Auriol Z30398 User manual

FUNK-WETTERSTATION
Bedienungs- und Sicherheitshinweise
Z30398
RADIO-CONTROLLED WEATHER STATION
Operation and Safety Notes
7
VREMENSKA STANICA
Upute za posluživanje i za Vašu sigurnost
ΑΣΥΡΜΑΤΟΣ ΜΕΤΕΩΡΟΛΟΓΙΚΟΣ ΣΤΑΘΜΟΣ
Υποδείξεις χειρισμού και ασφαλείας
STAţIE METEO RADIO-REgLATă
Instrucţiuni de utilizare şi de siguranţă
МЕТЕОРОЛОГИЧНА СТАНЦИЯ С РАДИОКОНТРОЛ
Инструкции за обслужване и безопасност

GB/CY Operation and Safety Notes Page 7
HR Upute za posluživanje i za Vašu sigurnost Stranica 24
RO Instrucţiuni de utilizare şi de siguranţă Pagina 41
BG Инструкции за обслужване и безопасност страница 58
GR/CY Υποδείξεις χειρισμού και ασφαλείας Σελίδα 77
DE/AT / CH Bedienungs- und Sicherheitshinweise Seite 96

3
A
1 42
3
5
6
8
11
12
13 7
9
10

4
B
14 1415 1516 1617 1718 1819 19
20

5
C
21

6
D22
23
24

7GB/CY
Table of Contents
Introduction
Proper Use ..................................................................................................................................Page 8
Description of parts ....................................................................................................................Page 9
Technical Data............................................................................................................................Page 10
Scope of Supply.........................................................................................................................Page 11
Safety
General Safety Information .......................................................................................................Page 11
Safety Instructions for Batteries..................................................................................................Page 12
Before Initial Use
General information...................................................................................................................Page 13
Setting up the external sensor....................................................................................................Page 14
Putting the weather station into operation............................................. Page 15
Operation
Setting the time/ date manually ................................................................................................Page 16
Displaying DST summertime.......................................................................................................Page 17
Setting the alarm.........................................................................................................................Page 17
Turning the alarm on/ off...........................................................................................................Page 17
Using the snooze function..........................................................................................................Page 17
Displaying the Temperature.......................................................................................................Page 18
Displaying the Humidity.............................................................................................................Page 18
Setting up the weather forecast function...................................................................................Page 19
Calling up the minimum/ maximum temperature values .........................................................Page 20
Error Messages..................................................................................................................Page 21
Cleaning and Maintenance.....................................................................................Page 21
Disposal....................................................................................................................................Page 22
Declaration of Conformity.......................................................................................Page 23

8 GB/CY
Introduction
Radio-controlled weather station
Q
Introduction
Familiarise yourself with the product before using it for the first time. In addition
please refer carefully to the operating instructions below and the safety advice.
Use the product only as described and for the indicated purpose. Keep these
instructions in a safe place. If you pass the product on to anyone else, please ensure that
you also pass on all the documentation.
Q
Proper Use
The radio controlled weather station displays the indoor and outdoor temperature in
Celsius (°C) or Fahrenheit (°F) and the indoor humidity in % RH (% relative humidity), as
well as their maximum and minimum values. Further readings of the weather station are the
weather forecast, the time in the 12/24-hour format and the date. Additionally, the radio
controlled weather station has a calendar, an alarm with snooze function and a setting for
the world time zone. Any other use or modification of the instrument constitutes improper use
and may result in injury and /or damage to the instrument. The manufacturer is not liable
for damage caused by improper use. The device is not intended for commercial use.

9GB/CY
Introduction
Q
Description of parts
Weather Station (Fig. A + B)
1Time
2symbol (radio reception)
3symbol (DST/summer time)
4Date (day/month)
5Temperature trend
6Channel display for outdoor sensor
7Symbol for reception from the outdoor sensor
8Outdoor temperature
9Current day
10 Symbols for the weather forecast
11 Humidity (% RH) (indoor)
12 Indoor temperature
13 Symbol for current weather
14 SET button
15 ALARM button
16 +/MEM button
17 –/°C /°F/WAVE button
18 CH button
19 SNOOZE button
20 Battery compartment
Outdoor Sensor (Fig. C + D)
21 Control LED
22 Suspension device

10 GB/CY
Introduction
23 Switch for the outdoor sensor channel (1, 2 or 3)
24 Battery compartment
Q
Technical Data
Weather Station:
Temperature measurement range
(indoor temperature): 0 to +50°C
+32 to +122°F
Temperature resolution: 0.1°C
Measuring range humidity: 20-99 %
Resolution humidity: 1%
Radio signal: DCF
Battery: 2x AA 1.5V (included in delivery scope)
Outdoor Sensor:
Temperature measurement range: –20 to +60°C
–4 to +140°F
HF transmission signal: 433MHz
HF transmission range: max. 30 metres in open space
Battery: 2x AA 1.5V (included in delivery scope)
System of protection: IP 44 (splash-proof)

