Autel MaxiCheck MX808TS User manual

i
Trademarks
Autel®, MaxiSys®, MaxiDAS®, MaxiScan®, MaxiCheck®, MaxiRecorder®, and
MaxiCheck®are trademarks of Autel Intelligent Technology Corp., Ltd., registered in
China, the United States and other countries. All other marks are trademarks or
registered trademarks of their respective holders.
Copyright Information
No part of this manual may be reproduced, stored in a retrieval system or transmitted, in
any form or by any means, electronic, mechanical, photocopying, recording, or otherwise
without the prior written permission of Autel.
Disclaimer of Warranties and Limitation of Liabilities
All information, specifications and illustrations in this manual are based on the latest
information available at the time of printing.
Autel reserves the right to make changes at any time without notice. While information of
this manual has been carefully checked for accuracy, no guarantee is given for the
completeness and correctness of the contents, including but not limited to the product
specifications, functions, and illustrations.
Autel will not be liable for any direct, special, incidental, indirect damages or any
economic consequential damages (including the loss of profits).
IMPORTANT
Before operating or maintaining this unit, please read this manual carefully, paying extra
attention to the safety warnings and precautions.
For Services and Support
pro.autel.com
www.autel.com
1-855-288-3587/1-855-AUTELUS (North America)
0086-755-86147779 (China)
[email protected]
For technical assistance in all other markets, please contact your local selling agent.

ii
Safety Information
For your own safety and the safety of others, and to prevent damage to the device and
vehicles upon which it is used, it is important that the safety instructions presented
throughout this manual be read and understood by all persons operating or coming into
contact with the device.
There are various procedures, techniques, tools, and parts for servicing vehicles, as well
as in the skill of the person doing the work. Because of the vast number of test
applications and variations in the products that can be tested with this equipment, we
cannot possibly anticipate or provide advice or safety messages to cover every
circumstance. It is the automotive technician’s responsibility to be knowledgeable of the
system being tested. It is crucial to use proper service methods and test procedures. It
is essential to perform tests in an appropriate and acceptable manner that does not
endanger your safety, the safety of others in the work area, the device being used, or the
vehicle being tested.
Before using the device, always refer to and follow the safety messages and applicable
test procedures provided by the manufacturer of the vehicle or equipment being tested.
Use the device only as described in this manual. Read, understand, and follow all safety
messages and instructions in this manual.
Safety Messages
Safety messages are provided to help prevent personal injury and equipment damage.
All safety messages are introduced by a signal word indicating the hazard level.
DANGER
Indicates an imminently hazardous situation which, if not avoided, will result in death or
serious injury to the operator or to bystanders.
WARNING
Indicates a potentially hazardous situation which, if not avoided, could result in death or
serious injury to the operator or to bystanders.
Safety Instructions
The safety messages herein cover situations Autel is aware of. Autel cannot know,
evaluate or advise you as to all of the possible hazards. You must be certain that any
condition or service procedure encountered does not jeopardize your personal safety.
DANGER
When an engine is operating, keep the service area WELL VENTILATED or attach a
building exhaust removal system to the engine exhaust system. Engines produce carbon

iii
monoxide, an odorless, poisonous gas that causes slower reaction time and can lead to
serious personal injury or loss of life.
SAFETY WARNINGS
Always perform automotive testing in a safe environment.
Wear safety eye protection that meets ANSI standards.
Keep clothing, hair, hands, tools, test equipment, etc. away from all moving or hot
engine parts.
Operate the vehicle in a well-ventilated work area, for exhaust gases are poisonous.
Put the transmission in PARK (for automatic transmission) or NEUTRAL(for manual
transmission) and make sure the parking brake is engaged.
Put blocks in front of the drive wheels and never leave the vehicle unattended while
testing.
Be extra cautious when working around the ignition coil, distributorcap, ignition wires
and spark plugs. These components create hazardous voltages when the engine is
running.
Keep a fire extinguisher suitable for gasoline, chemical, and electrical fires nearby.
Do not connect or disconnect any test equipment while the ignition is on or the
engine is running.
Keep the test equipment dry, clean, free from oil, water or grease. Use a mild
detergent on a clean cloth to clean the outside of the equipment as necessary.
Do not drive the vehicle and operate the test equipment at the same time. Any
distraction may cause an accident.
Refer to the service manual for the vehicle being serviced and adhere to all
diagnostics procedures and precautions. Failure to do so may result in personal
injury or damage to the test equipment.
To avoid damaging the test equipment or generating false data, make sure the
vehicle battery is fully charged and the connection to the vehicle DLC is clean and
secure.
Do not place the test equipment on the distributor of the vehicle. Strong electro-
magnetic interference can damage the equipment.

