AVPro Edge AC-DAC-CO2 User manual

Digital to Analog Audio Converter
AC-DAC-CO2
Quick Start Guide
The AC-DAC-CO2 is the second iteration of the Digital to Analog converter available from
AVPro Edge. This DAC provides a new, industrial-style chassis with an improved locking
barrel plug for a secure installation. It can accept digital (L)PCM signals up to 96KHz 24Bit,
converting them to an analog 20-20,000Hz PCM signal.
This quick start guide will be
going through:
• Installation
• Product breakdown
• Troubleshooting
Installation:
1. Connect the digital audio Input source to the desired input on the AC-DAC-CO2.
2. SET the Input Source switch to the desired input on the AC-DAC-CO2.
3. Connect the analog RCA output to the desired Audio Playback device.
4. Connect power to the AC-DAC-CO2.
Product Breakdown:
Input side
1. Toslink Input: Connect to the Optical
audio source
2. Optical and Coax LEDs: These Leds will
illuminate according to which input is
Currently selected
3. Coax/Optical Switch: Select which
digital audio input is active and will be
converted to analog stereo (L/R) audio
4. Coaxial INPUT: Connect to the Coaxial digital audio source

Product Breakdown continued:
output side
1. l/r RCA output: ANalog Stereo output.
used to Connect to the input of your
audio device or display
2. DC 5V 1a: Connect the 5V DC power supply
to the unit and plug the adapter into an
AC wall outlet
Troubleshooting:
• No Audio – Ensure desired input is selected.
• No Audio – Ensure multichannel audio is not selected.
• No Audio – Ensure encoded bitstream audio is not selected (Dolby/DTS).
• No Power – Use Multimeter to Test 5V PSU.
Have a question or need assistance?
Don’t hesitate to contact us!
SUPPORT: [phone]
USA TOLL FREE: 877-886-5112
EMAIL: [e-mail]