11GB/CY
Introduction/Safety
Q
Scope of Supply
Please check the supplied items immediately after unpacking the device to ensure that there
is nothing missing and that the product and all of its parts are in perfect condition.
1 Radio controlled weather station
1 Outdoor sensor
1 Base (weather station)
4 Batteries AA 1.5V
1 Operating Instructions
Safety
WARNING!Read all safety information and instructions. Failure to comply with the
safety information and instructions may cause fire and/or serious injury.
YOU SHOULD STORE ALL SAFETY INFORMATION AND INSTRUCTIONS IN A SAFE
PLACE IN CASE YOU NEED TO REFER TO THEM AGAIN IN THE FUTURE!
General Safety Information
J WARNING!DANGER TO LIFE AND ACCIDENT HAZARD FOR
TODDLERS AND SMALL CHILDREN! Never allow children to play
unsupervised with the packaging material. There is a danger of suffocation

12 GB/CY
Safety
from the packaging material. Children frequently underestimate the dangers. Children
should be kept away from the product at all times. This is not a toy.
mDANGER TO LIFE! Batteries can be swallowed, which may represent a danger to life.
If a battery has been swallowed, medical help is required immediately.
J Children or persons who lack the knowledge or experience to use the device or whose
physical, sensory or intellectual capacities are limited must never be allowed to use the
device without supervision or instruction by a person responsible for their safety. Children
must never be allowed to play with the device.
J Do not use the device in hospitals or medical facilities, as otherwise this may result in
malfunctions of life-support systems.
J Do not expose the device to an extremely high electromagnetic field. This may impair
the correct functioning of the device.
J Please note that the guarantee does not cover damage caused by incorrect handling,
non-compliance with the operating instructions or interference with the device by
unauthorised individuals.
Safety Instructions for Batteries
J Remove the batteries from the device if they are not going to be used for a prolonged
period.
J CAUTION! DANGER OF EXPLOSION! The batteries must never be
recharged!
J When inserting the batteries, ensure the correct polarity! This is shown in the battery
compartments.
J If necessary, clean the batteries and device contacts before inserting the batteries.

13GB/CY
Safety/Before Initial Use
J Remove spent batteries immediately from the device. There is an increased danger of leaks!
J Batteries must not be disposed of in the normal domestic waste!
J Every consumer is legally obliged to dispose of batteries in the proper manner!
J Keep batteries away from children; do not throw them in the fire, short-circuit them or
take them apart.
J Always replace all the batteries at once.
J Use batteries of the same type only.
J If the batteries have leaked inside your device, you should remove them immediately in
order to prevent damage to the device!
J Avoid contact with the skin, eyes and mucous membranes. Any parts of the body
coming into contact with battery acid should be rinsed off with copious amounts of
water and/or a doctor contacted if necessary!
Q
Before Initial Use
Q
General information
mCAUTION! When choosing where to position the weather station, make sure that it
is not exposed to direct sunlight, vibrations, dust, heat, cold or moisture. Do not place
the weather station or external sensor near to heat sources, e.g. radiators, as this may
result in damage to the instruments.
j Do not place the devices near sources of interference such as television sets, computers,
thick walls, thermopane windows etc. Otherwise the transmission of radio waves between
the devices may be impaired.
j Please ensure that neighbouring devices are not operated at the same frequency of
433MHz. Such devices may cause interference to the radio connection.

14 GB/CY
Before Initial Use
j Do not place the devices next to or on metal plates. Otherwise the quality of radio
wave transmission may be reduced.
Radio signal (DCF):
The DCF signal (time signal transmitter) is made up of time pulses transmitted from one of
the highest precision clocks in the world close to Frankfurt/Main in Germany - it varies by
1 second in 1 million years. In ideal conditions, your weather station can pick up this signal
over a distance of up to approx. 1,500km around Frankfurt/Main.
Q
Setting up the external sensor
Inserting/changing the battery:
j Remove the battery compartment cover on the back of the outdoor sensor (see Figure D).
j Insert two 1.5V batteries (AA) (supplied) in the battery compartment 24 .
Note: Ensure the correct polarity. This is shown in the battery compartment 24 .
j Set the switch 23 to 1, 2 or 3 in order to select the desired outdoor sensor channel.
The outdoor sensor is now ready to operate and the control LED 21 lights up briefly.
j Close the cover of the battery compartment.
Note: Select a covered location for the outdoor sensor and do not position it in the
immediate vicinity of the weather station (e.g. separated by a wall). Make sure the
outdoor sensor does not come into contact with water or direct sunlight. Electronic
devices can interfere with the radio reception.