iv
CONTENTS
SAFETY INFORMATION........................................................................................................II
SAFETY MESSAGES ...........................................................................................................II
SAFETY INSTRUCTIONS.......................................................................................................II
1USING THIS MANUAL ...................................................................................................7
CONVENTIONS...................................................................................................................7
2GENERAL INTRODUCTION ..........................................................................................8
MAXICHECK MX808TS TABLET..........................................................................................8
VCI —VEHICLE COMMUNICATION INTERFACE ....................................................................11
OTHER ACCESSORIES......................................................................................................13
3GETTING STARTED....................................................................................................14
POWERING UP................................................................................................................14
POWERING DOWN............................................................................................................17
4DIAGNOSTICS.............................................................................................................19
ESTABLISHING VEHICLE COMMUNICATION ..........................................................................19
GETTING STARTED ..........................................................................................................21
VEHICLE IDENTIFICATION ..................................................................................................22
NAVIGATION....................................................................................................................26
DIAGNOSIS......................................................................................................................29
GENERIC OBDII OPERATIONS ..........................................................................................40
EXITING DIAGNOSTICS......................................................................................................44
5SERVICE......................................................................................................................45
OIL RESET SERVICE ........................................................................................................45
ELECTRONIC PARKING BRAKE (EPB) SERVICE...................................................................48
BATTERY MANAGEMENT SYSTEM (BMS) SERVICE..............................................................50
STEERING ANGLE SENSOR (SAS) SERVICE .......................................................................55
DIESEL PARTICLE FILTER (DPF) SERVICE..........................................................................57
IMMOBILIZER (IMMO) SERVICE.........................................................................................63
6TPMS............................................................................................................................65
GETTING STARTED ..........................................................................................................65
VEHICLE SELECTION ........................................................................................................67
TPMS CHECK.................................................................................................................70
TPMS DIAGNOSIS...........................................................................................................71
SENSOR PROGRAMMING ..................................................................................................76
TPMS RELEARN .............................................................................................................81
TPMS BY OEMPART NO................................................................................................85

v
7BATTERY TEST...........................................................................................................89
MAXIBAS BT506 TESTER................................................................................................89
TEST PREPARATION.........................................................................................................91
IN-VEHICLE TEST .............................................................................................................92
OUT-VEHICLE TEST........................................................................................................100
8DATA MANAGER.......................................................................................................102
OPERATIONS.................................................................................................................102
9SETTINGS..................................................................................................................108
UNIT.............................................................................................................................108
LANGUAGE....................................................................................................................108
PRINTING SETTINGS.......................................................................................................109
REPORT SETTINGS ........................................................................................................109
MULTITASK ...................................................................................................................110
TPMS MARKET.............................................................................................................110
TPS PROG.SETTING.....................................................................................................110
AUTO UPDATE...............................................................................................................110
CAR ORDER..................................................................................................................111
SYSTEM SETTINGS.........................................................................................................111
ABOUT..........................................................................................................................111
10 UPDATE.....................................................................................................................113
TABLET UPDATE ............................................................................................................113
MAXIVCI MINI UPDATE ..................................................................................................115
11 VCI MANAGER...........................................................................................................116
12 SHOP MANAGER ......................................................................................................118
VEHICLE HISTORY..........................................................................................................119
WORKSHOP INFORMATION..............................................................................................120
CUSTOMER MANAGER....................................................................................................121
13 ACADEMY..................................................................................................................123
14 REMOTE DESK..........................................................................................................124
15 MAXIFIX .....................................................................................................................126
NAVIGATION..................................................................................................................126
OPERATIONS.................................................................................................................128
16 SUPPORT ..................................................................................................................134
PRODUCT REGISTRATION ...............................................................................................134
SUPPORT SCREEN LAYOUT.............................................................................................135
MY ACCOUNT................................................................................................................135

