~
;~~
~~~t
~t"
~
•
t.x~.~~
~
~~
~
~~~
.(
~
j~
~~
~
~~:~~~~·>~~<·
Pairing Your Phone
Your mobile phone can initiate a search for the BCS1M.
Note: The following procedures are generic. Procedures for pairing mobile phones may vary. Please
refer to the manual that came with your mobile phone.
1.
Turn the BCS1M on and slide the 6utton slider up to
the*
(Biuetooth) position. The light bar will
flash red and blue alternatively.
2. Access the mobile phone's Bluetooth function and turn the function on.
3.
Set the mobile phone's Bluetooth discover mode to on.
4.
Use the mobile phone's add new device feature. "Biuetooth car kit" will appear on your mobile
phone's device list.
5.
A prompt to pair should appear on your mobile phone. Accept the request to initiate the process.
6.
Some mobile phones require a PIN to connect. Ifasked, enter "0000".
7.
A message stating that pairing is successful should appear on your mobile phone. A prompt
asking you to connect should also appear. Accept the request to initiate the connection.
8.
Once connected, the light bar will turn a solid blue.

Operation
Activating Voice Assistant (Siri I Google Voice I Voice Dial)
To
activate the Voice Assistant feature
of
the mobile phone (if available), press and hold the multi-function
button for 2-3 seconds and then release
it.
Compatible Apple iPhone
45
or later model will trigger a
Siri session. Google Voice may be available on select Android phones. Feature must be enabled on phone.
Managing Phone Calls
To
make a call:
• Place calls as you normally do on your phone. The call audio will be heard through your car stereo.
To
make a call using voice-dialing:
•
If
your phone supports voice-dialing, press and hold the multi-function button for
2-3
seconds, and
then release the multi-function button.
You
should hear your phone prompt you for a command.
To
answer a call:
• When an incoming call is detected, the light ring will blink blue.
• Tap the multi-function button to answer the call. The light ring will return to solid blue.

Managing Multiple Calls/Caii-Waiting
To
answera second incoming call:
•
Tap
the multi-function button to answer the second call and end the first.
• Double-tap the multi-function button to answer the second call and put the first call on hold.
• Tap the multi-function button three times to reject the call.
To
switch between
two
calls:
• Double-tap the multi-function button.
To
end the call on hold:
• Tap the multi-function button three times.
To
end the second call:
• Double-tap the multi-function button.
• Tap the multi-function button to end the current call.
Multi-Function button