Autel MaxiLink ML519 User manual

Email: [email protected]
Web: www.autel.com MaxiLink ML519
Getting Started
Connect the OBD II cable’s 16-pin male adapter to the
Vehicle’s DLC which is generally located under the vehicle
dash.
The device will be automatically powered up.
1 2
3 4
IMPORTANT: Before operating or maintaining this unit, please read these instructions carefully. Use this unit
correctly and properly. Failure to do so may cause damage and/or personal injury and will void the product
warranty.
Your MaxiLink ML519 is now ready to work.
Connect the OBD II cable’s female adapter to the MaxiLink
ML519
Tighten the captive screws.
Scan QR Code to visit our website at www.autel.com.
Create an Autel ID and register the product with device’s
SN and password.
Thank you for purchasing AUTEL tool. Manufactured to a high standard, our tool will, if used according to these
instructions and properly maintained, give you years of trouble-free performance.
Quick Reference Guide

In the Update window, select the appropriate files to install.
Software Update and Delete
Please download the Maxi PC Suite from
www.autel.com > Support & Updates > Firmware & Downloads > Update Client, and install to your
Windows-based computer.
1 2
Run the Maxi PC Suite.
Connect the device with the computer using the included USB
cable.
Select Update Mode in the tool.
© Autel Intelligent Technology Corp., Ltd. All Rights Reserved.
http://pro.autel.com / www.autel.com / [email protected]
0086-755-86147779 (China HQ) / 1-855-288-3587/1-855-AUTELUS (North America)
0049 (0) 61032000522 (Europe) / ([phone] (South America) / 03 9480 2978 / [phone] (Australia)
For service and support, please contact us.
Connect the device to the computer with the USB cable supplied.
Run Autel Printer on the computer which is installed after the installation of Maxi PC Suite.
Select Playback function in the Main Screen of the tool. On the data menu screen, use the UP/DOWN scroll button to
select the data you want to print. Wait for the review window to display, and then select Print function.
The selected data will display on the textbox of the Autel Printer. By selecting the function keys on the right, you could
execute the following operations:
Print – print all data in the textbox. ( A printer should be connected to the computer. )
Edit – display an editable NOTEPAD window with recorded data.
Copy – copy data in the textbox to the clipboard.
Clear – delete data in the textbox.
Exit – quit the operation.
Data Printing