15GB/CY
Before Initial Use/Putting the weather station into operation
Mounting the outdoor sensor on the wall:
Note: You will need an electric drill for this step of the installation.
mCAUTION! DANGER TO LIFE, RISK OF INJURY AND MATERIAL DAMAGE!
Read the operating and safety instructions for your drill carefully.
WARNING!DANGER TO LIFE! Take care that you do not hit electricity, gas or
water lines when you drill into the wall. If necessary, check with a pipe and cable detector
before drilling.
Q
Putting the weather station into operation
Inserting the battery:
j Open the battery compartment 20 on the back of the weather station.
j Insert two 1.5V batteries (AA) (supplied) in the battery compartment 20 .
Note: Ensure the correct polarity. This is shown in the battery compartment 20 .
j Close the cover of the battery compartment.
j Remove the protective film from the LC display of the weather station.
Once the batteries are inserted, the weather station starts to receive the outdoor sensor signal.
This process does not take more than 3 minutes. During this time the reception symbol of
the outdoor sensor 7flashes. After successful reception of the outdoor sensor signal the
weather station starts to receive the DCF radio signal. This process may take up to 5 minutes
and is shown in the LC display by the flashing symbol 2.
Reception may be seriously restricted by certain obstacles (e.g. concrete walls) or sources
of interference (e.g. other electrical devices). If interference with reception of the radio signal
continues, you can also set the time and date manually (see “Setting the time/date manually”).

16 GB/CY
Putting the weather station into operation/Operation
Reception of the DCF radio signal can be stopped and restarted by pressing and holding
down the –/°C/°F/WAVE button 17 . If reception fails, change the location of the weather
station and try again to receive the radio signal.
Q
Operation
Reception of the DCF radio signal may be disrupted or interrupted at the location of the
weather station. In this case you are able to set the instrument manually.
Q
Setting the time/date manually
1. Press and hold down the –/°C/°F/WAVE button 17 approx. 2 seconds in order to
stop reception of the DCF radio signal (see Figure B).
2. Press and hold down the SET button 14 in order to change to the settings mode. The
time 1flashes. In order to select the 24 or 12-hour format, press the +/MEM button 16
or the -/° C/ ° F/WAVE button 17 .
3. Press the SET button 14 to confirm what you have entered.
4. Repeat steps 2 and 3 in order to set the values for the year, date (day and month) 4,
current day 9(in EN or DE), hours, minutes and time zone. If you do not press any
button approx. 15-20 seconds, the weather station will automatically exit the settings
mode.
Note: If you are in a country in which the DCF signal is still being received, but where
the current time differs, you can use the time zone setting function to adjust the clock to
the current time.

17GB/CY
Operation
Q
Displaying DST summertime
Summertime is automatically displayed on the LCD by the icon 3. The DCF radio signal
indicates to the clock whether or not it is summertime.
Q
Setting the alarm
j Stop the reception of the DCF radio signal.
j Press and hold down the ALARM button 15 . The hour display flashes.
j In order to enter the hours figure, press the +/MEM button 16 or the –/°C/°F/WAVE
button 17 . Confirm your input by pressing the ALARM button 15 . Repeat this step to
enter the minutes.
Q
Turning the alarm on/off
j Stop the reception of the DCF radio signal.
j Press the ALARM button 15 in order to activate or switch off the alarm.
If the alarm is activated, the alarm symbol appears in the LC display.
Q
Using the snooze function
j While the alarm is sounding, press the SNOOZE button 19 in order to activate the
snooze function. The alarm stops and then goes off again after a period of 5 minutes.

18 GB/CY
Operation
j Now press any button, with the exception of the SNOOZE button 19 , in order to turn
the alarm off.
Q
Displaying the Temperature
The LC display shows both the current indoor 12 and outdoor temperature 8.
j Stop the reception of the DCF radio signal.
j Press the –/°C/°F/WAVE button 17 in order to select the Celsius or Fahrenheit
temperature unit for the display of the weather station.
j Press the CH button 18 in order to select one of the three channels for the outdoor
sensor. The channel number appears in the channel display for the outdoor sensor 6.
j Press and hold down the CH button 18 for 3 seconds in order to restart reception.
Q
Displaying the Humidity
The current humidity 11 is shown on the LC display.
j Stop the reception of the DCF radio signal.

19GB/CY
Operation
Q
Setting up the weather forecast function
Note: please also listen to the weather forecast from your local weather service. If there
are discrepancies between the instrument and your local weather service, please go by
the local weather service forecast.
The weather station analyses the air pressure, humidity and outdoor temperature in order to
determine the weather forecast for the current day. It also analyses the weather of the current
day, the humidity and temperature to determine the weather for the next four days. The
following weather symbols are available for this:
sunny
partly sunny
cloudy
rain

20 GB/CY
Operation
sleet
snow
After you have inserted the batteries, the weather station needs 12 hours to collect the data
that is necessary to determine the weather. Subsequently the accuracy of the weather forecast
improves.
The accuracy of the weather forecast can also be improved by placing the weather station
in a location that receives plenty of natural ventilation. Indoor use increases the likelihood
of errors – especially when air conditioners are used.
Q
Calling up the minimum/maximum temperature values
j Stop the reception of the DCF radio signal.
j Press the +/MEM button 16 in order to display the minimum/maximum values for the
indoor and outdoor temperature. The abbreviations MIN and MAX appear above the
displayed values.
j Press and hold down the +/MEM button 16 for 3 seconds in order to reset the stored
values. A beep confirms that the setting was successful.