AVPro Edge AC-ADM-COTO User manual

Universal Digital/Analog Audio Converter with Out Decoder
AC-ADM-COTO
Quick Start Guide
The Universal Digital/Analog Audio Converter with Dolby® Digital& DTS®
2.0+Digital Out Decoder can convert among Optical, Coaxial and analog audio
signals. With the ability to convert digital signals into analog and analog signals
into digital, this device supports the simultaneous conversion of audio formats so
when converting Optical into analog audio you can also convert it into Coaxial.
Therefore, if you nd yourself limited by multiple audio formats the Universal
Digital/Analog Audio Converter with Dolby Digital & DTS 2.0+ Digital Out Decoder is
the perfect choice.
This quick start guide will be
going through:
• Installation
• Product breakdown
• Troubleshooting
Installation
1. PLug in the 5 V power supply included with the Ac-ADM-Coto.
2. Connect source (Dvd player, cable box, gaming console) via Optical in,
Coax in, and l/r in.
3. Connect outputs (tv, AVR) via Optical out, Coax out, and l/r out.
4. press the power button to turn on the device.
5. by using the input select switch, select which input type you would like to
output

2
Power LEd indicator
the led will illuminate in blue when the power is connected and
in red when switched off. When connected to an ac wall outlet
the unit will automatically turn on.
Dolby digital led indicator
when the source is dolby digital formatted the led will illumi
nate in red and will remain off in not.
l/r in led indicator
when selecting the l/r input, the blue led will turn on.
coax in led indicator
when selecting the coaxil input, the blue led will turn on.
optical in led indicator
when selecting the optical input, the blue led will turn on.
DTS 2.0+Digital Out led indicator
when the source is dts 2.0+Digital out formatted the led will
illuminate in red and will remain off if not
1 2 3 4 5 6
Optical in
used to Connect to the audio source’s coaxial output.
Coax In
used to Connect to the audio source’s coaxial output.
L/r in
used to connect to the analog audio source with a stereo rca cable.
Top pannel
right pannel

rear pannel
l/r out
used to connect to a compatible audio equipment. Such as a TV
or amplier with a stereo RCA cable.
coax out
used to Connect to an audio system’s coaxial input.
Optical Out
used to Connect to an audio system’s optical input.
DC 5v
Connect the 5 V/1 a dc power supply to the unit and plug the
adaptor to an ac wall outlet.
input select
selects the current audio source, either optical, coaxial or l/r.
Power
push the botton to turn the unit on or off. the device supports
last power memory function therefore, when power supply is
reconnected it will bring up the last power status.
3
left pannel

Troubleshooting
•Verify Power- ENsure power is plugged in correctly
•Verify Connections- Check that all cables are properly connected
Have a question or need assistance?
Don’t hesitate to contact us!
SUPPORT: [phone]
USA TOLL FREE: 877-886-5112
EMAIL: [e-mail]