vi
COMMUNITIES ...............................................................................................................136
DATA LOGGING..............................................................................................................137
TRAINING......................................................................................................................137
FAQ ............................................................................................................................138
17 QUICK LINK ...............................................................................................................139
18 FUNCTION VIEWER..................................................................................................140
19 DIGITAL INSPECTION...............................................................................................142
ADDITIONAL ACCESSORIES .............................................................................................142
IMAGER HEAD ACCESSORIES ..........................................................................................143
ACCESSORY ASSEMBLY .................................................................................................144
TECHNICAL SPECIFICATIONS...........................................................................................145
OPERATIONS.................................................................................................................146
20 MAINTENANCE AND SERVICE ................................................................................148
MAINTENANCE INSTRUCTIONS.........................................................................................148
TROUBLESHOOTING CHECKLIST ......................................................................................148
ABOUT BATTERY USAGE ................................................................................................149
SERVICE PROCEDURES ..................................................................................................150
21 COMPLIANCE INFORMATION..................................................................................152
FCCCOMPLIANCE.........................................................................................................152
SAR ............................................................................................................................153
RFWARNING STATEMENT..............................................................................................153
ROHS COMPLIANCE ......................................................................................................153
CE COMPLIANCE...........................................................................................................153
22 WARRANTY...............................................................................................................154

7
1 Using This Manual
This manual contains device usage instructions.
Some illustrations shown in this manual may contain modules and optional equipment
that are not included in your system. Contact your sales representative for availability of
other modules and optional tools or accessories.
Conventions
The following conventions are used.
Bold Text
Bold text is used to highlight selectable items such as buttons and menu options.
Example:
Tap OK.
Notes and Important Messages
Notes
A NOTE provides helpful information such as additional explanations, tips, and
comments.
Important
IMPORTANT indicates a situation which, if not avoided, may result in damage to the test
equipment or vehicle.
Hyperlink
Hyperlinks are available in electronic documents. Blue italic text indicates a selectable
hyperlink and blue underlined text indicates a website link or an email address link.
Illustrations
Illustrations used in this manual are samples, the actual testing screen may vary for each
vehicle being tested. Observe the menu titles and on-screen instructions to make correct
option selection.

8
2 General Introduction
Together with the ability to quickly read and clear DTCs for all available modules of the
majority of the makes and models on themarket, MaxiCheck MX808TS provides superior
special functions, including Oil Reset, EPB (Electronic Parking Brake), SAS (Steering
Angle Sensor), BMS (Battery Management System) and DPF (Diesel Particulate Filter).
In addition to OBDII diagnostics and special functions, MX808TS can perform
comprehensive TPMS services with ease.
There are two main components of the MX808TS system:
MX808TS tablet —the central processor and monitor for the system.
MaxiVCI Mini (Vehicle Communication Interface) —the device for accessing vehicle
data.
This manual describes the construction and operation of bothdevices and how they work
together to deliver diagnostics solutions.
MaxiCheck MX808TS Tablet
Function Description
Figure 2-1 MaxiCheck MX808TS, Front View
1. 7.0”LCD Capacitive Touchscreen
2. Ambient Light Sensor —detects ambient brightness.
3. Power LED —indicates battery level & charging or system status.
4. TPMS Service Symbol —indicates the position of the embedded TPMS antenna.

9
The power LED displays green, yellow or green depending on power level and operating
state.
A. Green
Illuminates green when the tablet is charging and the battery level is above 90%.
Illuminates green when the tablet is powered on and the battery level is above
15%.
B. Yellow
Illuminates yellow when the tablet is chargingand the battery level is below 90%.
C. Red
Illuminates red when the tablet is powered on and the battery level is below 15%.
5. Collapsible Stand —extends from the back to allow hands-free viewing of the tablet.
6. Heat Sink
7. MaxiVCI Mini Holder
8. Built-in Battery
Figure 2-3 MaxiCheck MX808TS, Top View
9. Mini USB OTG Port
10. Micro SD Card Slot —holds the micro SD card.
11. HDMI (High-Definition Multimedia Interface) Port
12. USB Port
13. Lock/Power Button —turns the device on & off with long press, or locks the screen
with short press.
Figure 2-2 MaxiCheck MX808TS, Back View

10
Power Sources
The tablet can receive power from any of the following sources:
Internal Battery Pack
External Power Supply
Internal Battery Pack
The tablet can be powered with the internal rechargeable battery, which if fully charged
can provide sufficient power for about 7 hours of continuous operation.
External Power Supply
The tablet can be powered from a wall socket using the USB charging cable and the USB
external power adapter. The external power supply also charges the internal battery pack.
Technical Specifications
Table 2-1 Specifications
Item
Description
Recommended Use
Indoor
Operating System
AndroidTM 4.4.2, KitKat
Processor
Cortex-A9 processor (1.5 GHz)
Memory
64 GB
Display
7-inch LCD capacitive touchscreen with 1024 x 600
resolution
Connectivity
Mini USB 2.0
USB 2.0
Wi-Fi
HDMI Type A
Micro SD card (supports up to 32 GB)
Sensors
Light sensor for brightness auto changing
Audio Output
Buzzer
Power and Battery
3.7 V/5000 mAh lithium-polymer battery
Charges via 5 V DC power supply
Tested Battery Life
Around 7 hours of continuous use
Battery Charging Input
5 V/1.5 A
Power Consumption
600 mA (LCD on with default brightness, Wi-Fi on) @3.7 V

11
Item
Description
Operating Temp.
0 to 50 °C (32 to 122 °F)
Storage Temp.
-10 to 60 °C (14 to 140 °F)
Operating Humidity
5 % - 95 % non-condensing
Dimensions (W x H x D)
270.8 mm (10.0”) x 176.0 mm (6.9”) x 36.0 mm (1.4”)
Net Weight
885 g (2.31 lbs.)
Protocols
ISO9141-2, ISO14230-2, ISO15765, K/L-Line, Flashing
Code, SAE-J1850 VPW, SAE-J1850PWM, ISO11898
(Highspeed, Middlespeed, Lowspeed and Singlewire CAN,
fault-tolerant CAN), SAE J2610,GM UART,UARTEcho Byte
Protocol, Honda Diag-H Protocol, TP2.0, TP1.6
VCI —Vehicle Communication Interface
The wireless diagnostics interface MaxiVCI Mini is a small vehicle communication
interface (VCI) used to connect to a vehicle’s data link connector (DLC) and connect
wirelessly with the tablet for vehicle data transmission.
Function Description
1. Vehicle Data Connector (16-Pin) —connects the MaxiVCI Mini to the vehicle’s 16-
pin DLC directly.
2. Power LED —refer to Table 2-2 Power LED for details.
3. Connection LED —refer to Table 2-3 Connection LED for details.
4. USB Port —provides the easiest connection between the device and the tablet via
a USB cable.
Figure 2-4 MaxiVCI Mini Views

12
Table 2-2 Power LED
LED
Color
Description
Power
Green
Lights solid green when powered on.
Red
Blinks red when system failure occurs.
Note: The power LED briefly lights red each time the
device powers on and then lights green when the device
is ready.
Table 2-3 Connection LED
LED
Color
Description
Connection
Green
Lights solid green when the device is successfully
connected via the USB cable but is not
communicating with the vehicle.
Blinks green when the device is successfully
connected via the USB cable and is communicating
with the vehicle.
Blue
Lights solid blue when the device is successfully
connected via Bluetooth but is not communicating
with the vehicle.
Blinks blue when the device is successfully
connected via Bluetooth and is communicating with
the vehicle.
Technical Specifications
Table 2-4 Specifications
Item
Description
Communications
Bluetooth V.2.1 + EDR
USB 2.0
Wireless Frequency
2.4 GHz
Input Voltage Range
12 V DC to 24 V DC
Supply Current
150 mA @ 12 V DC
Operating
Temperature
0 °C to 50 °C (32 °F to 122 °F) (ambient)
Storage
Temperature
-20 °C to 70 °C (-4 °F to 158 °F) (ambient)

13
Item
Description
Dimensions
(L x W x H)
47 mm (1.7”) x 23 mm (0.9”) x 51 mm (2.0”)
Weight
33.1g (0.07 lb.)
Power Sources
The MaxiVCI Mini operates on 12-volt vehicle power, which is received through the
vehicle’s DLC. The unit powers on whenever it is connected to the vehicle’s DLC.
Other Accessories
USB Cable (for test)
2 m
USB Cable (for charging)
90 cm
USB External Power Adapter
Together with the mini USB cable, connects the tablet to
the external DC power port for power supply.

14
3 Getting Started
Ensure the tablet is sufficient charged or is connected to the external power supply (see
Power Sources).
NOTE
The images and illustrations depicted in this manual may differ slightly from the actual
ones.
Powering Up
Long press the Lock/Power button on the top right side of the tablet to power on the unit.
The power LED light will illuminate green. The system boots up and displays the lock
screen. Slide the Lock icon to the left to enter the MaxiCheck Job Menu or slide to the
right to unlock.
Figure 3-1 Sample MaxiCheck MX808TS Job Menu
1. Application Buttons
2. Locator and Navigation Buttons
3. Status Icons
NOTE
The tablet screen is locked by default when first powered on. It is recommended to lock
the screen to protect the information in the system and reduce the power consumption.
The touch screen navigation is menu driven enabling quickly access to functions and
features by tapping on options headings and answering dialog windows. Detailed
descriptions of the menu structures are found in the application chapters.

15
Application Buttons
Descriptions of the tool applications are displayed in the table below.
Table 3-1 Applications
Button
Name
Description
Diagnostics
Accesses diagnostics functions menu. See Diagnostics for
details.
Service
Accesses special functions menu. See Service for details.
TPMS
Accesses the TPMS service program. See TPMS for details.
Battery Test
Accesses the Battery Test menu with two functions, including
in-vehicle test and out-vehicle test. See Battery Test for
details.
Data
Manager
Accesses the organization system for saved data files. See
Data Manager for details.
Settings
Accesses the MaxiCheck system settings menu and general
tablet menu. See Settings for details.
Update
Checks for the latest update available for the MaxiCheck
system and performs updates. See Update for details.
VCI
Manager
Accesses VCI connection menu. See VCI Manager for
details.
Shop
Manager
Accesses Shop manager database to store workshop,
customer information and vehicle test history. See Shop
Manager for details.
Academy
Accesses technical tutorials and training articles about the
device and vehicle diagnostics techniques. See Academy for
details.
Remote
Desk
Configures the unit to receive remote support using the
TeamViewer application program. See Remote Desk for
details.
MaxiFix
Launches the MaxiFix platform which provides the most
compatible and abundant repair techniques and diagnostics
database. See MaxiFix for details.

16
Button
Name
Description
Support
Launches the Support platform which synchronizes Autel’s on-
line service base station with the MaxiCheck tablet. See
Support for details.
Quick Link
Provides associated website bookmarks to allow quick access
to product update, service, support and other information. See
Quick Link for details.
Function
Viewer
Provides quick search for the supported functions and
vehicles of Autel diagnostics tools. See Function Viewer for
details.
Digital
Inspection
Configures the unit to operate as a video scope device by
connecting to an Imager head cable for close vehicle
inspections. See Digital Inspection for details.
Locator and Navigation Buttons
Operations of the Navigation buttons at the bottom of the screen are described in the
table below:
Table 3-2 Locator and Navigation Buttons
Button
Name
Description
Locator
Indicates which screen you are on. Swipe the screen
left or right to view the previous or next screen.
Back
Returns to the previous screen.
Android Home
Returns to Android System’s Home screen.
Recent Apps
Displays a list of applications that are currently in use.
Tap an app icon to launch. To remove an app, swipe it
to the top or bottom.
Chrome
Launches the Android built-in browser.
Screenshot
Takes a screenshot when you want to save the
displayed information.
MaxiCheck
Home
Returns to MaxiCheck Job Menu from other
operations.

17
Button
Name
Description
VCI
Opens the VCI Manager application. The check at the
bottom right corner indicates the tablet is
communicating with the MaxiVCI Mini. An Xwilldisplay
if the tablet is not connected to VCI.
TPMS Shortcut
Returns to the TPMS screen.
Diagnostics
Shortcut
Returns to the Diagnostics screen.
Service
Shortcut
Returns to the Service screen.
System Status Icons
As the tablet is working with the Android operating system, you may refer to Android
documents for more information.
By up sliding the bottom right corner, a Shortcuts Panel will be displayed, on which you
are allowed to set various system settings of the tablet. Operations of each button on the
panel are described in the table below:
NOTE
The shortcuts buttons will be highlighted when enabled, and dimmed when disabled.
Table 3-3 System Status Icons
Button
Name
Description
Calculator
Launches calculator when pressed.
Clock
Launches clock when pressed.
BT
Enables/disables Bluetooth when pressed.
Wi-Fi
Enables/disables Wi-Fi when pressed.
Airplane Mode
Enables/disables Airplane Mode when pressed.
System Settings
Launches the Android System Settings screen
when pressed.
Powering Down
All vehicle communications must be terminated before shutting down the tablet. A
warning message displays if you attempt to shut down the tablet while itis communicating
with the vehicle. Forcing a shut-down while communicating may lead to ECM problems
on some vehicles. Please exit the Diagnostics application before powering down.

18
To power down the tablet
1. Long press the Lock/Power Button.
2. Tap Power off option.
3. Tap OK, the tablet will turn off in a few seconds.
Reboot System
In case of system crash, long press the Lock/Power button and tap Reboot option to
reboot the system.

19
4 Diagnostics
The Diagnostics application can retrieve ECU information, read & erase DTCs, and view
live data. The Diagnostics application can access the electronic control unit (ECU) for
various vehicle control systems, including engine, transmission, antilock brake system
(ABS), airbag system (SRS).
Establishing Vehicle Communication
The Diagnostics operations require connecting the MX808TS Diagnostics Platform to the
test vehicle through the MaxiVCI Mini. To establish proper vehicle communication to the
tablet, please perform the following steps:
1. Connect the MaxiVCI Mini to the vehicle’s DLC for both communication and power
supply.
2. Connect the MaxiVCI Mini to the tablet via Bluetooth pairing.
3. A green check will display atop the VCI navigation button at the bottom bar on the
screen. If communication has been established, the MX808TS is ready to start
vehicle diagnosis.
Vehicle Connection
The tablet communicates with the vehicle via the Bluetooth connection provided by the
MaxiVCI Mini.
To connect the MaxiVCI Mini to the test vehicle, simply insert the Vehicle Data Connector
on the MaxiVCI Mini into the vehicle’s DLC which is generally located under the vehicle
dash and the MaxiVCI Mini will be automatically powered on.
NOTE
The vehicle’s DLC is not always located under the dash; refer to the vehicle’s user
manual for DLC location.
VCI Connection
The MaxiVCI Mini Power LED will light solid green when properly connected to the
vehicle and ready to establish communication with the tablet.
The wireless diagnostics interface MaxiVCI Mini supports 2 communication methods with
the tablet, wireless Bluetooth and USB.

20
Bluetooth Connection
Bluetooth pairing is recommended as the first choice for the communication between the
tablet and the MaxiVCI Mini. The working range for Bluetooth communication is about 33
feet (about 10 m), enabling remote vehicle diagnostics.
More than one MaxiVCI Mini to connect to the test vehicles, you can perform vehicle
diagnosis on various vehicles conveniently by pairing the tablet separately to each of the
MaxiVCI Mini devices connected to the different test vehicles via wireless BT. Without
the need to repeat the plugging and unplugging procedure which is unavoidable through
traditional wired connection, Bluetooth connection saves you more time and provides
higher efficiency.
USB Cable Connection
Use the provided USB cable to connect the tablet to the MaxiVCI Mini. A green check
will display atop the VCI navigation button at the bottom bar of the screen and the
MaxiVCI Mini Connection LED will light solid green when connection between the devices
is successful.
NOTE
The USB communication method will take priority over Bluetooth communication if both
are enabled.
No Communication Message
A If the tablet is not connected to the MaxiVCI Mini correctly, an “Error”message may
display. This indicates that the tablet cannot access the vehicle control module. In
this case, please do the following check-ups:
Check if the MaxiVCI Mini is powered up.
Check if the MaxiVCI Mini is properly positioned.
Check if the Connection LED on the MaxiVCI Mini is illuminated for Bluetooth
or USB.
In case of Bluetooth connection, check if the network is configured correctly, or
if the right MaxiVCI Mini has been paired up with the tablet.
If during the diagnosis process, the communication is suddenly interrupted
due to the loss of signal, check if there is any object that causes signal
interruption.
Try standing closer to the MaxiVCI Mini to obtain more stable signals and
faster communication speed.
In case of USB connection, check the cable connection between the tablet and
the MaxiVCI Mini.
Check if the Power LED onthe MaxiVCI Mini is flashing red and if so, it indicates
there is a hardware problem with the MaxiVCI Mini, in this case, contact